fix(install): build workspace artifacts before web

README.i18n.yaml

@@ -2,5 +2,5 @@
 # side as of the last confirmed-consistent state. Both languages carry equal authority;
 # after editing either side, bring the other along and re-record with:
 #   pnpm run verify-translation-pairing --write README.md
-README.md: f5367578570a7b4ec7bad13be3b801ac7870de6c
-README.zh.md: b9f593857d2a65b5df61983a640022be605ee93b
+README.md: e297ff32c4086df0fcc17310dabbebfaae2691ca
+README.zh.md: 5995acdf8d1c5a9aab5dcae39f3ab1e3c8b0a679

README.md

@@ -22,7 +22,7 @@ Install `dsh` with one command:
 curl -fsSL https://raw.githubusercontent.com/deepseek-harness/deepseek-harness/master/scripts/install.sh | sh
 ```
 
-The installer requires `git` and Node `^22.19 || >=24`, offers to install `pnpm` when it is missing, prompts for a DeepSeek API key, then lets you launch the Web UI or TUI. Choosing Web UI builds its frontend first.
+The installer requires `git` and Node `^22.19 || >=24`, offers to install `pnpm` when it is missing, prompts for a DeepSeek API key, then lets you launch the Web UI or TUI. Choosing Web UI builds the required repository artifacts first.
 
 The installer keeps every checkout under `~/.dsh/source`: the master clone at `~/.dsh/source/master` and each install's staging checkout as a git worktree `~/.dsh/source/staging-<timestamp>`. The stable symlink `~/.dsh/source/current` points at the active staging worktree, and `dsh` in `~/.local/bin` links to `current/bin/dsh`, so an upgrade repoints one symlink and the `dsh` on PATH never moves. Re-running the command adds a fresh staging worktree from an updated master and repoints `current` at it. See [`scripts/install.sh`](scripts/install.sh) for alternate install locations and other options.
 
@@ -30,10 +30,10 @@ The installer keeps every checkout under `~/.dsh/source`: the master clone at `~
 
 ### Web UI
 
-For the recommended local interface, choose Web UI when the installer finishes. To start it later, or after updating the active checkout, build the frontend and run:
+For the recommended local interface, choose Web UI when the installer finishes. To start it later, or after updating the active checkout, build the repository and run:
 
 ```sh
-(cd ~/.dsh/source/current && pnpm --filter @deepseek-ai/dsh-frontend run build)
+(cd ~/.dsh/source/current && pnpm run build)
 dsh web
 ```
 

README.zh.md

@@ -22,7 +22,7 @@ DeepSeek Harness（`dsh`）是一款基于 DeepSeek Harness SDK 构建的开源
 curl -fsSL https://raw.githubusercontent.com/deepseek-harness/deepseek-harness/master/scripts/install.sh | sh
 ```
 
-安装器要求系统已安装 `git` 和 Node `^22.19 || >=24`，缺少 `pnpm` 时可代为安装，并会提示输入 DeepSeek API 密钥，随后让你选择启动 Web UI 或 TUI。选择 Web UI 时，安装器会先构建其前端。
+安装器要求系统已安装 `git` 和 Node `^22.19 || >=24`，缺少 `pnpm` 时可代为安装，并会提示输入 DeepSeek API 密钥，随后让你选择启动 Web UI 或 TUI。选择 Web UI 时，安装器会先构建所需的仓库产物。
 
 安装器会把所有检出都放在 `~/.dsh/source` 下：master 克隆位于 `~/.dsh/source/master`，每次安装的 staging 检出是一个 git worktree `~/.dsh/source/staging-<时间戳>`。稳定符号链接 `~/.dsh/source/current` 指向当前生效的 staging worktree，`~/.local/bin` 中的 `dsh` 链接到 `current/bin/dsh`，因此升级只需重指一个符号链接，PATH 上的 `dsh` 从不移动。再次运行该命令会基于更新后的 master 新增一个 staging worktree，并把 `current` 重指到它。其他安装位置和选项见 [`scripts/install.sh`](scripts/install.sh)。
 
@@ -30,10 +30,10 @@ curl -fsSL https://raw.githubusercontent.com/deepseek-harness/deepseek-harness/m
 
 ### Web UI
 
-推荐在本地使用 Web UI；安装结束时，选择 Web UI 即可。以后需要启动时，或更新当前生效的检出后，请构建前端并运行：
+推荐在本地使用 Web UI；安装结束时，选择 Web UI 即可。以后需要启动时，或更新当前生效的检出后，请构建仓库并运行：
 
 ```sh
-(cd ~/.dsh/source/current && pnpm --filter @deepseek-ai/dsh-frontend run build)
+(cd ~/.dsh/source/current && pnpm run build)
 dsh web
 ```
 

apps/cli/tests/install-script.spec.ts

@@ -127,7 +127,7 @@ describe.runIf(process.platform !== 'win32')('one-line installer interface choic
     ])
 
     expect(output).toContain('launching Web UI')
-    expect(readFileSync(fixture.pnpmLog, 'utf8')).toBe('install\n--filter @deepseek-ai/dsh-frontend run build\n')
+    expect(readFileSync(fixture.pnpmLog, 'utf8')).toBe('install\nrun build\n')
     expect(readFileSync(fixture.launchLog, 'utf8')).toBe('web\n')
   })
 

scripts/install.sh

@@ -10,11 +10,11 @@
 # `pnpm install`, points the stable `~/.dsh/source/current` symlink
 # at that staging worktree and symlinks `dsh` onto PATH at `current/bin/dsh`,
 # records your API credentials in the Harness home (`~/.dsh`) dsh reads at boot,
-# and lets you launch the Web UI or TUI. The Web choice builds the frontend
-# artifact first; the TUI runs directly from TypeScript source through the repo's
-# own tsx. Keeping every checkout under ~/.dsh/source keeps successive upgrades
-# in one place instead of scattered sibling clones, and lets staging worktrees
-# share the master clone's object store. The PATH symlink resolves through
+# and lets you launch the Web UI or TUI. The Web choice builds the repository
+# artifacts first; the TUI runs directly from TypeScript source through the
+# repo's own tsx. Keeping every checkout under ~/.dsh/source keeps successive
+# upgrades in one place instead of scattered sibling clones, and lets staging
+# worktrees share the master clone's object store. The PATH symlink resolves through
 # `current`, so an upgrade repoints one stable symlink instead of relinking PATH:
 # the `dsh` on PATH never moves and can never dangle.
 #
@@ -353,8 +353,8 @@ if [ "$HAS_TTY" = 1 ]; then
     LAUNCH_INTERFACE=$(ask "Choose an interface [1/2]:" 1)
     case "$LAUNCH_INTERFACE" in
       1|web|Web|WEB)
-        step "Building Web UI"
-        ( cd "$DSH_STAGING" && pnpm --filter @deepseek-ai/dsh-frontend run build )
+        step "Building DeepSeek Harness for Web UI"
+        ( cd "$DSH_STAGING" && pnpm run build )
         info "launching Web UI — run 'dsh web' anytime to start again"
         exec "$DSH_BIN_DIR/dsh" web </dev/tty
         ;;
@@ -369,7 +369,7 @@ if [ "$HAS_TTY" = 1 ]; then
   done
 else
   info "install complete. Build and start the Web UI with:"
-  printf '    (cd %s && pnpm --filter @deepseek-ai/dsh-frontend run build)\n' "$DSH_STAGING"
+  printf '    (cd %s && pnpm run build)\n' "$DSH_STAGING"
   printf '    %s web\n' "$DSH_BIN_DIR/dsh"
   info "or start the TUI with:"
   printf '    %s\n' "$DSH_BIN_DIR/dsh"