feat: rename experimental-meta/-upgrade to meta/upgrade behind --experimental gate

.agents/notes/implemented/architecture/2026-07-28-launcher-owned-resume-identity.i18n.yaml

@@ -2,5 +2,5 @@
 # side as of the last confirmed-consistent state. Both languages carry equal authority;
 # after editing either side, bring the other along and re-record with:
 #   pnpm run verify-translation-pairing --write .agents/notes/implemented/architecture/2026-07-28-launcher-owned-resume-identity.md
-2026-07-28-launcher-owned-resume-identity.md: 167c9e848a9101c9d1e93cf3af968b00279db32b
-2026-07-28-launcher-owned-resume-identity.zh.md: 218b69581e65e8566ff1047603bb71c9537d3486
+2026-07-28-launcher-owned-resume-identity.md: da9b4571d154137d34ef3690e7b4aa9bc7bb9082
+2026-07-28-launcher-owned-resume-identity.zh.md: 51ccffd7bb9c8eeda03afe2528d3cb4250e2d906

.agents/notes/implemented/architecture/2026-07-28-launcher-owned-resume-identity.md

@@ -10,7 +10,7 @@ Two facts a launcher owns were shipped as deployment config keys on the TUI app
 
 Routing them through YAML made them silently droppable. `@cordisjs/plugin-include` applies a targeted patch by replacing whole top-level keys (`target[key] = value`), so a personal `~/.dsh/config.yaml` patching the `tui-agent` entry's `config` replaces the shipped block entirely. A user overlay written to change provider and model therefore deleted every resume key it did not restate, and nothing reported it: absent `resumeCommand` legitimately means "no fallback configured".
 
-Both failures were live in one real overlay. The exit hint stopped printing, because the overlay omitted `resumeCommand`. Worse, the overlay carried `resumeSessionId: !!js process.env.RESUME_SESSION_ID` — a stale line from before [the env-var bridge was removed](../../archived/architecture/2026-07-24-dsh-commander-argument-adapter.md) — which overwrote the shipped `!!js "typeof resumeSessionId === 'string' ? …"` intake with a read of a variable nothing sets. `dsh --resume <valid-id>` then started a *fresh* session and said nothing, reproduced directly: the banner showed a newly minted id, not the requested one. The [`dsh experimental-meta`](../feature/2026-07-28-dsh-meta-source-workspace.md) note had recorded this silent resume as an unexplained pre-existing defect; the overlay's shallow replacement is the cause.
+Both failures were live in one real overlay. The exit hint stopped printing, because the overlay omitted `resumeCommand`. Worse, the overlay carried `resumeSessionId: !!js process.env.RESUME_SESSION_ID` — a stale line from before [the env-var bridge was removed](../../archived/architecture/2026-07-24-dsh-commander-argument-adapter.md) — which overwrote the shipped `!!js "typeof resumeSessionId === 'string' ? …"` intake with a read of a variable nothing sets. `dsh --resume <valid-id>` then started a *fresh* session and said nothing, reproduced directly: the banner showed a newly minted id, not the requested one. The [`dsh meta`](../feature/2026-07-28-dsh-meta-source-workspace.md) note had recorded this silent resume as an unexplained pre-existing defect; the overlay's shallow replacement is the cause.
 
 A config key cannot express these facts safely, because the deployment is not the authority on them.
 
@@ -25,7 +25,7 @@ Both sit beside the existing `tuiResumeHost` host capability, which set the prec
 
 Identity belongs to `agent-loop` because that is the plugin which creates configured agents, and because a patch replaces a row's whole `config`: an overlay repointing the agent row's model route would erase a launcher-set identity key. See [the shared-base overlay note](../simplification/2026-07-29-shared-base-config-overlays.md).
 
-`apps/cli` mints or selects the id and builds the line from the invocation it is reproducing, sharing one `resumeArgs` helper with the `/resume` execve handoff so the printed command and the in-place handoff cannot diverge. The line names `--config` when one was passed. Resume always re-enters the default surface through `dsh --resume <id>`; `dsh experimental-meta` accepts no options and always starts fresh.
+`apps/cli` mints or selects the id and builds the line from the invocation it is reproducing, sharing one `resumeArgs` helper with the `/resume` execve handoff so the printed command and the in-place handoff cannot diverge. The line names `--config` when one was passed. Resume always re-enters the default surface through `dsh --resume <id>`; `dsh meta` accepts no default-surface options and always starts fresh.
 
 **`ctx.provide` is the only channel from launcher argv into a Loader-mounted plugin.** Config `!!js` expressions evaluate as `with (entry.ctx) { eval(expr) }` (`vendor/loader/src/config/utils.ts`), so a bare identifier resolves against the entry's context and nothing else reaches it. The slot therefore cannot be removed while the app bundle is mounted from YAML; what changes is that it is now internal launcher↔app plumbing instead of a documented key a config author must wire correctly.
 

.agents/notes/implemented/architecture/2026-07-28-launcher-owned-resume-identity.zh.md

@@ -10,7 +10,7 @@ Status: implemented
 
 把它们经由 YAML 传递，使其可被静默丢弃。`@cordisjs/plugin-include` 施加定向补丁的方式是替换整个顶层键（`target[key] = value`），因此一份对 `tui-agent` 条目的 `config` 打补丁的个人 `~/.dsh/config.yaml`，会把交付时的整块内容整体替换掉。于是，一份为改动 provider 和 model 而写的用户 overlay，会删掉它未重述的每一个 resume 键，且没有任何东西报告这一点：缺失 `resumeCommand` 合法地意味着「未配置回退」。
 
-两处失效在同一份真实的 overlay 中同时存在。退出提示不再打印，因为该 overlay 省略了 `resumeCommand`。更糟的是，该 overlay 带着 `resumeSessionId: !!js process.env.RESUME_SESSION_ID`——一行来自 [env 变量桥被移除](../../archived/architecture/2026-07-24-dsh-commander-argument-adapter.md)之前的陈旧代码——它用一次对某个无人设置的变量的读取，覆盖掉了交付时的 `!!js "typeof resumeSessionId === 'string' ? …"` 入口。此后 `dsh --resume <valid-id>` 会开启一个*全新*会话且什么都不说，并被直接复现：banner 显示的是一个新铸造的 id，而非所请求的那个。[`dsh experimental-meta`](../feature/2026-07-28-dsh-meta-source-workspace.md) note 曾把这次静默的 resume 记为一处无法解释的既有缺陷；而 overlay 的浅层替换正是其成因。
+两处失效在同一份真实的 overlay 中同时存在。退出提示不再打印，因为该 overlay 省略了 `resumeCommand`。更糟的是，该 overlay 带着 `resumeSessionId: !!js process.env.RESUME_SESSION_ID`——一行来自 [env 变量桥被移除](../../archived/architecture/2026-07-24-dsh-commander-argument-adapter.md)之前的陈旧代码——它用一次对某个无人设置的变量的读取，覆盖掉了交付时的 `!!js "typeof resumeSessionId === 'string' ? …"` 入口。此后 `dsh --resume <valid-id>` 会开启一个*全新*会话且什么都不说，并被直接复现：banner 显示的是一个新铸造的 id，而非所请求的那个。[`dsh meta`](../feature/2026-07-28-dsh-meta-source-workspace.md) note 曾把这次静默的 resume 记为一处无法解释的既有缺陷；而 overlay 的浅层替换正是其成因。
 
 一个配置键无法安全地表达这些事实，因为部署方并非它们的权威。
 
@@ -25,7 +25,7 @@ Status: implemented
 
 身份归属于 `agent-loop`，因为它才是创建所配置 agent 的插件；也因为 patch 会整体替换配置项的 `config`：重新指向 agent 配置项模型路由的 overlay 会抹掉启动器设置的身份键。参见[共享 base overlay note](../simplification/2026-07-29-shared-base-config-overlays.md)。
 
-`apps/cli` 铸造或选定 id，并依据它所复现的那次调用构建该行，与 `/resume` 的 execve 移交共用同一个 `resumeArgs` 助手，从而使打印出的命令与原地移交不会分歧。该行会在传入了 `--config` 时将其写入命令。恢复始终通过 `dsh --resume <id>` 重新进入默认界面；`dsh experimental-meta` 不接受任何选项，并且总是启动新会话。
+`apps/cli` 铸造或选定 id，并依据它所复现的那次调用构建该行，与 `/resume` 的 execve 移交共用同一个 `resumeArgs` 助手，从而使打印出的命令与原地移交不会分歧。该行会在传入了 `--config` 时将其写入命令。恢复始终通过 `dsh --resume <id>` 重新进入默认界面；`dsh meta` 不接受任何默认界面选项，并且总是启动新会话。
 
 **`ctx.provide` 是从启动器 argv 进入被 Loader 挂载的插件的唯一通道。** 配置的 `!!js` 表达式会以 `with (entry.ctx) { eval(expr) }`（`vendor/loader/src/config/utils.ts`）求值，因此一个裸标识符会针对该条目的上下文解析，别无它物可达。于是只要应用 bundle 仍从 YAML 挂载，这个槽位就无法被移除；变化之处在于它现在是启动器↔应用之间的内部管线，而不再是一个配置作者必须正确接线的、有文档记载的键。
 

.agents/notes/implemented/feature/2026-07-28-dsh-guided-skill-session-commands.i18n.yaml

@@ -2,5 +2,5 @@
 # side as of the last confirmed-consistent state. Both languages carry equal authority;
 # after editing either side, bring the other along and re-record with:
 #   pnpm run verify-translation-pairing --write .agents/notes/implemented/feature/2026-07-28-dsh-guided-skill-session-commands.md
-2026-07-28-dsh-guided-skill-session-commands.md: 9d5341880e92d88781278238f21380919c962820
-2026-07-28-dsh-guided-skill-session-commands.zh.md: 90c47d64173161fa4ef1f975de37b9cd42e02c99
+2026-07-28-dsh-guided-skill-session-commands.md: 241bf3c0af693f3ccc318bf44bbeccb6c5d73d94
+2026-07-28-dsh-guided-skill-session-commands.zh.md: f74b2540889900a01b7590344a3bff62e8a9fe4a

.agents/notes/implemented/feature/2026-07-28-dsh-guided-skill-session-commands.md

@@ -1,4 +1,4 @@
-# Agent Note: `dsh migrate`/`dsh experimental-upgrade` seed the first turn with a skill
+# Agent Note: `dsh migrate`/`dsh upgrade` seed the first turn with a skill
 
 Status: implemented
 
@@ -10,13 +10,13 @@ Two recurring flows begin with the user manually invoking one skill and answerin
 
 ## Decision
 
-`dsh migrate` and `dsh experimental-upgrade` boot the ordinary TUI as a fresh session whose first turn auto-invokes a bundled skill (`dsh-migrate`, `dsh-upgrade`), exactly as if the user typed `/skill:<name>` and pressed Enter.
+`dsh migrate` and `dsh upgrade` boot the ordinary TUI as a fresh session whose first turn auto-invokes a bundled skill (`dsh-migrate`, `dsh-upgrade`), exactly as if the user typed `/skill:<name>` and pressed Enter.
 
 The seed reuses the existing TUI skill path, not a new one. `createTuiChat` already has `invokeSkill(name, instructions)` — the code a typed `/skill:<name>` runs, including the "Unknown skill" notice. The launcher passes the skill name to the TUI through a new boot-context slot `INITIAL_SKILL_KEY` (`tuiInitialSkill`), mirroring `CONFIGURED_AGENT_IDENTITIES_KEY`/`TUI_GOODBYE_MESSAGE_KEY`: `ctx.provide` is the only channel from launcher argv into a Loader-mounted plugin. The TUI's `apply()` reads the slot and folds it into `config.initialSkill`; after `ui.start()` succeeds, `createTuiChat` fires `invokeSkill(config.initialSkill, '')` once when set.
 
 **Freshness is gated in the launcher, not the TUI.** `runSkillSession` always mints a fresh session and provides the slot only when `resumeSessionId === undefined`, so a later `dsh --resume <id>` of that session is an ordinary TUI session with no re-injection. The TUI stays generic: it invokes whatever skill it is handed, once, at startup.
 
-**`migrate`/`upgrade` take no options.** Unlike `meta`, they carry no `--resume`, `--config`, or `-p`; a guided fresh-session entry has nothing to resume or reconfigure. Any leaked default-surface option fails loud, matching the `web`/`meta` rejection pattern in the Commander adapter. The two modes share one `SkillSessionInvocation` discriminant (`mode: 'migrate' | 'upgrade'`); `bin.ts` maps the mode to `dsh-${mode}`.
+**`migrate`/`upgrade` take no options beyond the [experimental gate](2026-07-31-experimental-subcommand-gate.md)'s `--experimental`.** They carry no `--resume`, `--config`, or `-p`; a guided fresh-session entry has nothing to resume or reconfigure. Any leaked default-surface option fails loud, matching the `web`/`meta` rejection pattern in the Commander adapter. The two modes share one `SkillSessionInvocation` discriminant (`mode: 'migrate' | 'upgrade'`); `bin.ts` maps the mode to `dsh-${mode}`.
 
 The `dsh-migrate` skill is bundled under `skills/` (shipped through `DSH_BUNDLED_SKILL_DIR`, like `dsh-upgrade`). It asks which source agent (opencode/pi/Claude Code/Codex) if unstated, then maps each capability — workspace instructions, personal overlay, skills, hooks, MCP, API/env — to its DSH equivalent, grounded in the actual repo surfaces (the `hooks-claude`/`hooks-codex` bridges, `~/.dsh/{config.yaml,.env,AGENTS.md,skills/}`, `AGENTS.md`/`CLAUDE.md`, `mcporter`), and states plainly when a capability has no equivalent.
 
@@ -26,7 +26,7 @@ The `dsh-migrate` skill is bundled under `skills/` (shipped through `DSH_BUNDLED
 
 `packages/ui/tui/tests/tui.spec.ts` gains two fake-terminal cases in the existing skill describe block: `config.initialSkill` set delivers the rendered skill body as the first turn with no user input, and an unknown initial skill reports a notice without sending. `runSkillSession` itself is composition inside the module's `v8 ignore` block, like `runTui`/`runMeta`.
 
-No keyless PTY snapshot: per the maintainer's scope call for this change, unit coverage plus interactive verification suffices, and the seed rides the already-snapshotted `/skill:` render path. Both commands were verified interactively in tmux from a scratch cwd: `dsh migrate` loaded `dsh-migrate` and asked which source agent; `dsh experimental-upgrade` loaded `dsh-upgrade`, which pulled in `dsh-customize` and began checkout discovery.
+No keyless PTY snapshot: per the maintainer's scope call for this change, unit coverage plus interactive verification suffices, and the seed rides the already-snapshotted `/skill:` render path. Both commands were verified interactively in tmux from a scratch cwd: `dsh migrate` loaded `dsh-migrate` and asked which source agent; `dsh upgrade` loaded `dsh-upgrade`, which pulled in `dsh-customize` and began checkout discovery.
 
 ## Alternatives considered
 

.agents/notes/implemented/feature/2026-07-28-dsh-guided-skill-session-commands.zh.md

@@ -1,4 +1,4 @@
-# Agent Note：`dsh migrate`/`dsh experimental-upgrade` 以 skill 播种首轮
+# Agent Note：`dsh migrate`/`dsh upgrade` 以 skill 播种首轮
 
 Status: implemented
 
@@ -10,13 +10,13 @@ Status: implemented
 
 ## 决策
 
-`dsh migrate` 与 `dsh experimental-upgrade` 以全新会话启动普通 TUI，其首轮自动调用一个内置 skill（`dsh-migrate`、`dsh-upgrade`），效果等同于用户键入 `/skill:<name>` 并回车。
+`dsh migrate` 与 `dsh upgrade` 以全新会话启动普通 TUI，其首轮自动调用一个内置 skill（`dsh-migrate`、`dsh-upgrade`），效果等同于用户键入 `/skill:<name>` 并回车。
 
 播种复用现有的 TUI skill 路径，而非新增一条。`createTuiChat` 已有 `invokeSkill(name, instructions)`——即键入 `/skill:<name>` 所走的代码，包含“未知 skill”通知。启动器通过一个新的启动上下文槽 `INITIAL_SKILL_KEY`（`tuiInitialSkill`）把 skill 名称传给 TUI，与 `CONFIGURED_AGENT_IDENTITIES_KEY`/`TUI_GOODBYE_MESSAGE_KEY` 一致：`ctx.provide` 是从启动器 argv 进入 Loader 挂载插件的唯一通道。TUI 的 `apply()` 读取该槽并折叠进 `config.initialSkill`；`ui.start()` 成功后，`createTuiChat` 在其被设置时调用一次 `invokeSkill(config.initialSkill, '')`。
 
 **新鲜性在启动器而非 TUI 中把关。** `runSkillSession` 总是创建全新会话，且仅在 `resumeSessionId === undefined` 时提供该槽，因此之后 `dsh --resume <id>` 恢复该会话时是普通 TUI 会话，不会重复注入。TUI 保持通用：它只是把接到的 skill 在启动时调用一次。
 
-**`migrate`/`upgrade` 不接受任何选项。** 与 `meta` 不同，它们不带 `--resume`、`--config` 或 `-p`；引导式全新会话入口没有可恢复或可重配置的内容。任何泄漏的默认界面选项都会明确报错，与 Commander 适配器中 `web`/`meta` 的拒绝模式一致。两个 mode 共用一个 `SkillSessionInvocation` 判别式（`mode: 'migrate' | 'upgrade'`）；`bin.ts` 将 mode 映射为 `dsh-${mode}`。
+**`migrate`/`upgrade` 除[实验性门槛](2026-07-31-experimental-subcommand-gate.md)的 `--experimental` 外不接受任何选项。** 它们不带 `--resume`、`--config` 或 `-p`；引导式全新会话入口没有可恢复或可重配置的内容。任何泄漏的默认界面选项都会明确报错，与 Commander 适配器中 `web`/`meta` 的拒绝模式一致。两个 mode 共用一个 `SkillSessionInvocation` 判别式（`mode: 'migrate' | 'upgrade'`）；`bin.ts` 将 mode 映射为 `dsh-${mode}`。
 
 `dsh-migrate` skill 内置于 `skills/`（经 `DSH_BUNDLED_SKILL_DIR` 交付，与 `dsh-upgrade` 相同）。若未说明源 agent，它会先询问是哪个（opencode/pi/Claude Code/Codex），再把每项能力——workspace 指令、个人覆盖、skills、hooks、MCP、API/env——映射到对应的 DSH 等价物，并基于仓库实际的表面（`hooks-claude`/`hooks-codex` 桥、`~/.dsh/{config.yaml,.env,AGENTS.md,skills/}`、`AGENTS.md`/`CLAUDE.md`、`mcporter`）落地；当某能力无等价物时明确说明。
 
@@ -26,7 +26,7 @@ Status: implemented
 
 `packages/ui/tui/tests/tui.spec.ts` 在既有 skill describe 块中新增两个伪终端用例：设置 `config.initialSkill` 时无需用户输入即把渲染后的 skill 正文作为首轮投递；未知的初始 skill 以通知形式报告且不发送。`runSkillSession` 本身是模块 `v8 ignore` 块内的组装，与 `runTui`/`runMeta` 相同。
 
-无 keyless PTY 快照：依据维护者对本次改动的范围裁定，单元覆盖加交互式验证已足够，且播种走的是已有快照的 `/skill:` 渲染路径。两个命令均已在 tmux 中从临时 cwd 交互式验证：`dsh migrate` 加载 `dsh-migrate` 并询问源 agent；`dsh experimental-upgrade` 加载 `dsh-upgrade`，后者引入 `dsh-customize` 并开始 checkout 发现。
+无 keyless PTY 快照：依据维护者对本次改动的范围裁定，单元覆盖加交互式验证已足够，且播种走的是已有快照的 `/skill:` 渲染路径。两个命令均已在 tmux 中从临时 cwd 交互式验证：`dsh migrate` 加载 `dsh-migrate` 并询问源 agent；`dsh upgrade` 加载 `dsh-upgrade`，后者引入 `dsh-customize` 并开始 checkout 发现。
 
 ## 考虑过的替代方案
 

.agents/notes/implemented/feature/2026-07-28-dsh-meta-source-workspace.i18n.yaml

@@ -2,5 +2,5 @@
 # side as of the last confirmed-consistent state. Both languages carry equal authority;
 # after editing either side, bring the other along and re-record with:
 #   pnpm run verify-translation-pairing --write .agents/notes/implemented/feature/2026-07-28-dsh-meta-source-workspace.md
-2026-07-28-dsh-meta-source-workspace.md: be414ddbf63dd95791f9ca956b2f345b1fc8c685
-2026-07-28-dsh-meta-source-workspace.zh.md: 86fc135db290766cb6fc2abefb194120416bfd9d
+2026-07-28-dsh-meta-source-workspace.md: ab6050150f6321197686e1ad649555d3eaa7c374
+2026-07-28-dsh-meta-source-workspace.zh.md: c6f570498f10f16746b7aa5756b2e04074ae6a9e

.agents/notes/implemented/feature/2026-07-28-dsh-meta-source-workspace.md

@@ -1,4 +1,4 @@
-# Agent Note: `dsh experimental-meta` boots the TUI over the harness checkout
+# Agent Note: `dsh meta` boots the TUI over the harness checkout
 
 Status: implemented
 
@@ -10,19 +10,19 @@ English | [中文](2026-07-28-dsh-meta-source-workspace.zh.md)
 
 ## Decision
 
-`dsh experimental-meta` boots the ordinary TUI with the harness checkout as the workspace, from any directory.
+`dsh meta` boots the ordinary TUI with the harness checkout as the workspace, from any directory.
 
 The target is `SOURCE_ROOT` in `apps/cli/src/tui.ts` — `fileURLToPath(new URL('../../..', import.meta.url))`, three hops up from `apps/cli/{src,lib}` — the same constant the `harness:source` prompt section already names, so the workspace and the path advertised to the model cannot drift. It follows the launcher's real path, so a PATH symlink through `current` resolves to whichever staging worktree is active.
 
-The mechanism is one `process.chdir(workspace)` inside `runTui`, guarded by an optional third parameter that only the `experimental-meta` dispatch passes. The cwd *is* the workspace seam in the shipped tree: `examples/tui-agent/cordis.yml` derives the session cwd (`!!js process.cwd()`), the `./.sessions` persistence root, and the HMR watch root (`root: ['.']`) from it, so one chdir moves all three together and meta sessions land in the checkout's gitignored `.sessions/`. It runs after both `.env` layers are loaded — the bin's invoking-directory load and the personal one — so the ambient > project > personal precedence is untouched. `DEFAULT_CONFIG` and `SOURCE_ROOT` are absolute and TUI mode passes no snapshot mode, so config resolution is chdir-independent.
+The mechanism is one `process.chdir(workspace)` inside `runTui`, guarded by an optional third parameter that only the `meta` dispatch passes. The cwd *is* the workspace seam in the shipped tree: `examples/tui-agent/cordis.yml` derives the session cwd (`!!js process.cwd()`), the `./.sessions` persistence root, and the HMR watch root (`root: ['.']`) from it, so one chdir moves all three together and meta sessions land in the checkout's gitignored `.sessions/`. It runs after both `.env` layers are loaded — the bin's invoking-directory load and the personal one — so the ambient > project > personal precedence is untouched. `DEFAULT_CONFIG` and `SOURCE_ROOT` are absolute and TUI mode passes no snapshot mode, so config resolution is chdir-independent.
 
-`experimental-meta` always starts a fresh session and accepts no options. `--config` would boot a foreign tree against the harness workspace, which is the default surface's `--config` case rather than this command; `-p` is not interactive, and resume re-enters the persisted session's own workspace through `dsh --resume <id>`. Any leaked default-surface option fails loud.
+`meta` always starts a fresh session and accepts no default-surface options; its only option is the [experimental gate](2026-07-31-experimental-subcommand-gate.md)'s `--experimental`. `--config` would boot a foreign tree against the harness workspace, which is the default surface's `--config` case rather than this command; `-p` is not interactive, and resume re-enters the persisted session's own workspace through `dsh --resume <id>`. Any leaked default-surface option fails loud.
 
 ## Testing
 
-`apps/cli/tests/args.spec.ts` pins routing for `experimental-meta`, rejection of every leaked default-surface option, and rejection of the former `meta` name. The dispatch itself is composition inside `bin.ts`'s existing `v8 ignore` block.
+`apps/cli/tests/args.spec.ts` pins routing for `meta`, rejection of every leaked default-surface option, and rejection of the former `experimental-meta` name. The dispatch itself is composition inside `bin.ts`'s existing `v8 ignore` block.
 
-There is no keyless PTY smoke for this mode. The smoke harness gives each run a temp cwd, but `dsh experimental-meta` deliberately chdirs to the real checkout, so a smoke would write `.sessions/` into the live tree mid-test. Covering it properly needs an injectable target directory — a test-only seam this note declines to add for a one-line chdir.
+There is no keyless PTY smoke for this mode. The smoke harness gives each run a temp cwd, but `dsh meta` deliberately chdirs to the real checkout, so a smoke would write `.sessions/` into the live tree mid-test. Covering it properly needs an injectable target directory — a test-only seam this note declines to add for a one-line chdir.
 
 The mode was verified interactively instead. Launched from `$HOME`, a `pwd` tool call reports the checkout, git resolves to its branch, the session log lands under the checkout's `.sessions/` (leaving `~/.sessions` untouched and the tree free of unignored residue), and plain `dsh` from another directory still uses the invoking one.
 
@@ -30,12 +30,12 @@ The mode was verified interactively instead. Launched from `$HOME`, a `pwd` tool
 
 **Thread an explicit workspace through `boot` and the config tree.** Avoids mutating process-wide state, but the shipped config reads the cwd in three places (`!!js process.cwd()`, `persistenceRoot`, HMR `root`), so each would need its own new plumbing and config key to stay consistent. `chdir` before boot expresses "this is the workspace" once, at the seam that already means it.
 
-**An `--experimental-meta` flag on the default surface.** Rejected: the default surface is option-only so that subcommands do not collide with a positional, and a flag that silently relocates the workspace reads as a modifier of the current directory rather than a different target. `experimental-meta` alongside `web` matches the existing shape.
+**An `--experimental-meta` flag on the default surface.** Rejected: the default surface is option-only so that subcommands do not collide with a positional, and a flag that silently relocates the workspace reads as a modifier of the current directory rather than a different target. `meta` alongside `web` matches the existing shape.
 
 **Resolve `~/.dsh/source/current` instead of the launcher's own path.** Rejected: it would diverge from the `harness:source` prompt path whenever a non-installed checkout's `bin/dsh` is invoked directly, telling the model one source root while working in another.
 
 ## Consequences
 
-Starting a session on dsh's own source is `dsh experimental-meta` from anywhere, and the workspace is guaranteed to be the same checkout the model is told about. The command always starts fresh; an ordinary `dsh --resume <id>` later restores the session and enters its persisted workspace.
+Starting a session on dsh's own source is `dsh meta` from anywhere, and the workspace is guaranteed to be the same checkout the model is told about. The command always starts fresh; an ordinary `dsh --resume <id>` later restores the session and enters its persisted workspace.
 
 `runTui` gains an optional third parameter, so the workspace override is visible at the one function that owns TUI composition rather than hidden in a second copy of it.

.agents/notes/implemented/feature/2026-07-28-dsh-meta-source-workspace.zh.md

@@ -1,4 +1,4 @@
-# Agent Note：`dsh experimental-meta` 以 harness 检出为 workspace 启动 TUI
+# Agent Note：`dsh meta` 以 harness 检出为 workspace 启动 TUI
 
 Status: implemented
 
@@ -10,19 +10,19 @@ Status: implemented
 
 ## Decision
 
-`dsh experimental-meta` 在任意目录下都以 harness 检出为 workspace 启动普通 TUI。
+`dsh meta` 在任意目录下都以 harness 检出为 workspace 启动普通 TUI。
 
 目标是 `apps/cli/src/tui.ts` 中的 `SOURCE_ROOT`——`fileURLToPath(new URL('../../..', import.meta.url))`，从 `apps/cli/{src,lib}` 向上三级——与 `harness:source` 提示词段所用的常量完全相同，因此 workspace 与告知模型的路径不可能发生偏离。它跟随启动器的真实路径，所以经由 `current` 的 PATH 符号链接会解析到当前生效的那个 staging 工作树。
 
-机制是 `runTui` 内的一次 `process.chdir(workspace)`，由一个可选第三参数把守，只有 `experimental-meta` 分派会传入。在已交付的配置树中，cwd *就是* workspace 的接缝：`examples/tui-agent/cordis.yml` 由它派生出会话 cwd（`!!js process.cwd()`）、`./.sessions` 持久化根目录以及 HMR 监视根目录（`root: ['.']`），因此一次 chdir 会让三者一并移动，meta 会话则落在检出目录中被 gitignore 的 `.sessions/` 内。它在两层 `.env` 都加载之后执行——bin 对调用目录的加载与个人层加载——因此“环境中已有的值 > 项目 > 个人”的优先级不受影响。`DEFAULT_CONFIG` 与 `SOURCE_ROOT` 都是绝对路径，且 TUI 模式不传 snapshot mode，所以配置解析与 chdir 无关。
+机制是 `runTui` 内的一次 `process.chdir(workspace)`，由一个可选第三参数把守，只有 `meta` 分派会传入。在已交付的配置树中，cwd *就是* workspace 的接缝：`examples/tui-agent/cordis.yml` 由它派生出会话 cwd（`!!js process.cwd()`）、`./.sessions` 持久化根目录以及 HMR 监视根目录（`root: ['.']`），因此一次 chdir 会让三者一并移动，meta 会话则落在检出目录中被 gitignore 的 `.sessions/` 内。它在两层 `.env` 都加载之后执行——bin 对调用目录的加载与个人层加载——因此“环境中已有的值 > 项目 > 个人”的优先级不受影响。`DEFAULT_CONFIG` 与 `SOURCE_ROOT` 都是绝对路径，且 TUI 模式不传 snapshot mode，所以配置解析与 chdir 无关。
 
-`experimental-meta` 始终启动新会话，且不接受任何选项。`--config` 会针对 harness workspace 启动其他配置树，那是默认界面的 `--config` 场景，而不是该命令的场景；`-p` 并非交互式，恢复则通过 `dsh --resume <id>` 重新进入已持久化会话自身的 workspace。任何泄漏的默认界面选项都会明确报错。
+`meta` 始终启动新会话，且不接受任何默认界面选项；它唯一的选项是[实验性门槛](2026-07-31-experimental-subcommand-gate.md)的 `--experimental`。`--config` 会针对 harness workspace 启动其他配置树，那是默认界面的 `--config` 场景，而不是该命令的场景；`-p` 并非交互式，恢复则通过 `dsh --resume <id>` 重新进入已持久化会话自身的 workspace。任何泄漏的默认界面选项都会明确报错。
 
 ## Testing
 
-`apps/cli/tests/args.spec.ts` 钉住 `experimental-meta` 的路由、对每个泄漏的默认界面选项的拒绝，以及对旧名称 `meta` 的拒绝。该分派本身是 `bin.ts` 既有 `v8 ignore` 块内的组合代码。
+`apps/cli/tests/args.spec.ts` 钉住 `meta` 的路由、对每个泄漏的默认界面选项的拒绝，以及对旧名称 `experimental-meta` 的拒绝。该分派本身是 `bin.ts` 既有 `v8 ignore` 块内的组合代码。
 
-该 mode 没有 keyless PTY 冒烟测试。冒烟框架会为每次运行提供临时 cwd，但 `dsh experimental-meta` 刻意 chdir 到真实检出目录，因此冒烟测试会在测试中途把 `.sessions/` 写入实际工作树。要正确覆盖它需要一个可注入的目标目录——为了一行 chdir 而引入的测试专用 seam，本 note 不予采纳。
+该 mode 没有 keyless PTY 冒烟测试。冒烟框架会为每次运行提供临时 cwd，但 `dsh meta` 刻意 chdir 到真实检出目录，因此冒烟测试会在测试中途把 `.sessions/` 写入实际工作树。要正确覆盖它需要一个可注入的目标目录——为了一行 chdir 而引入的测试专用 seam，本 note 不予采纳。
 
 取而代之的是交互式验证。从 `$HOME` 启动后，`pwd` 工具调用报告的是该检出目录，git 解析到其分支，会话日志落在该检出的 `.sessions/` 下（`~/.sessions` 未被触及，工作树也没有未被忽略的残留），并且从其他目录运行的普通 `dsh` 仍使用调用目录。
 
@@ -30,12 +30,12 @@ Status: implemented
 
 **通过 `boot` 与配置树显式传递 workspace。** 这可避免修改进程级状态，但已交付的配置在三处读取 cwd（`!!js process.cwd()`、`persistenceRoot`、HMR `root`），每一处都需要各自新增管线与配置键才能保持一致。启动前 chdir 只在本就表达该含义的接缝上表达一次“这就是 workspace”。
 
-**在默认界面上加一个 `--experimental-meta` 标志。** 拒绝：默认界面是纯选项形式，以免子命令与位置参数冲突；而一个会静默改变 workspace 的标志读起来像是对当前目录的修饰，而非另一个目标。`experimental-meta` 与 `web` 并列符合既有形态。
+**在默认界面上加一个 `--experimental-meta` 标志。** 拒绝：默认界面是纯选项形式，以免子命令与位置参数冲突；而一个会静默改变 workspace 的标志读起来像是对当前目录的修饰，而非另一个目标。`meta` 与 `web` 并列符合既有形态。
 
 **解析 `~/.dsh/source/current` 而非启动器自身路径。** 拒绝：当直接调用某个非安装检出的 `bin/dsh` 时，它会与 `harness:source` 提示词路径产生偏离——告知模型一个源码根目录，却在另一个目录中工作。
 
 ## Consequences
 
-在 dsh 自身源码上开启会话变成了在任意位置执行 `dsh experimental-meta`，且该 workspace 必然就是告知模型的那个检出目录。该命令始终启动新会话；之后，普通的 `dsh --resume <id>` 会恢复该会话并进入其已持久化的 workspace。
+在 dsh 自身源码上开启会话变成了在任意位置执行 `dsh meta`，且该 workspace 必然就是告知模型的那个检出目录。该命令始终启动新会话；之后，普通的 `dsh --resume <id>` 会恢复该会话并进入其已持久化的 workspace。
 
 `runTui` 新增一个可选第三参数，因此 workspace 覆盖是在拥有 TUI 组合逻辑的那唯一一个函数上可见的，而不是隐藏在它的第二份副本中。

.agents/notes/implemented/feature/2026-07-28-skill-invocation-policy.i18n.yaml

@@ -2,5 +2,5 @@
 # side as of the last confirmed-consistent state. Both languages carry equal authority;
 # after editing either side, bring the other along and re-record with:
 #   pnpm run verify-translation-pairing --write .agents/notes/implemented/feature/2026-07-28-skill-invocation-policy.md
-2026-07-28-skill-invocation-policy.md: e639db39c0e971ea6988ef6e9801ab71f8d1337f
-2026-07-28-skill-invocation-policy.zh.md: 7e68f2cf28fbaa734dff477441fc8ab73e7367b7
+2026-07-28-skill-invocation-policy.md: f74b0bcfddb1699c48279b4d8b153cabf764b140
+2026-07-28-skill-invocation-policy.zh.md: 1a7117a382be224c5371964dd4ad3e916d4e0917

.agents/notes/implemented/feature/2026-07-28-skill-invocation-policy.md

@@ -18,7 +18,7 @@ The local parser also exposed an internal camel-case spelling as frontmatter. Su
 
 The local provider accepts the exact kebab-case frontmatter keys `disable-model-invocation` and `user-invocable`. It accepts YAML booleans plus case-insensitive `true`/`false`, `yes`/`no`, `on`/`off`, and `1`/`0`, matching the practical boolean forms accepted by Claude skills. It maps `disable-model-invocation` to the inverse positive field and fills both positive fields from their defaults even when neither key is present. A camel-case external spelling or non-boolean invocation value drops the entire skill from discovery with a targeted warning; this pre-release repository does not keep an on-disk compatibility alias. Invocation data fails closed because ignoring it would default to permission and could expose the skill on a disabled surface, while wrong-typed optional `whenToUse` and `metadata` values are omitted because they do not decide invocation.
 
-The model-facing `dsh-tool-skill` catalog and loader enforce `isModelInvocable`. The TUI `/skill:` autocomplete and exact loader enforce the user field locally, so a user-only skill is visible and loadable there even when it is absent from model discovery, without turning the optional skill peer into a runtime import. The launcher-seeded initial skill used by guided `dsh migrate` and `dsh experimental-upgrade` sessions follows this same TUI path and must remain user-invocable. The browser `skill.list` RPC serves a user-selected reference that still asks the model to load the skill, so it exposes the intersection of model- and user-invocable skills; no direct browser skill-loading RPC is added.
+The model-facing `dsh-tool-skill` catalog and loader enforce `isModelInvocable`. The TUI `/skill:` autocomplete and exact loader enforce the user field locally, so a user-only skill is visible and loadable there even when it is absent from model discovery, without turning the optional skill peer into a runtime import. The launcher-seeded initial skill used by guided `dsh migrate` and `dsh upgrade` sessions follows this same TUI path and must remain user-invocable. The browser `skill.list` RPC serves a user-selected reference that still asks the model to load the skill, so it exposes the intersection of model- and user-invocable skills; no direct browser skill-loading RPC is added.
 
 These rules permit all four combinations:
 

.agents/notes/implemented/feature/2026-07-28-skill-invocation-policy.zh.md

@@ -18,7 +18,7 @@ skill 注册表最初将发现操作视为模型目录：`ctx.skills.list()` 会
 
 本地提供方只接受拼写完全一致的 kebab-case frontmatter 键 `disable-model-invocation` 和 `user-invocable`。它接受 YAML 布尔值，以及不区分大小写的 `true`/`false`、`yes`/`no`、`on`/`off` 和 `1`/`0`，与 Claude skills 实际支持的布尔写法一致。它将 `disable-model-invocation` 映射为相反的正向字段，即使两个键都不存在，也会根据默认值填充两个正向字段。若使用外部驼峰式拼写或提供非布尔调用值，发现流程会丢弃整个 skill，并给出有针对性的警告；本仓库尚处于发布前阶段，因此不为磁盘格式保留兼容别名。调用数据校验遵循失败时默认拒绝原则，因为忽略这类数据会默认授予权限，可能使 skill 暴露在已禁用的接口上；与之不同，类型错误的可选 `whenToUse` 和 `metadata` 值会被省略，因为它们不参与调用判定。
 
-面向模型的 `dsh-tool-skill` 目录和 loader 执行 `isModelInvocable`。TUI 的 `/skill:` 自动补全与精确名称 loader 在本地执行用户字段，因此仅允许用户调用的 skill 即使不出现在模型发现结果中，仍会在此处显示并可加载，同时不会将可选的 skill peer 变成运行时导入。由 launcher 预置、供引导式 `dsh migrate` 和 `dsh experimental-upgrade` 会话使用的初始 skill 沿用同一条 TUI 路径，因此必须保持允许用户调用。浏览器的 `skill.list` RPC 提供的是由用户选择、但仍要求模型加载的引用，因此只公开同时允许模型和用户调用的 skill；本次改动不新增让浏览器直接加载 skill 的 RPC。
+面向模型的 `dsh-tool-skill` 目录和 loader 执行 `isModelInvocable`。TUI 的 `/skill:` 自动补全与精确名称 loader 在本地执行用户字段，因此仅允许用户调用的 skill 即使不出现在模型发现结果中，仍会在此处显示并可加载，同时不会将可选的 skill peer 变成运行时导入。由 launcher 预置、供引导式 `dsh migrate` 和 `dsh upgrade` 会话使用的初始 skill 沿用同一条 TUI 路径，因此必须保持允许用户调用。浏览器的 `skill.list` RPC 提供的是由用户选择、但仍要求模型加载的引用，因此只公开同时允许模型和用户调用的 skill；本次改动不新增让浏览器直接加载 skill 的 RPC。
 
 这些规则允许以下四种组合：
 

.agents/notes/implemented/feature/2026-07-31-experimental-subcommand-gate.i18n.yaml

@@ -0,0 +1,6 @@
+# Bilingual-pair consistency record (docs/i18n/README.md): the git blob hash of each
+# side as of the last confirmed-consistent state. Both languages carry equal authority;
+# after editing either side, bring the other along and re-record with:
+#   pnpm run verify-translation-pairing --write .agents/notes/implemented/feature/2026-07-31-experimental-subcommand-gate.md
+2026-07-31-experimental-subcommand-gate.md: 4f38d8cd83ecae7b4e104a61acdb7acca98c071d
+2026-07-31-experimental-subcommand-gate.zh.md: 5fc2ff6513622c42e8b0eef711710a634f86870a

.agents/notes/implemented/feature/2026-07-31-experimental-subcommand-gate.md

@@ -0,0 +1,31 @@
+# Agent Note: experimental subcommands gate behind `--experimental` or `DSH_EXPERIMENTAL=1`
+
+Status: implemented
+
+English | [中文](2026-07-31-experimental-subcommand-gate.zh.md)
+
+## Problem
+
+The `meta` and `upgrade` entry points carried their experimental status in their names: `dsh experimental-meta` and `dsh experimental-upgrade`. The prefix made every invocation verbose, and renaming a command at stabilization would break every reference to it — muscle memory, scripts, and docs alike. The status belongs in an opt-in gate, not in the name.
+
+## Decision
+
+`dsh experimental-meta` is `dsh meta` and `dsh experimental-upgrade` is `dsh upgrade`. Each runs only when the invocation passes its `--experimental` flag or the environment carries `DSH_EXPERIMENTAL=1`; otherwise the command fails loud on stderr with exit 1, naming both opt-ins. Per the pre-release stance, the old names are gone with no aliases, and `args.spec.ts` pins their rejection.
+
+The gate has two halves with one owner each. The per-invocation half is a Commander `--experimental` option on each experimental subcommand, checked inside its action after the leaked-parent-option rejection. The environment half is a boolean `parseDshArgs` parameter: `bin.ts` reads `process.env.DSH_EXPERIMENTAL === '1'` at the process boundary and passes the result down, so the parser stays a pure function of its inputs and the tests need no env mutation. `1` is the only enabling value — the variable is an explicit opt-in, not a truthiness check.
+
+Stabilizing a command later means deleting its `--experimental` option and `requireExperimental` call; the name does not move.
+
+## Alternatives considered
+
+**Keep the `experimental-` name prefix.** Rejected by the user's direction: the prefix taxes every invocation, and stabilization would be a breaking rename instead of deleting a gate.
+
+**A parent-level `--experimental` flag (`dsh --experimental meta`).** Rejected: the default surface is deliberately option-only with `enablePositionalOptions`, so parent options that leak across the subcommand boundary are treated as mistyped invocations. A parent flag consumed only by two subcommands would be exactly the leaked-option shape the adapter rejects everywhere else.
+
+**Read `process.env` inside `parseDshArgs`.** Rejected: the repo validates at the process boundary and keeps typed seams pure; tests would have to mutate and restore `process.env` around each case.
+
+**Accept any non-empty `DSH_EXPERIMENTAL`.** Rejected: the telemetry switch prefers off-by-mistake for a privacy control, but an experimental gate is an acknowledgement — `DSH_EXPERIMENTAL=0` must not enable the commands it names.
+
+## Consequences
+
+Daily invocations shorten to `dsh meta --experimental` and `dsh upgrade --experimental`, and a developer who sets `DSH_EXPERIMENTAL=1` in their environment gets the bare `dsh meta`/`dsh upgrade`. `dsh --help` marks both commands `(experimental)`. The gate costs one extra flag or env var until a command stabilizes, at which point the gate is deleted and the name is already final.

.agents/notes/implemented/feature/2026-07-31-experimental-subcommand-gate.zh.md

@@ -0,0 +1,31 @@
+# Agent Note：实验性子命令由 `--experimental` 或 `DSH_EXPERIMENTAL=1` 把守
+
+Status: implemented
+
+[English](2026-07-31-experimental-subcommand-gate.md) | 中文
+
+## Problem
+
+`meta` 与 `upgrade` 两个入口把实验性状态写在名字里：`dsh experimental-meta` 和 `dsh experimental-upgrade`。前缀让每次调用都变得冗长，而在稳定时重命名命令会破坏对它的所有引用——肌肉记忆、脚本与文档皆然。这种状态应当由一个显式选择加入的门槛承载，而不是由名字承载。
+
+## Decision
+
+`dsh experimental-meta` 改为 `dsh meta`，`dsh experimental-upgrade` 改为 `dsh upgrade`。二者只有在调用时传入各自的 `--experimental` 标志、或环境中带有 `DSH_EXPERIMENTAL=1` 时才会运行；否则命令在 stderr 上明确报错并以退出码 1 结束，同时指明两种选择加入方式。依据发布前立场，旧名称已移除且没有别名，`args.spec.ts` 钉住了对它们的拒绝。
+
+该门槛分为两半，各有其归属。按调用的一半是每个实验性子命令上的 Commander `--experimental` 选项，在其 action 内、泄漏父级选项的拒绝之后检查。环境的一半是 `parseDshArgs` 的一个布尔参数：`bin.ts` 在进程边界读取 `process.env.DSH_EXPERIMENTAL === '1'` 并向下传递结果，因此解析器保持为其输入的纯函数，测试也无需改动环境变量。`1` 是唯一的启用值——该变量是显式的选择加入，而不是真值判断。
+
+之后要稳定某个命令，只需删除它的 `--experimental` 选项和 `requireExperimental` 调用；名字不再变动。
+
+## Alternatives considered
+
+**保留 `experimental-` 名称前缀。** 按用户的指示拒绝：前缀让每次调用都付出代价，稳定时也会变成破坏性的重命名，而不是删除一个门槛。
+
+**父级 `--experimental` 标志（`dsh --experimental meta`）。** 拒绝：默认界面刻意保持纯选项形式并启用 `enablePositionalOptions`，跨子命令边界泄漏的父级选项都被视为拼错的调用。一个只被两个子命令消费的父级标志，恰恰就是适配器在其他所有地方都拒绝的泄漏选项形态。
+
+**在 `parseDshArgs` 内部读取 `process.env`。** 拒绝：本仓库在进程边界做验证，并保持类型化接缝的纯粹性；否则测试必须在每个用例前后修改并恢复 `process.env`。
+
+**接受任何非空的 `DSH_EXPERIMENTAL`。** 拒绝：遥测开关作为隐私控制倾向于误关而非误开，但实验性门槛是一种确认——`DSH_EXPERIMENTAL=0` 绝不能启用它所指名的命令。
+
+## Consequences
+
+日常调用缩短为 `dsh meta --experimental` 和 `dsh upgrade --experimental`；在环境中设置了 `DSH_EXPERIMENTAL=1` 的开发者可以直接使用 `dsh meta`/`dsh upgrade`。`dsh --help` 将这两个命令标注为 `(experimental)`。在命令稳定之前，门槛的代价是一个额外的标志或环境变量；稳定时删除门槛即可，名字已是最终形态。

apps/cli/README.i18n.yaml

@@ -2,5 +2,5 @@
 # side as of the last confirmed-consistent state. Both languages carry equal authority;
 # after editing either side, bring the other along and re-record with:
 #   pnpm run verify-translation-pairing --write apps/cli/README.md
-README.md: 7ef24dc6290af5aafe3eb53609b090fcbfb83ce8
-README.zh.md: b19d4979351940e925db3b7a616a5c87689770a1
+README.md: 3d3e5413f208e57ba03b5b51c670e6eed4bad373
+README.zh.md: 66d467995a2257af067a4d877fcba426e88e840d

apps/cli/README.md

@@ -3,21 +3,21 @@
 English | [中文](README.zh.md)
 
 
-Argv is parsed once through a [Commander](https://github.com/tj/commander.js) adapter ([`src/args.ts`](src/args.ts)): one program whose default (no subcommand) is the TUI/headless surface (`--config`, `-p`/`--prompt`, `--resume`, `--dump-config`, `--dump-default-config`), whose `experimental-meta` subcommand is the same TUI over this checkout, whose `experimental-upgrade` subcommand is an option-less guided-session entry, and whose `web` subcommand is the browser UI. `src/bin.ts` switches on the resolved mode and dynamic-imports only that mode's module. `dsh --help` lists every mode and `dsh web --help` renders the web usage, `dsh --version` prints this app's version, and an unknown option or a mistyped `--resume` fails loud (stderr, exit 1) instead of misrouting. Every subcommand that shares no option with the default surface — `experimental-upgrade`, `web`, `experimental-meta` — rejects a leaked `--config`/`-p`/`--resume`/dump flag rather than running and dropping it. `dsh web`'s `--host`/`--port` are unvalidated pass-through overrides: the `dsh-host-webserver` schema is the single source of both the default (the shipped Web overlay value when a flag is absent) and validity, and rejects a bad value at boot. `--trusted-host` appends named authorities for the /api browser-trust fence; an all-interfaces bind additionally derives the machine's LAN IP literals itself ([`src/app-cli-entry.ts`](src/app-cli-entry.ts)), so the printed LAN URL works without flags.
+Argv is parsed once through a [Commander](https://github.com/tj/commander.js) adapter ([`src/args.ts`](src/args.ts)): one program whose default (no subcommand) is the TUI/headless surface (`--config`, `-p`/`--prompt`, `--resume`, `--dump-config`, `--dump-default-config`), whose `meta` subcommand is the same TUI over this checkout, whose `upgrade` subcommand is a guided-session entry, and whose `web` subcommand is the browser UI. `meta` and `upgrade` are experimental: each runs only with its `--experimental` flag or with `DSH_EXPERIMENTAL=1` in the environment, and fails loud (stderr, exit 1) otherwise. `src/bin.ts` switches on the resolved mode and dynamic-imports only that mode's module. `dsh --help` lists every mode and `dsh web --help` renders the web usage, `dsh --version` prints this app's version, and an unknown option or a mistyped `--resume` fails loud (stderr, exit 1) instead of misrouting. Every subcommand that shares no option with the default surface — `upgrade`, `web`, `meta` — rejects a leaked `--config`/`-p`/`--resume`/dump flag rather than running and dropping it. `dsh web`'s `--host`/`--port` are unvalidated pass-through overrides: the `dsh-host-webserver` schema is the single source of both the default (the shipped Web overlay value when a flag is absent) and validity, and rejects a bad value at boot. `--trusted-host` appends named authorities for the /api browser-trust fence; an all-interfaces bind additionally derives the machine's LAN IP literals itself ([`src/app-cli-entry.ts`](src/app-cli-entry.ts)), so the printed LAN URL works without flags.
 
 The TUI surface:
 
 - boots `base.cordis.yml` plus `tui.cordis.yml` through [`dsh-app-boot`](../../packages/ui/app-boot/README.md); `--config <path>` applies a patch-list overlay instead of the personal overlay, while `--config-replace <path>` boots that file as the complete tree;
 - resumes a persisted session with `dsh --resume <session-id>` and, when the Node host exposes `process.execve`, supplies the TUI's in-place handoff host: after selector preflight and current-session flush, the host disposes the app and replaces the process with a normalized resume invocation; runtimes without process replacement leave the session running and say so. This CLI owns session identity and the exit line rather than the config: it mints or selects the `main` session id and provides it, plus the exact command that reproduces this invocation, on the boot context ([`MAIN_SESSION_ID_KEY`](../../packages/ui/tui/README.md) and `TUI_GOODBYE_MESSAGE_KEY`). No `cordis.yml` key can drop resume, and a missing or unreadable id fails loud instead of creating a fresh session;
-- treats the **invoking directory** as the workspace — sessions, relative paths, and workspace instructions resolve from the cwd (`dsh experimental-meta` is the sole exception, below);
+- treats the **invoking directory** as the workspace — sessions, relative paths, and workspace instructions resolve from the cwd (`dsh meta` is the sole exception, below);
 - tells the agent where its own source lives: after boot it adds a prompt section naming this harness checkout, resolved from the launcher's real path so it holds under a PATH symlink and an arbitrary cwd, so the self-referential `cordis` toolset can read and modify it;
 - applies the personal overlay from `~/.dsh` (see [app-boot's Personal config](../../packages/ui/app-boot/README.md#personal-config)): `config.yaml` patches the booted tree, while `.env` there is the credential provider's own store (never hoisted into the environment, so keys stay rotatable). Environment precedence is ambient > project `.env`.
 - presents the [versioned first-run welcome](../../.agents/notes/implemented/feature/2026-07-30-versioned-tui-first-run-welcome.md) through the mounted TUI overlay service when its immutable marker is absent under `DSH_HOME`; only Enter creates that version's marker, while Escape, disposal, or process exit leaves it eligible. The official DeepSeek icon, responsive terminal rasters, all-locale Chinese copy, and notice version are static local owners; the overlay never writes a session event or model context.
 - registers bare `/compact`: while the agent is idle, it summarizes useful older history even below automatic pressure, rejects arguments, and reports success only after the standalone replacement bracket is durable. A prompt submitted during compaction keeps its queue identity and starts after that checkpoint; injected context remains visible.
 
-`dsh experimental-meta` is that same TUI with this harness checkout as the workspace, so working on dsh itself needs no `cd`. It chdirs to the checkout root — resolved from the launcher's real path, the same root the source-path prompt section names — after the environment is settled, so precedence is unchanged while the session cwd and HMR watch root move together. Experimental meta always starts a fresh session and accepts no default-surface options; use ordinary `dsh --resume <id>` to resume a persisted session.
+`dsh meta` is that same TUI with this harness checkout as the workspace, so working on dsh itself needs no `cd`. It chdirs to the checkout root — resolved from the launcher's real path, the same root the source-path prompt section names — after the environment is settled, so precedence is unchanged while the session cwd and HMR watch root move together. Meta always starts a fresh session and accepts no default-surface options; use ordinary `dsh --resume <id>` to resume a persisted session.
 
-`dsh experimental-upgrade` is a guided fresh-session entry over the default TUI surface: it mints a fresh session in the invoking directory and seeds its first turn with the bundled `dsh-upgrade` skill, exactly as if the user typed `/skill:<name>`. The launcher passes the skill name on the boot context ([`INITIAL_SKILL_KEY`](../../packages/ui/tui/README.md)), which the TUI auto-invokes once the chat is live. The command takes no options — `--config`, `-p`, and `--resume` fail loud — and seeds only on this first launch, so a later `dsh --resume <id>` of the session is an ordinary TUI session with no re-injection.
+`dsh upgrade` is a guided fresh-session entry over the default TUI surface: it mints a fresh session in the invoking directory and seeds its first turn with the bundled `dsh-upgrade` skill, exactly as if the user typed `/skill:<name>`. The launcher passes the skill name on the boot context ([`INITIAL_SKILL_KEY`](../../packages/ui/tui/README.md)), which the TUI auto-invokes once the chat is live. The command takes no options beyond the experimental gate — `--config`, `-p`, and `--resume` fail loud — and seeds only on this first launch, so a later `dsh --resume <id>` of the session is an ordinary TUI session with no re-injection.
 
 `dsh --dump-config` and `dsh web --dump-config` print the composed config tree — the shipped base, the surface overlay, and the `--config` or personal overlay, exactly the layers that surface would boot — as YAML on stdout and exit without booting; `--dump-default-config` stops at the surface overlay, so diffing the two shows precisely what the user layer changes. Each run of rows is preceded by a `# ==` comment naming the file it comes from and the layers that patched it (e.g. `# == base.cordis.yml, patched by tui.cordis.yml`), so the output shows provenance while staying one loadable document. Composition runs through the include's own patch algorithm and YAML dialect (`applyEntryPatches`/`entryListSchema` from `@cordisjs/plugin-include`), so the dump cannot drift from what boots; `!!js` expressions print verbatim and unevaluated, and a patch whose target row is absent is reported on stderr with its layer, mirroring the Loader's boot-time warning. Launcher-owned boot-context values (session identity, CLI-flag patches) are per-invocation facts outside the config tree and do not appear. The dump flags reject boot-only flags (`-p`, `--resume`, `--config-replace`) rather than silently ignoring them, and `--dump-default-config` takes no `--config`.
 

apps/cli/README.zh.md

@@ -3,21 +3,21 @@
 [English](README.md) | 中文
 
 
-Argv 只会通过 [Commander](https://github.com/tj/commander.js) 适配器（[`src/args.ts`](src/args.ts)）解析一次：同一个程序的默认形式（无子命令）是 TUI／无头界面（`--config`、`-p`/`--prompt`、`--resume`、`--dump-config`、`--dump-default-config`），`experimental-meta` 子命令是以本 checkout 为 workspace 的同一个 TUI，`experimental-upgrade` 子命令是无选项的引导会话入口，`web` 子命令则是浏览器 UI。`src/bin.ts` 按解析后的 mode 分支，仅动态导入该 mode 的模块。`dsh --help` 列出所有 mode，`dsh web --help` 渲染 Web 用法，`dsh --version` 打印此应用的版本；未知选项或拼错的 `--resume` 会明确报错（stderr，退出码 1），而不会被错路由。凡与默认界面不共享任何选项的子命令（`experimental-upgrade`、`web`、`experimental-meta`）都会拒绝泄漏进来的 `--config`/`-p`/`--resume`/dump 标志，而不会照常运行并丢弃它。`dsh web` 的 `--host`/`--port` 是未验证的直通覆盖：`dsh-host-webserver` schema 是默认值（标志缺失时使用已交付的 Web 覆盖层值）和有效性的唯一真源，并在启动时拒绝错误值。`--trusted-host` 为 /api 浏览器信任栅栏追加具名权威；全接口绑定还会自行推导本机的 LAN IP 字面量（[`src/app-cli-entry.ts`](src/app-cli-entry.ts)），因此打印出的 LAN URL 无需任何标志即可使用。
+Argv 只会通过 [Commander](https://github.com/tj/commander.js) 适配器（[`src/args.ts`](src/args.ts)）解析一次：同一个程序的默认形式（无子命令）是 TUI／无头界面（`--config`、`-p`/`--prompt`、`--resume`、`--dump-config`、`--dump-default-config`），`meta` 子命令是以本 checkout 为 workspace 的同一个 TUI，`upgrade` 子命令是引导会话入口，`web` 子命令则是浏览器 UI。`meta` 与 `upgrade` 是实验性命令：只有带上各自的 `--experimental` 标志或在环境中设置 `DSH_EXPERIMENTAL=1` 才会运行，否则明确报错（stderr，退出码 1）。`src/bin.ts` 按解析后的 mode 分支，仅动态导入该 mode 的模块。`dsh --help` 列出所有 mode，`dsh web --help` 渲染 Web 用法，`dsh --version` 打印此应用的版本；未知选项或拼错的 `--resume` 会明确报错（stderr，退出码 1），而不会被错路由。凡与默认界面不共享任何选项的子命令（`upgrade`、`web`、`meta`）都会拒绝泄漏进来的 `--config`/`-p`/`--resume`/dump 标志，而不会照常运行并丢弃它。`dsh web` 的 `--host`/`--port` 是未验证的直通覆盖：`dsh-host-webserver` schema 是默认值（标志缺失时使用已交付的 Web 覆盖层值）和有效性的唯一真源，并在启动时拒绝错误值。`--trusted-host` 为 /api 浏览器信任栅栏追加具名权威；全接口绑定还会自行推导本机的 LAN IP 字面量（[`src/app-cli-entry.ts`](src/app-cli-entry.ts)），因此打印出的 LAN URL 无需任何标志即可使用。
 
 TUI 界面：
 
 - 通过 [`dsh-app-boot`](../../packages/ui/app-boot/README.md) 启动 `base.cordis.yml` 与 `tui.cordis.yml`；`--config <path>` 应用一个补丁列表覆盖并替代个人覆盖，而 `--config-replace <path>` 将指定文件作为完整配置树启动；
 - 使用 `dsh --resume <session-id>` 恢复已持久化会话。当 Node 宿主公开 `process.execve` 时，还会提供 TUI 的原地移交宿主：选择器预检并刷新当前会话后，宿主会释放应用，并以规范化的恢复调用替换进程；不支持进程替换的运行时会让会话继续运行并给出提示。会话身份与退出行由本 CLI 拥有，而非由配置指定：它创建或选定 `main` 会话 id，并把该 id 以及可复现本次调用的确切命令一起提供到启动上下文（[`MAIN_SESSION_ID_KEY`](../../packages/ui/tui/README.md) 与 `TUI_GOODBYE_MESSAGE_KEY`）。任何 `cordis.yml` 键都无法移除恢复能力；缺失或无法读取的 id 会明确报错，而不会创建新会话；
-- 将 **调用目录** 视为 workspace：会话、相对路径和 workspace 指令都从 cwd 解析（`dsh experimental-meta` 是唯一例外，见下文）；
+- 将 **调用目录** 视为 workspace：会话、相对路径和 workspace 指令都从 cwd 解析（`dsh meta` 是唯一例外，见下文）；
 - 告知 agent 自身源码所在位置：启动后添加一个命名此 harness checkout 的提示词段。该路径从启动器的真实路径解析，因此在 PATH 符号链接和任意 cwd 下仍然有效，使自指的 `cordis` 工具集可以读取并修改它；
 - 应用 `~/.dsh` 中的个人覆盖（参见 [app-boot 的个人配置](../../packages/ui/app-boot/README.md#personal-config)）：`config.yaml` 修补已启动的树，而那里的 `.env` 是凭据 provider 自己的存储（绝不会被提升进环境，因此密钥始终可轮换）。环境优先级为环境中已有的值 > 项目 `.env`。
 - 当 `DSH_HOME` 下不存在不可变确认标记时，通过已挂载的 TUI overlay 服务呈现[版本化首次运行欢迎页](../../.agents/notes/implemented/feature/2026-07-30-versioned-tui-first-run-welcome.md)；只有 Enter 会创建该版本的标记，Escape、资源释放或进程退出仍保留展示资格。官方 DeepSeek 图标、响应式终端栅格图、所有 locale 共用的中文文案和通知版本均由静态本地文件持有；overlay 不会写入会话事件或模型上下文。
 - 注册裸 `/compact`：agent 空闲时，即使未达到自动压力，也会摘要有效的较早历史；该命令拒绝参数，并只在独立替换标记对持久化后报告成功。压缩（compaction）期间提交的提示词保留其队列身份，并在该检查点之后启动；注入的上下文仍保持可见。
 
-`dsh experimental-meta` 是以本 harness checkout 为 workspace 的同一个 TUI，因此开发 dsh 自身无需 `cd`。它在环境确定之后才 chdir 到 checkout 根目录（从启动器的真实路径解析，与源码路径提示词段所指的根目录相同），因此环境优先级不变，而会话 cwd 与 HMR 监视根目录会一并移动。Experimental meta 始终创建新会话，不接受默认界面的任何选项；恢复已持久化会话应使用普通的 `dsh --resume <id>`。
+`dsh meta` 是以本 harness checkout 为 workspace 的同一个 TUI，因此开发 dsh 自身无需 `cd`。它在环境确定之后才 chdir 到 checkout 根目录（从启动器的真实路径解析，与源码路径提示词段所指的根目录相同），因此环境优先级不变，而会话 cwd 与 HMR 监视根目录会一并移动。Meta 始终创建新会话，不接受默认界面的任何选项；恢复已持久化会话应使用普通的 `dsh --resume <id>`。
 
-`dsh experimental-upgrade` 是默认 TUI 界面之上的引导式全新会话入口：它在调用目录中创建一个全新会话，并以内置 `dsh-upgrade` skill 播种其首轮，效果等同于用户手动键入 `/skill:<name>`。启动器将 skill 名称提供到启动上下文（[`INITIAL_SKILL_KEY`](../../packages/ui/tui/README.md)），TUI 在聊天就绪后自动调用它。该命令不接受任何选项——`--config`、`-p`、`--resume` 都会明确报错——且仅在首次启动时播种，因此之后 `dsh --resume <id>` 恢复该会话时是普通 TUI 会话，不会重复注入。
+`dsh upgrade` 是默认 TUI 界面之上的引导式全新会话入口：它在调用目录中创建一个全新会话，并以内置 `dsh-upgrade` skill 播种其首轮，效果等同于用户手动键入 `/skill:<name>`。启动器将 skill 名称提供到启动上下文（[`INITIAL_SKILL_KEY`](../../packages/ui/tui/README.md)），TUI 在聊天就绪后自动调用它。该命令除实验性门槛外不接受任何选项——`--config`、`-p`、`--resume` 都会明确报错——且仅在首次启动时播种，因此之后 `dsh --resume <id>` 恢复该会话时是普通 TUI 会话，不会重复注入。
 
 `dsh --dump-config` 和 `dsh web --dump-config` 把合成后的配置树——已交付的基础配置、界面覆盖层，以及 `--config` 或个人覆盖层，恰好是该界面启动时组装的那些层——以 YAML 打印到 stdout 后退出，不启动任何东西；`--dump-default-config` 止步于界面覆盖层，因此对两份输出做 diff 就能精确看出用户层改了什么。每段连续的行之前都有一条 `# ==` 注释，标明该段来自哪个文件以及被哪些层修补过（例如 `# == base.cordis.yml, patched by tui.cordis.yml`），因此输出既展示来源，又仍是一份可加载的文档。合成通过 include 自己的补丁算法和 YAML 方言（`@cordisjs/plugin-include` 的 `applyEntryPatches`/`entryListSchema`）完成，因此 dump 不可能与实际启动漂移；`!!js` 表达式原样打印、不求值，目标行不存在的补丁会连同其所在层报到 stderr，与 Loader 启动时的警告一致。由启动器持有的启动上下文值（会话身份、CLI 标志补丁）是每次调用的事实，位于配置树之外，不会出现。dump 标志会拒绝仅用于启动的标志（`-p`、`--resume`、`--config-replace`）而不是静默忽略它们，`--dump-default-config` 不接受 `--config`。
 

apps/cli/src/args.ts

@@ -3,7 +3,9 @@
  * parsed and routed to a mode. `bin.ts` switches on the returned discriminant
  * and dynamic-imports that mode's module. One program: the default (no
  * subcommand) is the TUI/headless surface with option-only flags;
- * `experimental-meta` and `web` are real subcommands. Commander owns
+ * `meta`, `upgrade`, and `web` are real subcommands; the experimental ones
+ * (`meta`, `upgrade`) run only under the `--experimental` flag or
+ * `DSH_EXPERIMENTAL=1`. Commander owns
  * `--help`/`--version` and parse
  * errors — it prints and exits at the point of failure (a domain failure routes through
  * `command.error`), so this returns only a resolved mode.
@@ -46,16 +48,17 @@ interface HeadlessInvocation {
   prompt: string
 }
 
-/** Interactive fresh TUI over this harness checkout; accepts no default-surface options. */
+/** Interactive fresh TUI over this harness checkout; accepts no default-surface options, only the experimental gate. */
 interface MetaInvocation {
   mode: 'meta'
 }
 
 /**
- * Guided fresh-session entry: `dsh experimental-upgrade` seeds the first turn
+ * Guided fresh-session entry: `dsh upgrade` seeds the first turn
  * with the `dsh-upgrade` skill. It always mints a
- * fresh session in the invoking directory and takes no options — `--resume`,
- * `--config`, and `-p` are rejected as mistyped, so there is nothing to carry.
+ * fresh session in the invoking directory and takes no options beyond the
+ * experimental gate — `--resume`, `--config`, and `-p` are rejected as
+ * mistyped, so there is nothing to carry.
  */
 interface SkillSessionInvocation {
   mode: 'upgrade'
@@ -154,9 +157,11 @@ function resolveWeb(options: WebOptions): WebInvocation {
  * TUI/headless surface; `web` is a subcommand.
  * @param argv - the arguments after the node binary and script (`process.argv.slice(2)`).
  * @param version - the version string `--version` prints; read from this app's package.json.
+ * @param experimentalEnv - whether the environment opts into experimental
+ * subcommands (`DSH_EXPERIMENTAL=1`); the caller reads the process boundary.
  * @returns the resolved invocation (only reached on a valid, non-help invocation).
  */
-export function parseDshArgs(argv: readonly string[], version: string): DshInvocation {
+export function parseDshArgs(argv: readonly string[], version: string, experimentalEnv: boolean): DshInvocation {
   let resolved: DshInvocation | undefined
   const program = new Command()
     .name('dsh')
@@ -248,16 +253,27 @@ Examples:
     }
   }
 
+  // `meta` and `upgrade` are experimental: each runs only under its own
+  // `--experimental` flag or an environment-wide `DSH_EXPERIMENTAL=1` opt-in,
+  // and fails loud otherwise so the gate is never silently skipped.
+  const requireExperimental = (command: string, flag: boolean | undefined): void => {
+    if (flag !== true && !experimentalEnv) {
+      program.error(`error: ${command} is experimental; pass --experimental or set DSH_EXPERIMENTAL=1`)
+    }
+  }
+
   // Registration order is the rendered help order, so daily use comes first
-  // and the harness-development surfaces (`web --dev`, `experimental-meta`)
-  // come last. `experimental-upgrade` is a guided fresh-session entry: it
-  // takes no options and always mints a fresh session, so nothing is left to
-  // carry.
+  // and the harness-development surfaces (`web --dev`, `meta`)
+  // come last. `upgrade` is a guided fresh-session entry: beyond the
+  // experimental gate it takes no options and always mints a fresh session,
+  // so nothing is left to carry.
   program
-    .command('experimental-upgrade')
-    .description('update this dsh installation to the latest version')
-    .action(() => {
-      rejectParentOptions('experimental-upgrade')
+    .command('upgrade')
+    .description('update this dsh installation to the latest version (experimental)')
+    .option('--experimental', 'acknowledge this subcommand is experimental')
+    .action((options: { experimental?: boolean }) => {
+      rejectParentOptions('upgrade')
+      requireExperimental('upgrade', options.experimental)
       resolved = { mode: 'upgrade' }
     })
 
@@ -285,10 +301,12 @@ Examples:
     })
 
   program
-    .command('experimental-meta')
-    .description('work on the dsh source that runs this command, from any directory')
-    .action(() => {
-      rejectParentOptions('experimental-meta')
+    .command('meta')
+    .description('work on the dsh source that runs this command, from any directory (experimental)')
+    .option('--experimental', 'acknowledge this subcommand is experimental')
+    .action((options: { experimental?: boolean }) => {
+      rejectParentOptions('meta')
+      requireExperimental('meta', options.experimental)
       resolved = { mode: 'meta' }
     })
 

apps/cli/src/bin.ts

@@ -25,7 +25,8 @@ function readVersion(): string {
 }
 
 loadEnv('dsh')
-const invocation = parseDshArgs(process.argv.slice(2), readVersion())
+// The env opt-in is read at the process boundary; `1` is the documented value.
+const invocation = parseDshArgs(process.argv.slice(2), readVersion(), process.env.DSH_EXPERIMENTAL === '1')
 
 switch (invocation.mode) {
   case 'web': {

apps/cli/src/tui.ts

@@ -8,8 +8,8 @@
  * from it, so `dsh` acts on whatever project it is launched in. Session storage
  * is the exception — it lives under the Harness home so `/resume` reaches every
  * workspace, and an in-place resume enters the selected session's own directory.
- * `dsh experimental-meta` is the one exception — it makes this harness
- * checkout the workspace. `dsh experimental-upgrade` is a fresh session whose
+ * `dsh meta` is the one exception — it makes this harness
+ * checkout the workspace. `dsh upgrade` is a fresh session whose
  * first turn auto-invokes a bundled skill. After boot, the agent's system
  * prompt is told the path to this harness checkout so it can find its own
  * source.
@@ -71,7 +71,7 @@ const SESSION_QUERY_DB = `session-query-${String(process.pid)}-${randomUUID()}.d
 // The harness checkout root: three hops up from apps/cli/{src,lib}, resolved
 // from this bin's location so it holds however `dsh` is launched (a PATH
 // symlink, an arbitrary cwd). The agent is told where its own source lives.
-/** The harness checkout used as the `dsh experimental-meta` workspace and source prompt path. */
+/** The harness checkout used as the `dsh meta` workspace and source prompt path. */
 export const SOURCE_ROOT = fileURLToPath(new URL('../../..', import.meta.url))
 
 /* v8 ignore start -- composition over the unit-tested dsh-app-boot helpers;
@@ -88,9 +88,9 @@ export const SOURCE_ROOT = fileURLToPath(new URL('../../..', import.meta.url))
  * {@link CONFIGURED_AGENT_IDENTITIES_KEY}, so no config key selects the session
  * and an overlay replacing the agent row cannot drop it.
  * @param workspace - a directory to make the workspace instead of the invoking
- * one, or `undefined` to keep the cwd. Only `dsh experimental-meta` passes it.
+ * one, or `undefined` to keep the cwd. Only `dsh meta` passes it.
  * @param initialSkill - a bundled skill to auto-invoke as a fresh session's
- * first turn, or `undefined`. Set only by `dsh experimental-upgrade` and
+ * first turn, or `undefined`. Set only by `dsh upgrade` and
  * ignored on a resume, so it never re-fires; reaches the app through
  * {@link INITIAL_SKILL_KEY}.
  * @param configReplace - a config path to boot as the ENTIRE tree, bypassing the
@@ -140,7 +140,7 @@ export async function runTui(
   const entry = process.argv[1]
   const execve = process.execve?.bind(process)
   const app: { current?: Context } = {}
-  // Resume always enters the default surface because experimental-meta rejects
+  // Resume always enters the default surface because meta rejects
   // parent options, including `--resume`. The resumed session already persists
   // its cwd.
   const resumeArgs = (sessionId: string): string[] => [

apps/cli/tests/args.spec.ts

@@ -1,18 +1,18 @@
 import { afterEach, describe, expect, it, vi } from 'vitest'
 import { parseDshArgs } from '../src/args.ts'
 
-const parse = (argv: string[]) => parseDshArgs(argv, '1.2.3')
+const parse = (argv: string[], experimentalEnv = false) => parseDshArgs(argv, '1.2.3', experimentalEnv)
 
 /**
  * `parseDshArgs` calls `process.exit` for `--help`/`--version`/errors and lets
  * Commander print to the real streams; capture the exit code and mute output.
  */
-function exitCode(argv: string[]): number {
+function exitCode(argv: string[], experimentalEnv = false): number {
   const exit = vi.spyOn(process, 'exit').mockImplementation(() => { throw new Error('exit') })
   vi.spyOn(process.stdout, 'write').mockReturnValue(true)
   vi.spyOn(process.stderr, 'write').mockReturnValue(true)
   try {
-    parse(argv)
+    parse(argv, experimentalEnv)
     throw new Error(`expected ${JSON.stringify(argv)} to exit`)
   } catch {
     return exit.mock.calls.at(-1)?.[0] as number
@@ -30,7 +30,9 @@ describe('parseDshArgs', () => {
     expect(parse(['--config-replace', 'tree.yml'])).toEqual({ mode: 'tui', configReplace: 'tree.yml' })
     expect(parse(['--resume', 'sess', '--config', 'app.yml'])).toEqual({ mode: 'tui', config: 'app.yml', resume: 'sess' })
     expect(parse(['-p', 'do the thing'])).toEqual({ mode: 'headless', prompt: 'do the thing' })
-    expect(parse(['experimental-meta'])).toEqual({ mode: 'meta' })
+    // Experimental subcommands run under the per-invocation flag or the env opt-in.
+    expect(parse(['meta', '--experimental'])).toEqual({ mode: 'meta' })
+    expect(parse(['meta'], true)).toEqual({ mode: 'meta' })
     // Bare `web` carries no host/port: the shipped Web overlay owns the default.
     expect(parse(['web'])).toEqual({ mode: 'web', dev: false })
     expect(parse(['web', '--config', 'web.yml'])).toEqual({ mode: 'web', dev: false, config: 'web.yml' })
@@ -39,7 +41,8 @@ describe('parseDshArgs', () => {
     expect(parse(['web', '--host', '0.0.0.0', '--port', '8080', '--dev', '--workspace-root', '/w']))
       .toEqual({ mode: 'web', host: '0.0.0.0', port: 8080, dev: true, workspaceRoot: '/w' })
     // Guided fresh-session entries carry nothing: bare mode discriminant only.
-    expect(parse(['experimental-upgrade'])).toEqual({ mode: 'upgrade' })
+    expect(parse(['upgrade', '--experimental'])).toEqual({ mode: 'upgrade' })
+    expect(parse(['upgrade'], true)).toEqual({ mode: 'upgrade' })
     // --trusted-host is variadic and repeatable; authorities pass through unvalidated.
     expect(parse(['web', '--trusted-host', 'harness.internal:3080', 'lab.internal', '--trusted-host', '10.0.0.9']))
       .toEqual({ mode: 'web', dev: false, trustedHosts: ['harness.internal:3080', 'lab.internal', '10.0.0.9'] })
@@ -64,8 +67,8 @@ describe('parseDshArgs', () => {
     expect(exitCode(['web', '--dump-config', '--dump-default-config'])).toBe(1)
     expect(exitCode(['web', '--dump-default-config', '--config', 'w.yml'])).toBe(1)
     // A leaked dump flag on a subcommand that has none is a mistyped invocation.
-    expect(exitCode(['experimental-meta', '--dump-config'])).toBe(1)
-    expect(exitCode(['experimental-upgrade', '--dump-config'])).toBe(1)
+    expect(exitCode(['meta', '--experimental', '--dump-config'])).toBe(1)
+    expect(exitCode(['upgrade', '--experimental', '--dump-config'])).toBe(1)
   })
 
   it('exits nonzero instead of silently starting fresh or dropping inputs', () => {
@@ -88,20 +91,32 @@ describe('parseDshArgs', () => {
     expect(exitCode(['--config-replace', 'tree.yml', 'web'])).toBe(1)
     // Same rule for each subcommand that shares no option with the default
     // surface, so a leaked flag is a typo, not something to ignore.
-    // `experimental-meta` fixes its own config tree and always starts fresh,
+    // `meta` fixes its own config tree and always starts fresh,
     // so every default-surface option is rejected.
-    expect(exitCode(['experimental-meta', '--resume', 's'])).toBe(1)
-    expect(exitCode(['experimental-meta', '--config', 'c.yml'])).toBe(1)
-    expect(exitCode(['experimental-meta', '--config-replace', 'tree.yml'])).toBe(1)
-    expect(exitCode(['experimental-meta', '-p', 'task'])).toBe(1)
-    // `experimental-upgrade` takes no options: any leaked default-surface flag
-    // is a mistyped invocation, not a silently-dropped input.
-    expect(exitCode(['experimental-upgrade', '--resume', 's'])).toBe(1)
-    expect(exitCode(['experimental-upgrade', '--config', 'c.yml'])).toBe(1)
-    expect(exitCode(['-p', 'task', 'experimental-upgrade'])).toBe(1)
+    expect(exitCode(['meta', '--experimental', '--resume', 's'])).toBe(1)
+    expect(exitCode(['meta', '--experimental', '--config', 'c.yml'])).toBe(1)
+    expect(exitCode(['meta', '--experimental', '--config-replace', 'tree.yml'])).toBe(1)
+    expect(exitCode(['meta', '--experimental', '-p', 'task'])).toBe(1)
+    // `upgrade` takes no options beyond the gate: any leaked default-surface
+    // flag is a mistyped invocation, not a silently-dropped input.
+    expect(exitCode(['upgrade', '--experimental', '--resume', 's'])).toBe(1)
+    expect(exitCode(['upgrade', '--experimental', '--config', 'c.yml'])).toBe(1)
+    expect(exitCode(['-p', 'task', 'upgrade', '--experimental'])).toBe(1)
     // The pre-release command names have no compatibility aliases.
+    expect(exitCode(['experimental-meta'])).toBe(1)
+    expect(exitCode(['experimental-upgrade'])).toBe(1)
+  })
+
+  it('gates experimental subcommands behind --experimental or the env opt-in', () => {
+    // Bare `meta`/`upgrade` without either opt-in must fail loud, not run.
     expect(exitCode(['meta'])).toBe(1)
     expect(exitCode(['upgrade'])).toBe(1)
+    // A leaked default-surface flag stays a typo even when the gate is passed
+    // by the environment alone.
+    expect(exitCode(['meta', '--resume', 's'], true)).toBe(1)
+    // The flag and the env opt-in may coexist.
+    expect(parse(['meta', '--experimental'], true)).toEqual({ mode: 'meta' })
+    expect(parse(['upgrade', '--experimental'], true)).toEqual({ mode: 'upgrade' })
   })
 
   it('exits 0 for --help (disclosing web) and --version', () => {

docs/config-catalog.md

@@ -2010,7 +2010,7 @@ export interface Config extends TuiConfig {
   /**
    * Skill name auto-invoked as this session's first user turn, exactly as if
    * the user typed `/skill:<name>`. Set only by a launcher for a fresh
-   * skill-guided session (`dsh migrate`/`dsh experimental-upgrade`); absent
+   * skill-guided session (`dsh migrate`/`dsh upgrade`); absent
    * leaves the first turn to the user.
    */
   initialSkill?: string

packages/ui/tui/README.i18n.yaml

@@ -2,5 +2,5 @@
 # side as of the last confirmed-consistent state. Both languages carry equal authority;
 # after editing either side, bring the other along and re-record with:
 #   pnpm run verify-translation-pairing --write packages/ui/tui/README.md
-README.md: 20ad471faa707cce0e6f0ce4df2289a900f09b93
-README.zh.md: a7d918ba3239d3e6feaa2fb43181e4bcf33e1d89
+README.md: c81cac891403e5294c4456ce4d4048ecd74666ce
+README.zh.md: 01055619f4df460284564f0a1816de366d809e01

packages/ui/tui/README.md

@@ -40,7 +40,7 @@ Selection repeats those checks and requires the current agent to be idle before
 
 The exit line is launcher-owned, not configurable. A launcher provides `TUI_GOODBYE_MESSAGE_KEY` on the boot context — for the shipped `dsh`, the command that resumes this session — and exiting prints it verbatim after the terminal is released; absent, exiting prints nothing. Only the launcher knows how it was invoked, so only it can name a command that works. The TUI escapes terminal controls before rendering and never executes the text. A launcher that also supplies `MAIN_SESSION_ID_KEY` fixes which session the mounted app binds to, so resume survives any config-level patch.
 
-A launcher can seed a fresh session's first turn by providing `INITIAL_SKILL_KEY` (the skill name) on the boot context; the TUI auto-invokes it exactly as a typed `/skill:<name>`, once the chat is live. The shipped `dsh migrate`/`dsh experimental-upgrade` set it and only for a fresh session, so a resumed session never re-invokes the skill; an unknown name is reported as a notice.
+A launcher can seed a fresh session's first turn by providing `INITIAL_SKILL_KEY` (the skill name) on the boot context; the TUI auto-invokes it exactly as a typed `/skill:<name>`, once the chat is live. The shipped `dsh migrate`/`dsh upgrade` set it and only for a fresh session, so a resumed session never re-invokes the skill; an unknown name is reported as a notice.
 
 ## Config
 

packages/ui/tui/README.zh.md

@@ -40,7 +40,7 @@ Footer 将会话报告的用量汇总为 `↑<uncached input> ↓<output>`；任
 
 退出时打印的行由启动器拥有，不可通过配置指定。启动器在启动上下文上提供 `TUI_GOODBYE_MESSAGE_KEY`（对于随附的 `dsh`，即恢复本会话的命令），释放终端后退出会原样打印它；未提供时退出不打印任何内容。只有启动器知道自己是如何被调用的，因此只有它能给出可用的命令。TUI 在渲染前会转义终端控制字符，且绝不执行该文本。若启动器同时提供 `MAIN_SESSION_ID_KEY`，则会固定已挂载应用绑定的会话，因此恢复功能不受配置层修补影响。
 
-启动器可通过在启动上下文上提供 `INITIAL_SKILL_KEY`（skill 名称）来播种全新会话的首轮；聊天就绪后，TUI 会像用户手动键入 `/skill:<name>` 一样自动调用它。随附的 `dsh migrate`/`dsh experimental-upgrade` 会设置该键，且仅对全新会话设置，因此恢复的会话绝不会重复调用该 skill；未知名称会以通知形式报告。
+启动器可通过在启动上下文上提供 `INITIAL_SKILL_KEY`（skill 名称）来播种全新会话的首轮；聊天就绪后，TUI 会像用户手动键入 `/skill:<name>` 一样自动调用它。随附的 `dsh migrate`/`dsh upgrade` 会设置该键，且仅对全新会话设置，因此恢复的会话绝不会重复调用该 skill；未知名称会以通知形式报告。
 
 ## 配置
 

packages/ui/tui/src/config.ts

@@ -122,7 +122,7 @@ export interface Config extends TuiConfig {
   /**
    * Skill name auto-invoked as this session's first user turn, exactly as if
    * the user typed `/skill:<name>`. Set only by a launcher for a fresh
-   * skill-guided session (`dsh migrate`/`dsh experimental-upgrade`); absent
+   * skill-guided session (`dsh migrate`/`dsh upgrade`); absent
    * leaves the first turn to the user.
    */
   initialSkill?: string

packages/ui/tui/src/index.ts

@@ -227,7 +227,7 @@ export const TUI_GOODBYE_MESSAGE_KEY = 'tuiGoodbyeMessage'
 /**
  * Context key a launcher sets before any Loader entry mounts
  * (`ctx.provide(INITIAL_SKILL_KEY, name)`) to seed a fresh session's first user
- * turn with `/skill:<name>` — the `dsh migrate`/`dsh experimental-upgrade`
+ * turn with `/skill:<name>` — the `dsh migrate`/`dsh upgrade`
  * guided-session entry. The launcher sets it only when minting a fresh session,
  * so it never re-fires on a resumed one. Absent leaves the first turn to the user.
  */
@@ -1690,7 +1690,7 @@ export function createTuiChat(
   })
   startBannerReveal()
 
-  // A launcher-seeded first turn (`dsh migrate`/`dsh experimental-upgrade`):
+  // A launcher-seeded first turn (`dsh migrate`/`dsh upgrade`):
   // invoke the named skill exactly as a typed `/skill:<name>` would, once the
   // chat is live and the agent is idle. The launcher sets this only for a fresh
   // session, so there is no prior turn to collide with; invokeSkill reports an