chore: 初始化 OpenSpec 工作流

.agents/skills/.openspec-target

@@ -0,0 +1 @@
+codex

.agents/skills/openspec-apply-change/SKILL.md

@@ -0,0 +1,185 @@
+---
+name: openspec-apply-change
+description: Implement tasks from an OpenSpec change. Use when the user wants to start implementing, continue implementation, or work through tasks.
+allowed-tools: Bash(openspec:*)
+license: MIT
+compatibility: Requires openspec CLI.
+metadata:
+  author: openspec
+  version: "1.0"
+  generatedBy: "1.8.0"
+---
+
+Implement tasks from an OpenSpec change.
+
+**Store selection:** If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run `openspec store list --json` to discover registered store ids, then pass `--store <id>` on the commands that read or write specs and changes (`new change`, `status`, `instructions`, `list`, `show`, `validate`, `archive`, `doctor`, `context`, `view`). Once selected, treat `--store <id>` as sticky for the rest of the workflow. Every unscoped example of those commands below is shorthand: before running it, append the flag. For example, run `openspec status --change "<name>" --json --store "<id>"`, not the unscoped form shown below. Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local `openspec/` root.
+
+**Input**: Optionally specify a change name (e.g., `$openspec-apply-change (Codex) or /openspec-apply-change (other agents) add-auth`). If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.
+
+**Steps**
+
+1. **Select the change**
+
+   If a name is provided, use it. Otherwise:
+   - Infer from conversation context if the user mentioned a change
+   - Auto-select if only one active change exists
+   - If ambiguous, run `openspec list --json` to get available changes and ask the user to select one
+
+   Always announce: "Using change: <name>" and how to override (e.g., `$openspec-apply-change (Codex) or /openspec-apply-change (other agents) <other>`).
+
+2. **Check status to understand the schema**
+   ```bash
+   openspec status --change "<name>" --json
+   ```
+   Parse the JSON to understand:
+   - `schemaName`: The workflow being used (e.g., "spec-driven")
+   - `planningHome`, `changeRoot`, and `actionContext`: planning scope and edit constraints
+   - Which artifact contains the tasks (typically "tasks" for spec-driven, check status for others)
+
+3. **Get apply instructions**
+
+   ```bash
+   openspec instructions apply --change "<name>" --json
+   ```
+
+   This returns:
+   - `contextFiles`: artifact ID -> array of concrete file paths (varies by schema - could be proposal/specs/design/tasks or spec/tests/implementation/docs)
+   - Progress (total, complete, remaining)
+   - Task list with status
+   - Dynamic instruction based on current state
+   - Optional `context`: current required project instruction input from the selected root
+   - Optional `operationGuidance`: current advisory guidance for apply
+
+   **Handle states:**
+   - If `state: "blocked"` (missing artifacts): show message, suggest using `$openspec-continue-change (Codex) or /openspec-continue-change (other agents)` (if it is not installed, run `openspec status --change "<name>" --json` to see the next artifact and `openspec instructions <artifact-id> --change "<name>" --json` for how to create it)
+   - If `state: "all_done"`: congratulate, suggest archive
+   - Otherwise: proceed to implementation
+
+   Treat `context` as a required prompt-level input. Read and consider it, and
+   apply relevant project facts, conventions, and constraints while implementing.
+   Treat `operationGuidance` as optional additive advice. Read and consider every
+   entry, and follow entries that are applicable and compatible with the built-in
+   workflow.
+
+   Keep both fields separate from CLI-returned state, missing artifacts, tasks,
+   progress, `contextFiles`, and the built-in `instruction`. They are not
+   evidence of task completion, do not replace the built-in instruction, and do
+   not permit bypassing a blocked state. If context conflicts with the built-in
+   instruction, an explicit user choice, or a CLI-controlled value, report the
+   conflict and preserve the controlling value. If guidance is inapplicable or
+   conflicts with those controlling inputs, do not follow it and explain why.
+   These are prompt-level behavior contracts, not enforceable checks.
+
+4. **Read context files**
+
+   Read every file path listed under `contextFiles` from the apply instructions output.
+   The files depend on the schema being used:
+   - **spec-driven**: proposal, specs, design, tasks
+   - Other schemas: follow the contextFiles from CLI output
+
+   Do not copy `context` or `operationGuidance` verbatim into implementation
+   files or planning artifacts unless the user separately asks for that content.
+
+5. **Show current progress**
+
+   Display:
+   - Schema being used
+   - Progress: "N/M tasks complete"
+   - Remaining tasks overview
+   - Dynamic instruction from CLI
+
+6. **Implement tasks (loop until done or blocked)**
+
+   For each pending task:
+   - Show which task is being worked on
+   - Make the code changes required
+   - Keep changes minimal and focused
+   - Mark task complete in the tasks file: `- [ ]` → `- [x]`
+   - Continue to next task
+
+   **Pause if:**
+   - Task is unclear → ask for clarification
+   - Implementation reveals a design issue → suggest updating artifacts
+   - Error or blocker encountered → report and wait for guidance
+   - User interrupts
+
+7. **On completion or pause, show status**
+
+   Display:
+   - Tasks completed this session
+   - Overall progress: "N/M tasks complete"
+   - If all done: suggest archive
+   - If paused: explain why and wait for guidance
+
+**Output During Implementation**
+
+```
+## Implementing: <change-name> (schema: <schema-name>)
+
+Working on task 3/7: <task description>
+[...implementation happening...]
+✓ Task complete
+
+Working on task 4/7: <task description>
+[...implementation happening...]
+✓ Task complete
+```
+
+**Output On Completion**
+
+```
+## Implementation Complete
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Progress:** 7/7 tasks complete ✓
+
+### Completed This Session
+- [x] Task 1
+- [x] Task 2
+...
+
+All tasks complete! You can archive this change with `$openspec-archive-change (Codex) or /openspec-archive-change (other agents)`.
+```
+
+**Output On Pause (Issue Encountered)**
+
+```
+## Implementation Paused
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Progress:** 4/7 tasks complete
+
+### Issue Encountered
+<description of the issue>
+
+**Options:**
+1. <option 1>
+2. <option 2>
+3. Other approach
+
+What would you like to do?
+```
+
+**Guardrails**
+- Keep going through tasks until done or blocked
+- Always read context files before starting (from the apply instructions output)
+- If task is ambiguous, pause and ask before implementing
+- If implementation reveals issues, pause and suggest artifact updates
+- Keep code changes minimal and scoped to each task
+- Update task checkbox immediately after completing each task
+- Pause on errors, blockers, or unclear requirements - don't guess
+- Use contextFiles from CLI output, don't assume specific file names
+- Do not use context or operation guidance as proof that a task is complete
+- Apply relevant project context; report conflicts with controlling workflow inputs
+- Consider every guidance entry; explain any inapplicable or conflicting advice
+- Do not copy runtime context or operation guidance into implementation files or planning artifacts
+- Preserve CLI-controlled blocked/ready/all-done behavior and completion criteria
+
+**Fluid Workflow Integration**
+
+This skill supports the "actions on a change" model:
+
+- **Can be invoked anytime**: Before all artifacts are done (if tasks exist), after partial implementation, interleaved with other actions
+- **Allows artifact updates**: If implementation reveals design issues, suggest updating artifacts - not phase-locked, work fluidly

.agents/skills/openspec-archive-change/SKILL.md

@@ -0,0 +1,182 @@
+---
+name: openspec-archive-change
+description: Archive a completed change in the experimental workflow. Use when the user wants to finalize and archive a change after implementation is complete.
+allowed-tools: Bash(openspec:*)
+license: MIT
+compatibility: Requires openspec CLI.
+metadata:
+  author: openspec
+  version: "1.0"
+  generatedBy: "1.8.0"
+---
+
+Archive a completed change in the experimental workflow.
+
+**Store selection:** If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run `openspec store list --json` to discover registered store ids, then pass `--store <id>` on the commands that read or write specs and changes (`new change`, `status`, `instructions`, `list`, `show`, `validate`, `archive`, `doctor`, `context`, `view`). Once selected, treat `--store <id>` as sticky for the rest of the workflow. Every unscoped example of those commands below is shorthand: before running it, append the flag. For example, run `openspec status --change "<name>" --json --store "<id>"`, not the unscoped form shown below. Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local `openspec/` root.
+
+`<capability-path>` is the spec directory relative to `specs/` (for example, `user-auth` or `identity/user-auth`). Preserve the full path from each delta spec when resolving its main spec.
+
+**Input**: Optionally specify a change name. If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.
+
+**Steps**
+
+1. **Select the change**
+
+   If a name is provided, use it. Otherwise:
+   - Infer from conversation context if the user mentioned a change
+   - Auto-select if only one active change exists
+   - If ambiguous, run `openspec list --json` to get available changes and ask the user to select one
+
+   When prompting, show only active changes (not already archived).
+   Include the schema used for each change if available.
+
+   Always announce: "Using change: <name>" and how to override (e.g., `$openspec-archive-change (Codex) or /openspec-archive-change (other agents) <other>`).
+
+   **Load current archive inputs before the existing archive checks:**
+
+   After resolving the selected change and planning root, run:
+   ```bash
+   openspec instructions archive --change "<name>" --json
+   ```
+   Keep the same selected-root flags on this command. This lookup is advisory and
+   optional: it only supplies extra prompt inputs, so it must never block archiving.
+   If it exits non-zero or returns invalid JSON — for example on an older CLI that
+   does not support this command yet — continue the archive workflow with no
+   context and no operation guidance. Do not report an error and do not stop.
+
+   A successful response may omit both optional fields. Treat `context` as a
+   required prompt-level input: read and consider it, and apply relevant project
+   facts, conventions, and constraints. Treat `operationGuidance` as optional
+   additive advice: read and consider every entry, and follow entries that are
+   applicable and compatible with the built-in archive workflow.
+
+   Keep both fields separate from built-in steps, explicit user choices, resolved
+   paths, CLI checks, and command contracts. If context conflicts with one of those
+   controlling inputs, report the conflict and preserve the controlling value. If
+   guidance is inapplicable or conflicts with a controlling input, do not follow it
+   and explain why. Do not infer replacement paths, skipped prompts, or flags from
+   either field, and do not copy their text verbatim into specs, change artifacts,
+   or archive summaries unless the user separately asks for it. These are
+   prompt-level behavior contracts, not enforceable checks.
+
+2. **Check artifact completion status**
+
+   Run `openspec status --change "<name>" --json` to check artifact completion.
+
+   Parse the JSON to understand:
+   - `schemaName`: The workflow being used
+   - `planningHome`, `changeRoot`, `artifactPaths`, and `actionContext`: path and scope context
+   - `artifacts`: List of artifacts with their status (`done`, `skipped`, or other)
+
+   **If any artifacts are neither `done` nor `skipped`** (skipped artifacts satisfy the requirement - the change declares skip_specs):
+   - Display warning listing incomplete artifacts
+   - Ask the user to confirm they want to proceed
+   - Proceed if user confirms
+
+3. **Check task completion status**
+
+   Read the tasks file (typically `tasks.md`) to check for incomplete tasks.
+
+   Count tasks marked with `- [ ]` (incomplete) vs `- [x]` (complete).
+
+   **If incomplete tasks found:**
+   - Display warning showing count of incomplete tasks
+   - Ask the user to confirm they want to proceed
+   - Proceed if user confirms
+
+   **If no tasks file exists:** Proceed without task-related warning.
+
+4. **Assess delta spec sync state**
+
+   Use `artifactPaths.specs.existingOutputPaths` from status JSON as the only
+   delta-spec source. If the `specs` entry is missing or
+   `existingOutputPaths` is empty, proceed without a sync prompt and do not infer
+   delta specs from other artifacts.
+
+   **If delta specs exist:**
+   - Compare each delta spec with its corresponding main spec at `<planningHome.root>/openspec/specs/<capability-path>/spec.md` (use the store-aware `planningHome.root` from step 2, not a hardcoded repo path)
+   - Determine what changes would be applied (adds, modifications, removals, renames)
+   - Show a combined summary before prompting
+
+   **Prompt options:**
+   - If changes needed: "Sync now (recommended)", "Archive without syncing"
+   - If already synced: "Archive now", "Sync anyway", "Cancel"
+
+   Route on the answer:
+   - "Cancel" — stop, do not archive
+   - "Archive without syncing" or "Archive now" — proceed to archive
+   - "Sync now" or "Sync anyway" — sync, then verify (below)
+   - Anything else — ask again rather than archiving
+
+   Before a selected sync writes any main spec, run
+   `openspec instructions specs --change "<name>" --json` once with the same
+   selected-root flags. Require a zero exit status and valid artifact-instruction
+   JSON. If the lookup fails or returns invalid JSON, report the error and stop
+   before writing any main spec or moving the change. A valid response with omitted
+   `rules` is the no-rules case. Apply returned `rules` only to the content and
+   form of main specs produced by this merge; do not use them as archive guidance,
+   change CLI behavior, or copy the rule text into any output file.
+
+   Then run the `openspec-sync-specs` workflow inline (agent-driven intelligent merge) for change '<name>', passing the delta spec analysis and the fetched specs-rule snapshot from above, and wait for it to finish. The inline sync must reuse that snapshot without fetching `specs` instructions again. Do not delegate it to a background task — step 5 would move `changeRoot` out from under a sync that is still reading it, leaving the change archived and the main specs never updated. If your agent can only run it by delegation, delegate synchronously and wait for the result.
+
+   Then re-run the comparison from the top of this step against every capability that has a delta spec in `artifactPaths.specs.existingOutputPaths` — not only the ones the sync reports it touched. A successful sync leaves nothing left to apply, so each capability must now read as already synced:
+   - ADDED requirements present
+   - MODIFIED requirements carrying the scenario and description changes named in the delta, with their other scenarios intact
+   - REMOVED requirements gone — and where this sync retired a capability (removed its last requirement, leaving `## Requirements` empty), its main spec deleted rather than left empty; a spec the sync deliberately kept and reported is also a match
+   - RENAMED requirements present under the new name and absent under the old one
+
+   If the sync failed, or any capability does not match, report what differs and stop — do not archive. Nothing has moved and `changeRoot` is intact, so the user can fix the mismatch or re-run the sync and start the archive again.
+
+5. **Perform the archive**
+
+   Create an `archive` directory under `planningHome.changesDir` if it doesn't exist:
+   ```bash
+   mkdir -p "<planningHome.changesDir>/archive"
+   ```
+
+   Generate the target name: use the change name as-is when it already starts with a `YYYY-MM-DD-` prefix; otherwise prepend the current date as `YYYY-MM-DD-<change-name>`. Never stack a second date (same rule as `openspec archive`).
+
+   **Check if target already exists:**
+   - If yes: Fail with error, suggest renaming existing archive or using different date
+   - If no: Move `changeRoot` to the archive directory
+
+   ```bash
+   mv "<changeRoot>" "<planningHome.changesDir>/archive/<target-name>"
+   ```
+
+6. **Display summary**
+
+   Show archive completion summary including:
+   - Change name
+   - Schema that was used
+   - Archive location
+   - Whether specs were synced (if applicable)
+   - Note about any warnings (incomplete artifacts/tasks)
+
+**Output On Success**
+
+```markdown
+## Archive Complete
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Archived to:** the archive path derived from `planningHome.changesDir`/<target-name>/
+**Specs:** <"✓ Synced to main specs" only if the step 4 verification passed; otherwise "No delta specs" or "Sync skipped">
+
+<"All artifacts complete. All tasks complete." — or, if archived with warnings, list them instead (e.g. "Archived with 2 incomplete tasks")>
+```
+
+**Guardrails**
+- Announce the selected change; prompt for selection when it is ambiguous
+- Use artifact graph (openspec status --json) for completion checking
+- Don't block archive on warnings - just inform and confirm
+- Preserve .openspec.yaml when moving to archive (it moves with the directory)
+- Show clear summary of what happened
+- If sync is requested, run the `openspec-sync-specs` workflow inline (agent-driven)
+- Never archive while a spec sync is still in flight — run the sync inline and verify the main specs before moving `changeRoot`
+- If delta specs exist, always run the sync assessment and show the combined summary before prompting
+- Apply relevant runtime context and report conflicts; operation guidance remains advisory
+- Consider every guidance entry and explain any inapplicable or conflicting advice
+- Existing CLI checks, resolved paths, prompts, and command contracts are unchanged
+- Artifact rules constrain only the specs being written and are never operation guidance
+- Never copy runtime context, operation guidance, or artifact-rule text verbatim into output files

.agents/skills/openspec-explore/SKILL.md

@@ -0,0 +1,308 @@
+---
+name: openspec-explore
+description: Enter explore mode - a thinking partner for exploring ideas, investigating problems, and clarifying requirements. Use when the user wants to think through something before or during a change.
+allowed-tools: Bash(openspec:*)
+license: MIT
+compatibility: Requires openspec CLI.
+metadata:
+  author: openspec
+  version: "1.0"
+  generatedBy: "1.8.0"
+---
+
+Enter explore mode. Think deeply. Visualize freely. Follow the conversation wherever it goes.
+
+**IMPORTANT: Explore mode is for thinking, not implementing.** You may read files, search code, and investigate the codebase, but you must NEVER write code or implement features. If the user asks you to implement something, remind them to exit explore mode first and create a change proposal. You MAY create OpenSpec artifacts (proposals, designs, specs) if the user asks—that's capturing thinking, not implementing. For a new change, scaffold it first as described below.
+
+**This is a stance, not a workflow.** There are no fixed steps, no required sequence, no mandatory outputs. You're a thinking partner helping the user explore.
+
+**Store selection:** If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run `openspec store list --json` to discover registered store ids, then pass `--store <id>` on the commands that read or write specs and changes (`new change`, `status`, `instructions`, `list`, `show`, `validate`, `archive`, `doctor`, `context`, `view`). Once selected, treat `--store <id>` as sticky for the rest of the workflow. Every unscoped example of those commands below is shorthand: before running it, append the flag. For example, run `openspec status --change "<name>" --json --store "<id>"`, not the unscoped form shown below. Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local `openspec/` root.
+
+---
+
+## The Stance
+
+- **Curious, not prescriptive** - Ask questions that emerge naturally, don't follow a script
+- **Open threads, not interrogations** - Surface multiple interesting directions and let the user follow what resonates. Don't funnel them through a single path of questions.
+- **Visual** - Use ASCII diagrams liberally when they'd help clarify thinking
+- **Adaptive** - Follow interesting threads, pivot when new information emerges
+- **Patient** - Don't rush to conclusions, let the shape of the problem emerge
+- **Grounded** - Explore the actual codebase when relevant, don't just theorize
+
+---
+
+## What You Might Do
+
+Depending on what the user brings, you might:
+
+**Explore the problem space**
+- Ask clarifying questions that emerge from what they said
+- Challenge assumptions
+- Reframe the problem
+- Find analogies
+
+**Investigate the codebase**
+- Map existing architecture relevant to the discussion
+- Find integration points
+- Identify patterns already in use
+- Surface hidden complexity
+
+**Compare options**
+- Brainstorm multiple approaches
+- Build comparison tables
+- Sketch tradeoffs
+- Recommend a path (if asked)
+
+**Visualize**
+```
+┌─────────────────────────────────────────┐
+│     Use ASCII diagrams liberally        │
+├─────────────────────────────────────────┤
+│                                         │
+│      ┌────────┐         ┌────────┐      │
+│      │ State  │────────▶│ State  │      │
+│      │   A    │         │   B    │      │
+│      └────────┘         └────────┘      │
+│                                         │
+│   System diagrams, state machines,      │
+│   data flows, architecture sketches,    │
+│   dependency graphs, comparison tables  │
+│                                         │
+└─────────────────────────────────────────┘
+```
+
+**Surface risks and unknowns**
+- Identify what could go wrong
+- Find gaps in understanding
+- Suggest spikes or investigations
+
+---
+
+## OpenSpec Awareness
+
+You have full context of the OpenSpec system. Use it naturally, don't force it.
+
+### Check for context
+
+At the start, quickly check what exists:
+```bash
+openspec list --json
+```
+
+This tells you:
+- If there are active changes
+- Their names, schemas, and status
+- What the user might be working on
+
+Then read the project's own context from the resolved root - `<root.path>/openspec/config.yaml` (or `config.yml`). Use the `root.path` returned above, and skip this if neither file exists:
+- `context`: project background - tech stack, conventions, constraints
+- `rules`: keyed by artifact id - the entries for an artifact apply only when you write that artifact
+
+Ground your thinking in these. They are constraints for you to follow, not content to reproduce: do NOT copy them into the conversation or into any artifact you create.
+
+### When no change exists
+
+Think freely. When insights crystallize, you might offer:
+
+- "This feels solid enough to start a change. Want me to create a proposal?"
+- Or keep exploring - no pressure to formalize
+
+If the user asks you to capture the exploration as a new change, transition seamlessly into the requested capture:
+
+1. Run `openspec new change "<name>"` (with `--store <id>` when applicable) before creating any artifacts. Never create a new change directory under `openspec/changes/` by hand; the CLI scaffold creates required metadata such as `.openspec.yaml`. Keep the selected `--store <id>` on every applicable follow-up `status` and `instructions` command.
+2. Run `openspec status --change "<name>" --json` (append the confirmed `--store "<id>"` only for a registered standalone store), then process the requested artifacts in dependency order. For each requested artifact that is `ready`, run `openspec instructions "<artifact-id>" --change "<name>" --json` (append the confirmed `--store "<id>"` only for a registered standalone store). Before creating a requested artifact, evaluate any condition in its own `instruction` against the explored change; record a deliberate skip instead when the condition does not apply. If a requested artifact is blocked by a direct prerequisite the user did not request, run `openspec instructions "<prerequisite-id>" --change "<name>" --json` (append the confirmed `--store "<id>"` only for a registered standalone store) for that prerequisite whether it is `ready` or `blocked`. If its own `instruction` states a condition, evaluate that condition against the explored change and record a deliberate skip only when the condition does not apply. If the condition applies, or the prerequisite is not conditional, treat it as a normal prerequisite and ask before expanding the capture. Do not create an unrequested prerequisite unless the user approves.
+3. Follow the returned `template` and `instruction` fields. Read completed dependency files listed in `dependencies`, and apply `context` and `rules` as constraints without copying them into the artifact. If the instruction delegates creation to a specific skill or command, invoke it; otherwise write the artifact to `resolvedOutputPath`, using the instruction to choose a concrete path when it is a glob. Verify that the selected concrete output exists.
+4. After creating each artifact, re-run `openspec status --change "<name>" --json` (append the confirmed `--store "<id>"` only for a registered standalone store) and continue until every requested artifact is `done`, `skipped`, or was deliberately skipped because its own `instruction` stated a condition that did not apply. Tell the user about a deliberate conditional skip, remember it, and do not reconsider it. Dependencies are enablers, not gates: if a requested artifact is still `blocked` only because you deliberately skipped a conditional prerequisite, run `openspec instructions "<artifact-id>" --change "<name>" --json` (append the confirmed `--store "<id>"` only for a registered standalone store) despite the blocked status, then create it using step 3 only when those recorded conditional skips are its sole missing dependencies. If a requested artifact is blocked by a prerequisite the user did not ask to capture and cannot be conditionally skipped, explain that dependency and ask before expanding the capture.
+
+Capture the artifact(s) the user requested without asking them to invoke another workflow command. If they asked only to start a change, stop after scaffolding and show its status.
+
+### When a change exists
+
+If the user mentions a change or you detect one is relevant:
+
+1. **Resolve and read existing artifacts for context**
+   - Run `openspec status --change "<name>" --json`.
+   - Use `changeRoot`, `artifactPaths`, and `actionContext` from the status JSON.
+   - Read existing files from `artifactPaths.<artifact>.existingOutputPaths`.
+
+2. **Reference them naturally in conversation**
+   - "Your design mentions using Redis, but we just realized SQLite fits better..."
+   - "The proposal scopes this to premium users, but we're now thinking everyone..."
+
+3. **Offer to capture when decisions are made**
+
+   `<capability-path>` is the spec directory relative to `specs/` (for example, `user-auth` or `identity/user-auth`). Preserve an existing capability's full path and follow the project's established organization for new capabilities.
+
+    | Insight Type               | Where to Capture                    |
+    |----------------------------|-------------------------------------|
+    | New requirement discovered | `specs/<capability-path>/spec.md` |
+    | Requirement changed        | `specs/<capability-path>/spec.md` |
+    | Design decision made       | `design.md`                       |
+    | Scope changed              | `proposal.md`                     |
+    | New work identified        | `tasks.md`                        |
+    | Assumption invalidated     | Relevant artifact                   |
+
+   Example offers:
+   - "That's a design decision. Capture it in design.md?"
+   - "This is a new requirement. Add it to specs?"
+   - "This changes scope. Update the proposal?"
+
+4. **The user decides** - Offer and move on. Don't pressure. Don't auto-capture.
+
+---
+
+## What You Don't Have To Do
+
+- Follow a script
+- Ask the same questions every time
+- Produce a specific artifact
+- Reach a conclusion
+- Stay on topic if a tangent is valuable
+- Be brief (this is thinking time)
+
+---
+
+## Handling Different Entry Points
+
+**User brings a vague idea:**
+```
+User: I'm thinking about adding real-time collaboration
+
+You: Real-time collab is a big space. Let me think about this...
+
+      COLLABORATION SPECTRUM
+      ════════════════════════════════════════════
+
+      Awareness          Coordination         Sync
+          │                   │                 │
+          ▼                   ▼                 ▼
+      ┌────────┐         ┌────────┐        ┌────────┐
+      │Presence│         │Cursors │        │  CRDT  │
+      │  "3    │         │ Multi  │        │Conflict│
+      │online" │         │ select │        │  free  │
+      └────────┘         └────────┘        └────────┘
+          │                   │                 │
+       trivial            moderate           complex
+
+      Where's your head at?
+```
+
+**User brings a specific problem:**
+```
+User: The auth system is a mess
+
+You: [reads codebase]
+
+     ┌─────────────────────────────────────────────┐
+     │              CURRENT AUTH FLOW              │
+     └─────────────────────────────────────────────┘
+                        │
+          ┌─────────────┼─────────────┐
+          ▼             ▼             ▼
+     ┌─────────┐  ┌─────────┐  ┌─────────┐
+     │ Google  │  │  GitHub │  │  Email  │
+     │  OAuth  │  │  OAuth  │  │  Magic  │
+     └────┬────┘  └────┬────┘  └────┬────┘
+          │             │             │
+          └─────────────┼─────────────┘
+                        ▼
+                  ┌───────────┐
+                  │  Session  │
+                  └─────┬─────┘
+                        │
+                        ▼
+                  ┌───────────┐
+                  │   Perms   │
+                  └───────────┘
+
+     I see three tangles. Which one's burning?
+```
+
+**User is stuck mid-implementation:**
+```
+User: $openspec-explore (Codex) or /openspec-explore (other agents) add-auth-system
+      The OAuth integration is more complex than expected
+
+You: [reads change artifacts]
+
+     You're on task 4: "Implement OAuth flow"
+
+     Let me trace what's involved...
+
+     [draws diagram, explores options, suggests paths]
+
+     Want to update the design to reflect this?
+     Or add a spike task to investigate?
+```
+
+**User wants to compare options:**
+```
+User: Should we use Postgres or SQLite?
+
+You: Generic answer is boring. What's the context?
+
+User: A CLI tool that tracks local dev environments
+
+You: That changes everything.
+
+     ┌─────────────────────────────────────────────────┐
+     │          CLI TOOL DATA STORAGE                  │
+     └─────────────────────────────────────────────────┘
+
+     Key constraints:
+     • No daemon running
+     • Must work offline
+     • Single user
+
+                  SQLite          Postgres
+     Deployment   embedded ✓      needs server ✗
+     Offline      yes ✓           no ✗
+     Single file  yes ✓           no ✗
+
+     SQLite. Not even close.
+
+     Unless... is there a sync component?
+```
+
+---
+
+## Ending Discovery
+
+There's no required ending. Discovery might:
+
+- **Flow into a proposal**: "Ready to start? I can create a change proposal."
+- **Result in artifact updates**: "Updated design.md with these decisions"
+- **Just provide clarity**: User has what they need, moves on
+- **Continue later**: "We can pick this up anytime"
+
+When it feels like things are crystallizing, you might summarize:
+
+```
+## What We Figured Out
+
+**The problem**: [crystallized understanding]
+
+**The approach**: [if one emerged]
+
+**Open questions**: [if any remain]
+
+**Next steps** (if ready):
+- Create a change proposal
+- Keep exploring: just keep talking
+```
+
+But this summary is optional. Sometimes the thinking IS the value.
+
+---
+
+## Guardrails
+
+- **Don't implement** - Never write code or implement features. Creating OpenSpec artifacts is fine, writing application code is not.
+- **Don't fake understanding** - If something is unclear, dig deeper
+- **Don't rush** - Discovery is thinking time, not task time
+- **Don't force structure** - Let patterns emerge naturally
+- **Don't auto-capture** - Offer to save insights, don't just do it
+- **Don't manually scaffold changes** - Never create a new change directory under `openspec/changes/` by hand. Always use `openspec new change "<name>"` (with `--store <id>` when applicable) so required metadata such as `.openspec.yaml` is created before writing artifacts.
+- **Do visualize** - A good diagram is worth many paragraphs
+- **Do explore the codebase** - Ground discussions in reality
+- **Do question assumptions** - Including the user's and your own

.agents/skills/openspec-propose/SKILL.md

@@ -0,0 +1,149 @@
+---
+name: openspec-propose
+description: Propose a new change with all artifacts generated in one step. Use when the user wants to quickly describe what they want to build and get a complete proposal with design, specs, and tasks ready for implementation.
+allowed-tools: Bash(openspec:*)
+license: MIT
+compatibility: Requires openspec CLI.
+metadata:
+  author: openspec
+  version: "1.0"
+  generatedBy: "1.8.0"
+---
+
+Propose a new change - create the change and generate all artifacts in one step.
+
+**Planning boundary**: This workflow creates planning artifacts only. The user request that selected or triggered this workflow authorizes planning only, even if it asks to build or fix something. Do not edit project code. After the planning artifacts are complete, stop. Do not start implementation in the same response, even if the initial request asks for it. Wait for a new user request after the artifacts are presented; then start the apply workflow.
+
+I'll create a change with the artifacts your schema defines. With the default spec-driven schema that is:
+- proposal.md (what & why)
+- `specs/<capability-path>/spec.md` (what the system must do - a delta, not the main spec)
+- design.md (how)
+- tasks.md (implementation steps)
+
+`<capability-path>` is the spec directory relative to `specs/` (for example, `user-auth` or `identity/user-auth`). Preserve an existing capability's full path and follow the project's established organization for new capabilities.
+
+When the user is ready to implement, they must start the apply workflow explicitly.
+
+---
+
+**Store selection:** If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run `openspec store list --json` to discover registered store ids, then pass `--store <id>` on the commands that read or write specs and changes (`new change`, `status`, `instructions`, `list`, `show`, `validate`, `archive`, `doctor`, `context`, `view`). Once selected, treat `--store <id>` as sticky for the rest of the workflow. Every unscoped example of those commands below is shorthand: before running it, append the flag. For example, run `openspec status --change "<name>" --json --store "<id>"`, not the unscoped form shown below. Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local `openspec/` root.
+
+**Input**: The user's request should include a change name (kebab-case) OR a description of what they want to build.
+
+**Steps**
+
+1. **Understand the request and clarify material ambiguity**
+
+   If no clear input is provided, ask the user (open-ended, no preset options):
+   > "What change do you want to work on? Describe what you want to build or fix."
+
+   From their description, derive a kebab-case name (e.g., "add user authentication" → `add-user-auth`).
+
+   **IMPORTANT**: Do NOT proceed without understanding what the user wants to build.
+
+   If the request contains ambiguity that would materially affect scope, externally observable behavior, compatibility, or acceptance criteria, ask the user before creating the change. For minor details, make a reasonable assumption and record it in the planning artifacts.
+
+2. **Determine the workflow schema**
+
+   Use the configured default schema unless the user explicitly requests a different workflow.
+
+   **Use a different schema only if the user:**
+   - Explicitly requests a specific schema by name → use `--schema <schema-name>`
+   - Asks to "show workflows" or asks "what workflows" exist → resolve the authoritative root by running `openspec context --json` from the current working directory. If the user explicitly selected a registered store, use `openspec context --json --store "<store-id>"`. Then run `openspec schemas --json` with its working directory set to the returned `root.path` and let them choose. This preserves roots selected by a local `store:` pointer or the global `defaultStore`; `schemas` does not accept `--store`. If context reports only `no_openspec_root`, run `openspec schemas --json` from the current working directory instead. Do not use this fallback for invalid or unavailable stores.
+
+   Otherwise, omit `--schema` to preserve the configured default.
+
+3. **Create the change directory**
+
+   Choose one schema form below. If a registered store is selected, append `--store "<store-id>"` to that command and each later OpenSpec command shown below that accepts `--store`.
+
+   Using the configured default:
+   ```bash
+   openspec new change "<name>"
+   ```
+
+   Using an explicitly requested schema:
+   ```bash
+   openspec new change "<name>" --schema "<schema-name>"
+   ```
+   This creates a scaffolded change in the planning home resolved by the CLI with `.openspec.yaml`.
+
+4. **Get the artifact build order**
+   ```bash
+   openspec status --change "<name>" --json
+   ```
+   Parse the JSON to get:
+   - `applyRequires`: array of artifact IDs needed before implementation (e.g., `["tasks"]`)
+   - `artifacts`: list of all artifacts, each with its `status` and its `requires` edges (the artifact IDs it directly depends on)
+   - `planningHome`, `changeRoot`, `artifactPaths`, and `actionContext`: path and scope context. Use these instead of assuming repo-local paths.
+
+5. **Create every artifact in the required set**
+
+   Use a todo list to track progress through the artifacts.
+
+   Loop through artifacts in dependency order (artifacts with no pending dependencies first):
+
+   a. **For each artifact that is `ready` (dependencies satisfied)**:
+      - Get instructions:
+        ```bash
+        openspec instructions <artifact-id> --change "<name>" --json
+        ```
+      - The instructions JSON includes:
+        - `context`: Project background (constraints for you - do NOT include in output)
+        - `rules`: Artifact-specific rules (constraints for you - do NOT include in output)
+        - `template`: The structure to use for your output file
+        - `instruction`: Schema-specific guidance for this artifact type
+        - `skipped`/`warning`: present when the change declares skip_specs and this artifact must NOT be created - stop and pick another artifact
+        - `resolvedOutputPath`: Resolved path or pattern to write the artifact
+        - `dependencies`: Completed artifacts to read for context
+      - Read any completed dependency files for context - always re-read them from disk, even if you saw them earlier in the conversation (the user may have edited them)
+      - If the `instruction` field delegates creation to a specific skill or command, invoke it to produce the artifact instead of writing the file yourself, then verify the artifact file exists at `resolvedOutputPath`
+      - Otherwise create the artifact file using `template` as the structure and write it to `resolvedOutputPath`. If `resolvedOutputPath` is a glob, follow `instruction` to choose the concrete file path
+      - Apply `context` and `rules` as constraints - but do NOT copy them into the file
+      - Show brief progress: "Created <artifact-id>"
+
+   b. **Continue until every artifact in the required set exists (not just `apply.requires`)**
+      - After creating each artifact, re-run `openspec status --change "<name>" --json`
+      - The required set is `applyRequires` plus every artifact reachable from those by following the `requires` edges in `status --json` - walk them transitively (spec-driven closes over proposal, specs, design, tasks). Leave artifacts outside that set alone
+      - `status` is file-existence only, so an `applyRequires` artifact reading `done` does NOT mean its dependencies exist - writing `tasks.md` early marks `tasks` done while `specs` was never written. Use each artifact's `requires` edges, not its `status`, to build the required set: a `done` artifact still lists what it depends on
+      - An artifact already reading `status: "skipped"` is satisfied: the change declares `skip_specs` in `.openspec.yaml`, so its files must NOT exist. Never try to create one
+      - Create every artifact in the required set that is missing, then re-check - creating one can unblock others
+      - Skip one only when `status` already reports it `skipped`, or when its own `instruction` says it is conditional: run `openspec instructions <artifact-id> --change "<name>" --json` and skip only if its `instruction` field marks it optional (e.g. "create only if..."). Spec-driven's `design.md` qualifies; `specs` qualifies only via the `skipped` status above, never by your own judgment. Tell the user, and do not reconsider it
+      - Dependencies are enablers, not gates: if a required artifact is still `blocked` only because you skipped a conditional dependency, write it anyway
+      - Stop when every artifact in the required set is `done`, `skipped`, or was deliberately skipped
+
+   c. **If an artifact requires user input** (unclear context):
+      - Ask the user to clarify
+      - Then continue with creation
+
+6. **Show final status**
+   ```bash
+   openspec status --change "<name>"
+   ```
+
+**Output**
+
+After completing all artifacts, summarize:
+- Change name and location
+- List of artifacts created with brief descriptions, plus any conditional artifact you skipped and why
+- What's ready: "All artifacts needed for implementation are ready."
+- Prompt: "The artifacts are ready for review. When you are ready, run `$openspec-apply-change (Codex) or /openspec-apply-change (other agents)` or ask me to apply this change."
+
+**Artifact Creation Guidelines**
+
+- Follow the `instruction` field from `openspec instructions` for each artifact type - it is the authoritative guidance, even for familiar artifact names
+- If the `instruction` field directs you to use a specific skill or command to create the artifact, invoke it instead of writing the artifact directly
+- The schema defines what each artifact should contain - follow it
+- Read dependency artifacts for context before creating new ones
+- Use `template` as the structure for your output file - fill in its sections
+- **IMPORTANT**: `context` and `rules` are constraints for YOU, not content for the file
+  - Do NOT copy `<context>`, `<rules>`, `<project_context>` blocks into the artifact
+  - These guide what you write, but should never appear in the output
+
+**Guardrails**
+- The request that invoked this workflow authorizes planning only. Any implementation or apply instruction in that request does not carry forward. Do NOT implement the change, start the apply workflow, or edit project code during this workflow. After presenting the artifacts, stop and wait for a new user request to start the apply workflow
+- Create every artifact the apply phase transitively depends on, not just the ids listed in `apply.requires`
+- Always read dependency artifacts before creating a new one - re-read from disk, not from conversation memory (files may have changed since you last saw them)
+- Ask about ambiguities that would materially change scope, externally observable behavior, compatibility, or acceptance criteria; for minor details, make reasonable assumptions and record them
+- If a change with that name already exists, ask if user wants to continue it or create a new one
+- Verify each artifact file exists after writing before proceeding to next

.gitignore

@@ -57,7 +57,6 @@ docs/_build
 
 # vibe coding
 .claude
-openspec
 AGENTS.md
 CLAUDE.md
 

.kimi-code/skills/openspec-apply-change/SKILL.md

@@ -0,0 +1,185 @@
+---
+name: openspec-apply-change
+description: Implement tasks from an OpenSpec change. Use when the user wants to start implementing, continue implementation, or work through tasks.
+allowed-tools: Bash(openspec:*)
+license: MIT
+compatibility: Requires openspec CLI.
+metadata:
+  author: openspec
+  version: "1.0"
+  generatedBy: "1.8.0"
+---
+
+Implement tasks from an OpenSpec change.
+
+**Store selection:** If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run `openspec store list --json` to discover registered store ids, then pass `--store <id>` on the commands that read or write specs and changes (`new change`, `status`, `instructions`, `list`, `show`, `validate`, `archive`, `doctor`, `context`, `view`). Once selected, treat `--store <id>` as sticky for the rest of the workflow. Every unscoped example of those commands below is shorthand: before running it, append the flag. For example, run `openspec status --change "<name>" --json --store "<id>"`, not the unscoped form shown below. Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local `openspec/` root.
+
+**Input**: Optionally specify a change name (e.g., `/skill:openspec-apply-change add-auth`). If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.
+
+**Steps**
+
+1. **Select the change**
+
+   If a name is provided, use it. Otherwise:
+   - Infer from conversation context if the user mentioned a change
+   - Auto-select if only one active change exists
+   - If ambiguous, run `openspec list --json` to get available changes and ask the user to select one
+
+   Always announce: "Using change: <name>" and how to override (e.g., `/skill:openspec-apply-change <other>`).
+
+2. **Check status to understand the schema**
+   ```bash
+   openspec status --change "<name>" --json
+   ```
+   Parse the JSON to understand:
+   - `schemaName`: The workflow being used (e.g., "spec-driven")
+   - `planningHome`, `changeRoot`, and `actionContext`: planning scope and edit constraints
+   - Which artifact contains the tasks (typically "tasks" for spec-driven, check status for others)
+
+3. **Get apply instructions**
+
+   ```bash
+   openspec instructions apply --change "<name>" --json
+   ```
+
+   This returns:
+   - `contextFiles`: artifact ID -> array of concrete file paths (varies by schema - could be proposal/specs/design/tasks or spec/tests/implementation/docs)
+   - Progress (total, complete, remaining)
+   - Task list with status
+   - Dynamic instruction based on current state
+   - Optional `context`: current required project instruction input from the selected root
+   - Optional `operationGuidance`: current advisory guidance for apply
+
+   **Handle states:**
+   - If `state: "blocked"` (missing artifacts): show message, suggest using `/skill:openspec-continue-change` (if it is not installed, run `openspec status --change "<name>" --json` to see the next artifact and `openspec instructions <artifact-id> --change "<name>" --json` for how to create it)
+   - If `state: "all_done"`: congratulate, suggest archive
+   - Otherwise: proceed to implementation
+
+   Treat `context` as a required prompt-level input. Read and consider it, and
+   apply relevant project facts, conventions, and constraints while implementing.
+   Treat `operationGuidance` as optional additive advice. Read and consider every
+   entry, and follow entries that are applicable and compatible with the built-in
+   workflow.
+
+   Keep both fields separate from CLI-returned state, missing artifacts, tasks,
+   progress, `contextFiles`, and the built-in `instruction`. They are not
+   evidence of task completion, do not replace the built-in instruction, and do
+   not permit bypassing a blocked state. If context conflicts with the built-in
+   instruction, an explicit user choice, or a CLI-controlled value, report the
+   conflict and preserve the controlling value. If guidance is inapplicable or
+   conflicts with those controlling inputs, do not follow it and explain why.
+   These are prompt-level behavior contracts, not enforceable checks.
+
+4. **Read context files**
+
+   Read every file path listed under `contextFiles` from the apply instructions output.
+   The files depend on the schema being used:
+   - **spec-driven**: proposal, specs, design, tasks
+   - Other schemas: follow the contextFiles from CLI output
+
+   Do not copy `context` or `operationGuidance` verbatim into implementation
+   files or planning artifacts unless the user separately asks for that content.
+
+5. **Show current progress**
+
+   Display:
+   - Schema being used
+   - Progress: "N/M tasks complete"
+   - Remaining tasks overview
+   - Dynamic instruction from CLI
+
+6. **Implement tasks (loop until done or blocked)**
+
+   For each pending task:
+   - Show which task is being worked on
+   - Make the code changes required
+   - Keep changes minimal and focused
+   - Mark task complete in the tasks file: `- [ ]` → `- [x]`
+   - Continue to next task
+
+   **Pause if:**
+   - Task is unclear → ask for clarification
+   - Implementation reveals a design issue → suggest updating artifacts
+   - Error or blocker encountered → report and wait for guidance
+   - User interrupts
+
+7. **On completion or pause, show status**
+
+   Display:
+   - Tasks completed this session
+   - Overall progress: "N/M tasks complete"
+   - If all done: suggest archive
+   - If paused: explain why and wait for guidance
+
+**Output During Implementation**
+
+```
+## Implementing: <change-name> (schema: <schema-name>)
+
+Working on task 3/7: <task description>
+[...implementation happening...]
+✓ Task complete
+
+Working on task 4/7: <task description>
+[...implementation happening...]
+✓ Task complete
+```
+
+**Output On Completion**
+
+```
+## Implementation Complete
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Progress:** 7/7 tasks complete ✓
+
+### Completed This Session
+- [x] Task 1
+- [x] Task 2
+...
+
+All tasks complete! You can archive this change with `/skill:openspec-archive-change`.
+```
+
+**Output On Pause (Issue Encountered)**
+
+```
+## Implementation Paused
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Progress:** 4/7 tasks complete
+
+### Issue Encountered
+<description of the issue>
+
+**Options:**
+1. <option 1>
+2. <option 2>
+3. Other approach
+
+What would you like to do?
+```
+
+**Guardrails**
+- Keep going through tasks until done or blocked
+- Always read context files before starting (from the apply instructions output)
+- If task is ambiguous, pause and ask before implementing
+- If implementation reveals issues, pause and suggest artifact updates
+- Keep code changes minimal and scoped to each task
+- Update task checkbox immediately after completing each task
+- Pause on errors, blockers, or unclear requirements - don't guess
+- Use contextFiles from CLI output, don't assume specific file names
+- Do not use context or operation guidance as proof that a task is complete
+- Apply relevant project context; report conflicts with controlling workflow inputs
+- Consider every guidance entry; explain any inapplicable or conflicting advice
+- Do not copy runtime context or operation guidance into implementation files or planning artifacts
+- Preserve CLI-controlled blocked/ready/all-done behavior and completion criteria
+
+**Fluid Workflow Integration**
+
+This skill supports the "actions on a change" model:
+
+- **Can be invoked anytime**: Before all artifacts are done (if tasks exist), after partial implementation, interleaved with other actions
+- **Allows artifact updates**: If implementation reveals design issues, suggest updating artifacts - not phase-locked, work fluidly

.kimi-code/skills/openspec-archive-change/SKILL.md

@@ -0,0 +1,182 @@
+---
+name: openspec-archive-change
+description: Archive a completed change in the experimental workflow. Use when the user wants to finalize and archive a change after implementation is complete.
+allowed-tools: Bash(openspec:*)
+license: MIT
+compatibility: Requires openspec CLI.
+metadata:
+  author: openspec
+  version: "1.0"
+  generatedBy: "1.8.0"
+---
+
+Archive a completed change in the experimental workflow.
+
+**Store selection:** If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run `openspec store list --json` to discover registered store ids, then pass `--store <id>` on the commands that read or write specs and changes (`new change`, `status`, `instructions`, `list`, `show`, `validate`, `archive`, `doctor`, `context`, `view`). Once selected, treat `--store <id>` as sticky for the rest of the workflow. Every unscoped example of those commands below is shorthand: before running it, append the flag. For example, run `openspec status --change "<name>" --json --store "<id>"`, not the unscoped form shown below. Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local `openspec/` root.
+
+`<capability-path>` is the spec directory relative to `specs/` (for example, `user-auth` or `identity/user-auth`). Preserve the full path from each delta spec when resolving its main spec.
+
+**Input**: Optionally specify a change name. If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.
+
+**Steps**
+
+1. **Select the change**
+
+   If a name is provided, use it. Otherwise:
+   - Infer from conversation context if the user mentioned a change
+   - Auto-select if only one active change exists
+   - If ambiguous, run `openspec list --json` to get available changes and ask the user to select one
+
+   When prompting, show only active changes (not already archived).
+   Include the schema used for each change if available.
+
+   Always announce: "Using change: <name>" and how to override (e.g., `/skill:openspec-archive-change <other>`).
+
+   **Load current archive inputs before the existing archive checks:**
+
+   After resolving the selected change and planning root, run:
+   ```bash
+   openspec instructions archive --change "<name>" --json
+   ```
+   Keep the same selected-root flags on this command. This lookup is advisory and
+   optional: it only supplies extra prompt inputs, so it must never block archiving.
+   If it exits non-zero or returns invalid JSON — for example on an older CLI that
+   does not support this command yet — continue the archive workflow with no
+   context and no operation guidance. Do not report an error and do not stop.
+
+   A successful response may omit both optional fields. Treat `context` as a
+   required prompt-level input: read and consider it, and apply relevant project
+   facts, conventions, and constraints. Treat `operationGuidance` as optional
+   additive advice: read and consider every entry, and follow entries that are
+   applicable and compatible with the built-in archive workflow.
+
+   Keep both fields separate from built-in steps, explicit user choices, resolved
+   paths, CLI checks, and command contracts. If context conflicts with one of those
+   controlling inputs, report the conflict and preserve the controlling value. If
+   guidance is inapplicable or conflicts with a controlling input, do not follow it
+   and explain why. Do not infer replacement paths, skipped prompts, or flags from
+   either field, and do not copy their text verbatim into specs, change artifacts,
+   or archive summaries unless the user separately asks for it. These are
+   prompt-level behavior contracts, not enforceable checks.
+
+2. **Check artifact completion status**
+
+   Run `openspec status --change "<name>" --json` to check artifact completion.
+
+   Parse the JSON to understand:
+   - `schemaName`: The workflow being used
+   - `planningHome`, `changeRoot`, `artifactPaths`, and `actionContext`: path and scope context
+   - `artifacts`: List of artifacts with their status (`done`, `skipped`, or other)
+
+   **If any artifacts are neither `done` nor `skipped`** (skipped artifacts satisfy the requirement - the change declares skip_specs):
+   - Display warning listing incomplete artifacts
+   - Ask the user to confirm they want to proceed
+   - Proceed if user confirms
+
+3. **Check task completion status**
+
+   Read the tasks file (typically `tasks.md`) to check for incomplete tasks.
+
+   Count tasks marked with `- [ ]` (incomplete) vs `- [x]` (complete).
+
+   **If incomplete tasks found:**
+   - Display warning showing count of incomplete tasks
+   - Ask the user to confirm they want to proceed
+   - Proceed if user confirms
+
+   **If no tasks file exists:** Proceed without task-related warning.
+
+4. **Assess delta spec sync state**
+
+   Use `artifactPaths.specs.existingOutputPaths` from status JSON as the only
+   delta-spec source. If the `specs` entry is missing or
+   `existingOutputPaths` is empty, proceed without a sync prompt and do not infer
+   delta specs from other artifacts.
+
+   **If delta specs exist:**
+   - Compare each delta spec with its corresponding main spec at `<planningHome.root>/openspec/specs/<capability-path>/spec.md` (use the store-aware `planningHome.root` from step 2, not a hardcoded repo path)
+   - Determine what changes would be applied (adds, modifications, removals, renames)
+   - Show a combined summary before prompting
+
+   **Prompt options:**
+   - If changes needed: "Sync now (recommended)", "Archive without syncing"
+   - If already synced: "Archive now", "Sync anyway", "Cancel"
+
+   Route on the answer:
+   - "Cancel" — stop, do not archive
+   - "Archive without syncing" or "Archive now" — proceed to archive
+   - "Sync now" or "Sync anyway" — sync, then verify (below)
+   - Anything else — ask again rather than archiving
+
+   Before a selected sync writes any main spec, run
+   `openspec instructions specs --change "<name>" --json` once with the same
+   selected-root flags. Require a zero exit status and valid artifact-instruction
+   JSON. If the lookup fails or returns invalid JSON, report the error and stop
+   before writing any main spec or moving the change. A valid response with omitted
+   `rules` is the no-rules case. Apply returned `rules` only to the content and
+   form of main specs produced by this merge; do not use them as archive guidance,
+   change CLI behavior, or copy the rule text into any output file.
+
+   Then run the `openspec-sync-specs` workflow inline (agent-driven intelligent merge) for change '<name>', passing the delta spec analysis and the fetched specs-rule snapshot from above, and wait for it to finish. The inline sync must reuse that snapshot without fetching `specs` instructions again. Do not delegate it to a background task — step 5 would move `changeRoot` out from under a sync that is still reading it, leaving the change archived and the main specs never updated. If your agent can only run it by delegation, delegate synchronously and wait for the result.
+
+   Then re-run the comparison from the top of this step against every capability that has a delta spec in `artifactPaths.specs.existingOutputPaths` — not only the ones the sync reports it touched. A successful sync leaves nothing left to apply, so each capability must now read as already synced:
+   - ADDED requirements present
+   - MODIFIED requirements carrying the scenario and description changes named in the delta, with their other scenarios intact
+   - REMOVED requirements gone — and where this sync retired a capability (removed its last requirement, leaving `## Requirements` empty), its main spec deleted rather than left empty; a spec the sync deliberately kept and reported is also a match
+   - RENAMED requirements present under the new name and absent under the old one
+
+   If the sync failed, or any capability does not match, report what differs and stop — do not archive. Nothing has moved and `changeRoot` is intact, so the user can fix the mismatch or re-run the sync and start the archive again.
+
+5. **Perform the archive**
+
+   Create an `archive` directory under `planningHome.changesDir` if it doesn't exist:
+   ```bash
+   mkdir -p "<planningHome.changesDir>/archive"
+   ```
+
+   Generate the target name: use the change name as-is when it already starts with a `YYYY-MM-DD-` prefix; otherwise prepend the current date as `YYYY-MM-DD-<change-name>`. Never stack a second date (same rule as `openspec archive`).
+
+   **Check if target already exists:**
+   - If yes: Fail with error, suggest renaming existing archive or using different date
+   - If no: Move `changeRoot` to the archive directory
+
+   ```bash
+   mv "<changeRoot>" "<planningHome.changesDir>/archive/<target-name>"
+   ```
+
+6. **Display summary**
+
+   Show archive completion summary including:
+   - Change name
+   - Schema that was used
+   - Archive location
+   - Whether specs were synced (if applicable)
+   - Note about any warnings (incomplete artifacts/tasks)
+
+**Output On Success**
+
+```markdown
+## Archive Complete
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Archived to:** the archive path derived from `planningHome.changesDir`/<target-name>/
+**Specs:** <"✓ Synced to main specs" only if the step 4 verification passed; otherwise "No delta specs" or "Sync skipped">
+
+<"All artifacts complete. All tasks complete." — or, if archived with warnings, list them instead (e.g. "Archived with 2 incomplete tasks")>
+```
+
+**Guardrails**
+- Announce the selected change; prompt for selection when it is ambiguous
+- Use artifact graph (openspec status --json) for completion checking
+- Don't block archive on warnings - just inform and confirm
+- Preserve .openspec.yaml when moving to archive (it moves with the directory)
+- Show clear summary of what happened
+- If sync is requested, run the `openspec-sync-specs` workflow inline (agent-driven)
+- Never archive while a spec sync is still in flight — run the sync inline and verify the main specs before moving `changeRoot`
+- If delta specs exist, always run the sync assessment and show the combined summary before prompting
+- Apply relevant runtime context and report conflicts; operation guidance remains advisory
+- Consider every guidance entry and explain any inapplicable or conflicting advice
+- Existing CLI checks, resolved paths, prompts, and command contracts are unchanged
+- Artifact rules constrain only the specs being written and are never operation guidance
+- Never copy runtime context, operation guidance, or artifact-rule text verbatim into output files

.kimi-code/skills/openspec-explore/SKILL.md

@@ -0,0 +1,308 @@
+---
+name: openspec-explore
+description: Enter explore mode - a thinking partner for exploring ideas, investigating problems, and clarifying requirements. Use when the user wants to think through something before or during a change.
+allowed-tools: Bash(openspec:*)
+license: MIT
+compatibility: Requires openspec CLI.
+metadata:
+  author: openspec
+  version: "1.0"
+  generatedBy: "1.8.0"
+---
+
+Enter explore mode. Think deeply. Visualize freely. Follow the conversation wherever it goes.
+
+**IMPORTANT: Explore mode is for thinking, not implementing.** You may read files, search code, and investigate the codebase, but you must NEVER write code or implement features. If the user asks you to implement something, remind them to exit explore mode first and create a change proposal. You MAY create OpenSpec artifacts (proposals, designs, specs) if the user asks—that's capturing thinking, not implementing. For a new change, scaffold it first as described below.
+
+**This is a stance, not a workflow.** There are no fixed steps, no required sequence, no mandatory outputs. You're a thinking partner helping the user explore.
+
+**Store selection:** If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run `openspec store list --json` to discover registered store ids, then pass `--store <id>` on the commands that read or write specs and changes (`new change`, `status`, `instructions`, `list`, `show`, `validate`, `archive`, `doctor`, `context`, `view`). Once selected, treat `--store <id>` as sticky for the rest of the workflow. Every unscoped example of those commands below is shorthand: before running it, append the flag. For example, run `openspec status --change "<name>" --json --store "<id>"`, not the unscoped form shown below. Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local `openspec/` root.
+
+---
+
+## The Stance
+
+- **Curious, not prescriptive** - Ask questions that emerge naturally, don't follow a script
+- **Open threads, not interrogations** - Surface multiple interesting directions and let the user follow what resonates. Don't funnel them through a single path of questions.
+- **Visual** - Use ASCII diagrams liberally when they'd help clarify thinking
+- **Adaptive** - Follow interesting threads, pivot when new information emerges
+- **Patient** - Don't rush to conclusions, let the shape of the problem emerge
+- **Grounded** - Explore the actual codebase when relevant, don't just theorize
+
+---
+
+## What You Might Do
+
+Depending on what the user brings, you might:
+
+**Explore the problem space**
+- Ask clarifying questions that emerge from what they said
+- Challenge assumptions
+- Reframe the problem
+- Find analogies
+
+**Investigate the codebase**
+- Map existing architecture relevant to the discussion
+- Find integration points
+- Identify patterns already in use
+- Surface hidden complexity
+
+**Compare options**
+- Brainstorm multiple approaches
+- Build comparison tables
+- Sketch tradeoffs
+- Recommend a path (if asked)
+
+**Visualize**
+```
+┌─────────────────────────────────────────┐
+│     Use ASCII diagrams liberally        │
+├─────────────────────────────────────────┤
+│                                         │
+│      ┌────────┐         ┌────────┐      │
+│      │ State  │────────▶│ State  │      │
+│      │   A    │         │   B    │      │
+│      └────────┘         └────────┘      │
+│                                         │
+│   System diagrams, state machines,      │
+│   data flows, architecture sketches,    │
+│   dependency graphs, comparison tables  │
+│                                         │
+└─────────────────────────────────────────┘
+```
+
+**Surface risks and unknowns**
+- Identify what could go wrong
+- Find gaps in understanding
+- Suggest spikes or investigations
+
+---
+
+## OpenSpec Awareness
+
+You have full context of the OpenSpec system. Use it naturally, don't force it.
+
+### Check for context
+
+At the start, quickly check what exists:
+```bash
+openspec list --json
+```
+
+This tells you:
+- If there are active changes
+- Their names, schemas, and status
+- What the user might be working on
+
+Then read the project's own context from the resolved root - `<root.path>/openspec/config.yaml` (or `config.yml`). Use the `root.path` returned above, and skip this if neither file exists:
+- `context`: project background - tech stack, conventions, constraints
+- `rules`: keyed by artifact id - the entries for an artifact apply only when you write that artifact
+
+Ground your thinking in these. They are constraints for you to follow, not content to reproduce: do NOT copy them into the conversation or into any artifact you create.
+
+### When no change exists
+
+Think freely. When insights crystallize, you might offer:
+
+- "This feels solid enough to start a change. Want me to create a proposal?"
+- Or keep exploring - no pressure to formalize
+
+If the user asks you to capture the exploration as a new change, transition seamlessly into the requested capture:
+
+1. Run `openspec new change "<name>"` (with `--store <id>` when applicable) before creating any artifacts. Never create a new change directory under `openspec/changes/` by hand; the CLI scaffold creates required metadata such as `.openspec.yaml`. Keep the selected `--store <id>` on every applicable follow-up `status` and `instructions` command.
+2. Run `openspec status --change "<name>" --json` (append the confirmed `--store "<id>"` only for a registered standalone store), then process the requested artifacts in dependency order. For each requested artifact that is `ready`, run `openspec instructions "<artifact-id>" --change "<name>" --json` (append the confirmed `--store "<id>"` only for a registered standalone store). Before creating a requested artifact, evaluate any condition in its own `instruction` against the explored change; record a deliberate skip instead when the condition does not apply. If a requested artifact is blocked by a direct prerequisite the user did not request, run `openspec instructions "<prerequisite-id>" --change "<name>" --json` (append the confirmed `--store "<id>"` only for a registered standalone store) for that prerequisite whether it is `ready` or `blocked`. If its own `instruction` states a condition, evaluate that condition against the explored change and record a deliberate skip only when the condition does not apply. If the condition applies, or the prerequisite is not conditional, treat it as a normal prerequisite and ask before expanding the capture. Do not create an unrequested prerequisite unless the user approves.
+3. Follow the returned `template` and `instruction` fields. Read completed dependency files listed in `dependencies`, and apply `context` and `rules` as constraints without copying them into the artifact. If the instruction delegates creation to a specific skill or command, invoke it; otherwise write the artifact to `resolvedOutputPath`, using the instruction to choose a concrete path when it is a glob. Verify that the selected concrete output exists.
+4. After creating each artifact, re-run `openspec status --change "<name>" --json` (append the confirmed `--store "<id>"` only for a registered standalone store) and continue until every requested artifact is `done`, `skipped`, or was deliberately skipped because its own `instruction` stated a condition that did not apply. Tell the user about a deliberate conditional skip, remember it, and do not reconsider it. Dependencies are enablers, not gates: if a requested artifact is still `blocked` only because you deliberately skipped a conditional prerequisite, run `openspec instructions "<artifact-id>" --change "<name>" --json` (append the confirmed `--store "<id>"` only for a registered standalone store) despite the blocked status, then create it using step 3 only when those recorded conditional skips are its sole missing dependencies. If a requested artifact is blocked by a prerequisite the user did not ask to capture and cannot be conditionally skipped, explain that dependency and ask before expanding the capture.
+
+Capture the artifact(s) the user requested without asking them to invoke another workflow command. If they asked only to start a change, stop after scaffolding and show its status.
+
+### When a change exists
+
+If the user mentions a change or you detect one is relevant:
+
+1. **Resolve and read existing artifacts for context**
+   - Run `openspec status --change "<name>" --json`.
+   - Use `changeRoot`, `artifactPaths`, and `actionContext` from the status JSON.
+   - Read existing files from `artifactPaths.<artifact>.existingOutputPaths`.
+
+2. **Reference them naturally in conversation**
+   - "Your design mentions using Redis, but we just realized SQLite fits better..."
+   - "The proposal scopes this to premium users, but we're now thinking everyone..."
+
+3. **Offer to capture when decisions are made**
+
+   `<capability-path>` is the spec directory relative to `specs/` (for example, `user-auth` or `identity/user-auth`). Preserve an existing capability's full path and follow the project's established organization for new capabilities.
+
+    | Insight Type               | Where to Capture                    |
+    |----------------------------|-------------------------------------|
+    | New requirement discovered | `specs/<capability-path>/spec.md` |
+    | Requirement changed        | `specs/<capability-path>/spec.md` |
+    | Design decision made       | `design.md`                       |
+    | Scope changed              | `proposal.md`                     |
+    | New work identified        | `tasks.md`                        |
+    | Assumption invalidated     | Relevant artifact                   |
+
+   Example offers:
+   - "That's a design decision. Capture it in design.md?"
+   - "This is a new requirement. Add it to specs?"
+   - "This changes scope. Update the proposal?"
+
+4. **The user decides** - Offer and move on. Don't pressure. Don't auto-capture.
+
+---
+
+## What You Don't Have To Do
+
+- Follow a script
+- Ask the same questions every time
+- Produce a specific artifact
+- Reach a conclusion
+- Stay on topic if a tangent is valuable
+- Be brief (this is thinking time)
+
+---
+
+## Handling Different Entry Points
+
+**User brings a vague idea:**
+```
+User: I'm thinking about adding real-time collaboration
+
+You: Real-time collab is a big space. Let me think about this...
+
+      COLLABORATION SPECTRUM
+      ════════════════════════════════════════════
+
+      Awareness          Coordination         Sync
+          │                   │                 │
+          ▼                   ▼                 ▼
+      ┌────────┐         ┌────────┐        ┌────────┐
+      │Presence│         │Cursors │        │  CRDT  │
+      │  "3    │         │ Multi  │        │Conflict│
+      │online" │         │ select │        │  free  │
+      └────────┘         └────────┘        └────────┘
+          │                   │                 │
+       trivial            moderate           complex
+
+      Where's your head at?
+```
+
+**User brings a specific problem:**
+```
+User: The auth system is a mess
+
+You: [reads codebase]
+
+     ┌─────────────────────────────────────────────┐
+     │              CURRENT AUTH FLOW              │
+     └─────────────────────────────────────────────┘
+                        │
+          ┌─────────────┼─────────────┐
+          ▼             ▼             ▼
+     ┌─────────┐  ┌─────────┐  ┌─────────┐
+     │ Google  │  │  GitHub │  │  Email  │
+     │  OAuth  │  │  OAuth  │  │  Magic  │
+     └────┬────┘  └────┬────┘  └────┬────┘
+          │             │             │
+          └─────────────┼─────────────┘
+                        ▼
+                  ┌───────────┐
+                  │  Session  │
+                  └─────┬─────┘
+                        │
+                        ▼
+                  ┌───────────┐
+                  │   Perms   │
+                  └───────────┘
+
+     I see three tangles. Which one's burning?
+```
+
+**User is stuck mid-implementation:**
+```
+User: /skill:openspec-explore add-auth-system
+      The OAuth integration is more complex than expected
+
+You: [reads change artifacts]
+
+     You're on task 4: "Implement OAuth flow"
+
+     Let me trace what's involved...
+
+     [draws diagram, explores options, suggests paths]
+
+     Want to update the design to reflect this?
+     Or add a spike task to investigate?
+```
+
+**User wants to compare options:**
+```
+User: Should we use Postgres or SQLite?
+
+You: Generic answer is boring. What's the context?
+
+User: A CLI tool that tracks local dev environments
+
+You: That changes everything.
+
+     ┌─────────────────────────────────────────────────┐
+     │          CLI TOOL DATA STORAGE                  │
+     └─────────────────────────────────────────────────┘
+
+     Key constraints:
+     • No daemon running
+     • Must work offline
+     • Single user
+
+                  SQLite          Postgres
+     Deployment   embedded ✓      needs server ✗
+     Offline      yes ✓           no ✗
+     Single file  yes ✓           no ✗
+
+     SQLite. Not even close.
+
+     Unless... is there a sync component?
+```
+
+---
+
+## Ending Discovery
+
+There's no required ending. Discovery might:
+
+- **Flow into a proposal**: "Ready to start? I can create a change proposal."
+- **Result in artifact updates**: "Updated design.md with these decisions"
+- **Just provide clarity**: User has what they need, moves on
+- **Continue later**: "We can pick this up anytime"
+
+When it feels like things are crystallizing, you might summarize:
+
+```
+## What We Figured Out
+
+**The problem**: [crystallized understanding]
+
+**The approach**: [if one emerged]
+
+**Open questions**: [if any remain]
+
+**Next steps** (if ready):
+- Create a change proposal
+- Keep exploring: just keep talking
+```
+
+But this summary is optional. Sometimes the thinking IS the value.
+
+---
+
+## Guardrails
+
+- **Don't implement** - Never write code or implement features. Creating OpenSpec artifacts is fine, writing application code is not.
+- **Don't fake understanding** - If something is unclear, dig deeper
+- **Don't rush** - Discovery is thinking time, not task time
+- **Don't force structure** - Let patterns emerge naturally
+- **Don't auto-capture** - Offer to save insights, don't just do it
+- **Don't manually scaffold changes** - Never create a new change directory under `openspec/changes/` by hand. Always use `openspec new change "<name>"` (with `--store <id>` when applicable) so required metadata such as `.openspec.yaml` is created before writing artifacts.
+- **Do visualize** - A good diagram is worth many paragraphs
+- **Do explore the codebase** - Ground discussions in reality
+- **Do question assumptions** - Including the user's and your own

.kimi-code/skills/openspec-propose/SKILL.md

@@ -0,0 +1,149 @@
+---
+name: openspec-propose
+description: Propose a new change with all artifacts generated in one step. Use when the user wants to quickly describe what they want to build and get a complete proposal with design, specs, and tasks ready for implementation.
+allowed-tools: Bash(openspec:*)
+license: MIT
+compatibility: Requires openspec CLI.
+metadata:
+  author: openspec
+  version: "1.0"
+  generatedBy: "1.8.0"
+---
+
+Propose a new change - create the change and generate all artifacts in one step.
+
+**Planning boundary**: This workflow creates planning artifacts only. The user request that selected or triggered this workflow authorizes planning only, even if it asks to build or fix something. Do not edit project code. After the planning artifacts are complete, stop. Do not start implementation in the same response, even if the initial request asks for it. Wait for a new user request after the artifacts are presented; then start the apply workflow.
+
+I'll create a change with the artifacts your schema defines. With the default spec-driven schema that is:
+- proposal.md (what & why)
+- `specs/<capability-path>/spec.md` (what the system must do - a delta, not the main spec)
+- design.md (how)
+- tasks.md (implementation steps)
+
+`<capability-path>` is the spec directory relative to `specs/` (for example, `user-auth` or `identity/user-auth`). Preserve an existing capability's full path and follow the project's established organization for new capabilities.
+
+When the user is ready to implement, they must start the apply workflow explicitly.
+
+---
+
+**Store selection:** If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run `openspec store list --json` to discover registered store ids, then pass `--store <id>` on the commands that read or write specs and changes (`new change`, `status`, `instructions`, `list`, `show`, `validate`, `archive`, `doctor`, `context`, `view`). Once selected, treat `--store <id>` as sticky for the rest of the workflow. Every unscoped example of those commands below is shorthand: before running it, append the flag. For example, run `openspec status --change "<name>" --json --store "<id>"`, not the unscoped form shown below. Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local `openspec/` root.
+
+**Input**: The user's request should include a change name (kebab-case) OR a description of what they want to build.
+
+**Steps**
+
+1. **Understand the request and clarify material ambiguity**
+
+   If no clear input is provided, ask the user (open-ended, no preset options):
+   > "What change do you want to work on? Describe what you want to build or fix."
+
+   From their description, derive a kebab-case name (e.g., "add user authentication" → `add-user-auth`).
+
+   **IMPORTANT**: Do NOT proceed without understanding what the user wants to build.
+
+   If the request contains ambiguity that would materially affect scope, externally observable behavior, compatibility, or acceptance criteria, ask the user before creating the change. For minor details, make a reasonable assumption and record it in the planning artifacts.
+
+2. **Determine the workflow schema**
+
+   Use the configured default schema unless the user explicitly requests a different workflow.
+
+   **Use a different schema only if the user:**
+   - Explicitly requests a specific schema by name → use `--schema <schema-name>`
+   - Asks to "show workflows" or asks "what workflows" exist → resolve the authoritative root by running `openspec context --json` from the current working directory. If the user explicitly selected a registered store, use `openspec context --json --store "<store-id>"`. Then run `openspec schemas --json` with its working directory set to the returned `root.path` and let them choose. This preserves roots selected by a local `store:` pointer or the global `defaultStore`; `schemas` does not accept `--store`. If context reports only `no_openspec_root`, run `openspec schemas --json` from the current working directory instead. Do not use this fallback for invalid or unavailable stores.
+
+   Otherwise, omit `--schema` to preserve the configured default.
+
+3. **Create the change directory**
+
+   Choose one schema form below. If a registered store is selected, append `--store "<store-id>"` to that command and each later OpenSpec command shown below that accepts `--store`.
+
+   Using the configured default:
+   ```bash
+   openspec new change "<name>"
+   ```
+
+   Using an explicitly requested schema:
+   ```bash
+   openspec new change "<name>" --schema "<schema-name>"
+   ```
+   This creates a scaffolded change in the planning home resolved by the CLI with `.openspec.yaml`.
+
+4. **Get the artifact build order**
+   ```bash
+   openspec status --change "<name>" --json
+   ```
+   Parse the JSON to get:
+   - `applyRequires`: array of artifact IDs needed before implementation (e.g., `["tasks"]`)
+   - `artifacts`: list of all artifacts, each with its `status` and its `requires` edges (the artifact IDs it directly depends on)
+   - `planningHome`, `changeRoot`, `artifactPaths`, and `actionContext`: path and scope context. Use these instead of assuming repo-local paths.
+
+5. **Create every artifact in the required set**
+
+   Use a todo list to track progress through the artifacts.
+
+   Loop through artifacts in dependency order (artifacts with no pending dependencies first):
+
+   a. **For each artifact that is `ready` (dependencies satisfied)**:
+      - Get instructions:
+        ```bash
+        openspec instructions <artifact-id> --change "<name>" --json
+        ```
+      - The instructions JSON includes:
+        - `context`: Project background (constraints for you - do NOT include in output)
+        - `rules`: Artifact-specific rules (constraints for you - do NOT include in output)
+        - `template`: The structure to use for your output file
+        - `instruction`: Schema-specific guidance for this artifact type
+        - `skipped`/`warning`: present when the change declares skip_specs and this artifact must NOT be created - stop and pick another artifact
+        - `resolvedOutputPath`: Resolved path or pattern to write the artifact
+        - `dependencies`: Completed artifacts to read for context
+      - Read any completed dependency files for context - always re-read them from disk, even if you saw them earlier in the conversation (the user may have edited them)
+      - If the `instruction` field delegates creation to a specific skill or command, invoke it to produce the artifact instead of writing the file yourself, then verify the artifact file exists at `resolvedOutputPath`
+      - Otherwise create the artifact file using `template` as the structure and write it to `resolvedOutputPath`. If `resolvedOutputPath` is a glob, follow `instruction` to choose the concrete file path
+      - Apply `context` and `rules` as constraints - but do NOT copy them into the file
+      - Show brief progress: "Created <artifact-id>"
+
+   b. **Continue until every artifact in the required set exists (not just `apply.requires`)**
+      - After creating each artifact, re-run `openspec status --change "<name>" --json`
+      - The required set is `applyRequires` plus every artifact reachable from those by following the `requires` edges in `status --json` - walk them transitively (spec-driven closes over proposal, specs, design, tasks). Leave artifacts outside that set alone
+      - `status` is file-existence only, so an `applyRequires` artifact reading `done` does NOT mean its dependencies exist - writing `tasks.md` early marks `tasks` done while `specs` was never written. Use each artifact's `requires` edges, not its `status`, to build the required set: a `done` artifact still lists what it depends on
+      - An artifact already reading `status: "skipped"` is satisfied: the change declares `skip_specs` in `.openspec.yaml`, so its files must NOT exist. Never try to create one
+      - Create every artifact in the required set that is missing, then re-check - creating one can unblock others
+      - Skip one only when `status` already reports it `skipped`, or when its own `instruction` says it is conditional: run `openspec instructions <artifact-id> --change "<name>" --json` and skip only if its `instruction` field marks it optional (e.g. "create only if..."). Spec-driven's `design.md` qualifies; `specs` qualifies only via the `skipped` status above, never by your own judgment. Tell the user, and do not reconsider it
+      - Dependencies are enablers, not gates: if a required artifact is still `blocked` only because you skipped a conditional dependency, write it anyway
+      - Stop when every artifact in the required set is `done`, `skipped`, or was deliberately skipped
+
+   c. **If an artifact requires user input** (unclear context):
+      - Ask the user to clarify
+      - Then continue with creation
+
+6. **Show final status**
+   ```bash
+   openspec status --change "<name>"
+   ```
+
+**Output**
+
+After completing all artifacts, summarize:
+- Change name and location
+- List of artifacts created with brief descriptions, plus any conditional artifact you skipped and why
+- What's ready: "All artifacts needed for implementation are ready."
+- Prompt: "The artifacts are ready for review. When you are ready, run `/skill:openspec-apply-change` or ask me to apply this change."
+
+**Artifact Creation Guidelines**
+
+- Follow the `instruction` field from `openspec instructions` for each artifact type - it is the authoritative guidance, even for familiar artifact names
+- If the `instruction` field directs you to use a specific skill or command to create the artifact, invoke it instead of writing the artifact directly
+- The schema defines what each artifact should contain - follow it
+- Read dependency artifacts for context before creating new ones
+- Use `template` as the structure for your output file - fill in its sections
+- **IMPORTANT**: `context` and `rules` are constraints for YOU, not content for the file
+  - Do NOT copy `<context>`, `<rules>`, `<project_context>` blocks into the artifact
+  - These guide what you write, but should never appear in the output
+
+**Guardrails**
+- The request that invoked this workflow authorizes planning only. Any implementation or apply instruction in that request does not carry forward. Do NOT implement the change, start the apply workflow, or edit project code during this workflow. After presenting the artifacts, stop and wait for a new user request to start the apply workflow
+- Create every artifact the apply phase transitively depends on, not just the ids listed in `apply.requires`
+- Always read dependency artifacts before creating a new one - re-read from disk, not from conversation memory (files may have changed since you last saw them)
+- Ask about ambiguities that would materially change scope, externally observable behavior, compatibility, or acceptance criteria; for minor details, make reasonable assumptions and record them
+- If a change with that name already exists, ask if user wants to continue it or create a new one
+- Verify each artifact file exists after writing before proceeding to next

.zcode/commands/opsx/apply.md

@@ -0,0 +1,180 @@
+---
+name: "OPSX: Apply"
+description: "Implement tasks from an OpenSpec change (Experimental)"
+category: "Workflow"
+tags: ["workflow", "artifacts", "experimental"]
+---
+
+Implement tasks from an OpenSpec change.
+
+**Store selection:** If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run `openspec store list --json` to discover registered store ids, then pass `--store <id>` on the commands that read or write specs and changes (`new change`, `status`, `instructions`, `list`, `show`, `validate`, `archive`, `doctor`, `context`, `view`). Once selected, treat `--store <id>` as sticky for the rest of the workflow. Every unscoped example of those commands below is shorthand: before running it, append the flag. For example, run `openspec status --change "<name>" --json --store "<id>"`, not the unscoped form shown below. Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local `openspec/` root.
+
+**Input**: Optionally specify a change name (e.g., `/opsx:apply add-auth`). If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.
+
+**Steps**
+
+1. **Select the change**
+
+   If a name is provided, use it. Otherwise:
+   - Infer from conversation context if the user mentioned a change
+   - Auto-select if only one active change exists
+   - If ambiguous, run `openspec list --json` to get available changes and ask the user to select one
+
+   Always announce: "Using change: <name>" and how to override (e.g., `/opsx:apply <other>`).
+
+2. **Check status to understand the schema**
+   ```bash
+   openspec status --change "<name>" --json
+   ```
+   Parse the JSON to understand:
+   - `schemaName`: The workflow being used (e.g., "spec-driven")
+   - `planningHome`, `changeRoot`, and `actionContext`: planning scope and edit constraints
+   - Which artifact contains the tasks (typically "tasks" for spec-driven, check status for others)
+
+3. **Get apply instructions**
+
+   ```bash
+   openspec instructions apply --change "<name>" --json
+   ```
+
+   This returns:
+   - `contextFiles`: artifact ID -> array of concrete file paths (varies by schema - could be proposal/specs/design/tasks or spec/tests/implementation/docs)
+   - Progress (total, complete, remaining)
+   - Task list with status
+   - Dynamic instruction based on current state
+   - Optional `context`: current required project instruction input from the selected root
+   - Optional `operationGuidance`: current advisory guidance for apply
+
+   **Handle states:**
+   - If `state: "blocked"` (missing artifacts): show message, suggest using `/opsx:continue` (if it is not installed, run `openspec status --change "<name>" --json` to see the next artifact and `openspec instructions <artifact-id> --change "<name>" --json` for how to create it)
+   - If `state: "all_done"`: congratulate, suggest archive
+   - Otherwise: proceed to implementation
+
+   Treat `context` as a required prompt-level input. Read and consider it, and
+   apply relevant project facts, conventions, and constraints while implementing.
+   Treat `operationGuidance` as optional additive advice. Read and consider every
+   entry, and follow entries that are applicable and compatible with the built-in
+   workflow.
+
+   Keep both fields separate from CLI-returned state, missing artifacts, tasks,
+   progress, `contextFiles`, and the built-in `instruction`. They are not
+   evidence of task completion, do not replace the built-in instruction, and do
+   not permit bypassing a blocked state. If context conflicts with the built-in
+   instruction, an explicit user choice, or a CLI-controlled value, report the
+   conflict and preserve the controlling value. If guidance is inapplicable or
+   conflicts with those controlling inputs, do not follow it and explain why.
+   These are prompt-level behavior contracts, not enforceable checks.
+
+4. **Read context files**
+
+   Read every file path listed under `contextFiles` from the apply instructions output.
+   The files depend on the schema being used:
+   - **spec-driven**: proposal, specs, design, tasks
+   - Other schemas: follow the contextFiles from CLI output
+
+   Do not copy `context` or `operationGuidance` verbatim into implementation
+   files or planning artifacts unless the user separately asks for that content.
+
+5. **Show current progress**
+
+   Display:
+   - Schema being used
+   - Progress: "N/M tasks complete"
+   - Remaining tasks overview
+   - Dynamic instruction from CLI
+
+6. **Implement tasks (loop until done or blocked)**
+
+   For each pending task:
+   - Show which task is being worked on
+   - Make the code changes required
+   - Keep changes minimal and focused
+   - Mark task complete in the tasks file: `- [ ]` → `- [x]`
+   - Continue to next task
+
+   **Pause if:**
+   - Task is unclear → ask for clarification
+   - Implementation reveals a design issue → suggest updating artifacts
+   - Error or blocker encountered → report and wait for guidance
+   - User interrupts
+
+7. **On completion or pause, show status**
+
+   Display:
+   - Tasks completed this session
+   - Overall progress: "N/M tasks complete"
+   - If all done: suggest archive
+   - If paused: explain why and wait for guidance
+
+**Output During Implementation**
+
+```
+## Implementing: <change-name> (schema: <schema-name>)
+
+Working on task 3/7: <task description>
+[...implementation happening...]
+✓ Task complete
+
+Working on task 4/7: <task description>
+[...implementation happening...]
+✓ Task complete
+```
+
+**Output On Completion**
+
+```
+## Implementation Complete
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Progress:** 7/7 tasks complete ✓
+
+### Completed This Session
+- [x] Task 1
+- [x] Task 2
+...
+
+All tasks complete! You can archive this change with `/opsx:archive`.
+```
+
+**Output On Pause (Issue Encountered)**
+
+```
+## Implementation Paused
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Progress:** 4/7 tasks complete
+
+### Issue Encountered
+<description of the issue>
+
+**Options:**
+1. <option 1>
+2. <option 2>
+3. Other approach
+
+What would you like to do?
+```
+
+**Guardrails**
+- Keep going through tasks until done or blocked
+- Always read context files before starting (from the apply instructions output)
+- If task is ambiguous, pause and ask before implementing
+- If implementation reveals issues, pause and suggest artifact updates
+- Keep code changes minimal and scoped to each task
+- Update task checkbox immediately after completing each task
+- Pause on errors, blockers, or unclear requirements - don't guess
+- Use contextFiles from CLI output, don't assume specific file names
+- Do not use context or operation guidance as proof that a task is complete
+- Apply relevant project context; report conflicts with controlling workflow inputs
+- Consider every guidance entry; explain any inapplicable or conflicting advice
+- Do not copy runtime context or operation guidance into implementation files or planning artifacts
+- Preserve CLI-controlled blocked/ready/all-done behavior and completion criteria
+
+**Fluid Workflow Integration**
+
+This skill supports the "actions on a change" model:
+
+- **Can be invoked anytime**: Before all artifacts are done (if tasks exist), after partial implementation, interleaved with other actions
+- **Allows artifact updates**: If implementation reveals design issues, suggest updating artifacts - not phase-locked, work fluidly

.zcode/commands/opsx/archive.md

@@ -0,0 +1,224 @@
+---
+name: "OPSX: Archive"
+description: "Archive a completed change in the experimental workflow"
+category: "Workflow"
+tags: ["workflow", "archive", "experimental"]
+---
+
+Archive a completed change in the experimental workflow.
+
+**Store selection:** If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run `openspec store list --json` to discover registered store ids, then pass `--store <id>` on the commands that read or write specs and changes (`new change`, `status`, `instructions`, `list`, `show`, `validate`, `archive`, `doctor`, `context`, `view`). Once selected, treat `--store <id>` as sticky for the rest of the workflow. Every unscoped example of those commands below is shorthand: before running it, append the flag. For example, run `openspec status --change "<name>" --json --store "<id>"`, not the unscoped form shown below. Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local `openspec/` root.
+
+`<capability-path>` is the spec directory relative to `specs/` (for example, `user-auth` or `identity/user-auth`). Preserve the full path from each delta spec when resolving its main spec.
+
+**Input**: Optionally specify a change name after `/opsx:archive` (e.g., `/opsx:archive add-auth`). If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.
+
+**Steps**
+
+1. **Select the change**
+
+   If a name is provided, use it. Otherwise:
+   - Infer from conversation context if the user mentioned a change
+   - Auto-select if only one active change exists
+   - If ambiguous, run `openspec list --json` to get available changes and ask the user to select one
+
+   When prompting, show only active changes (not already archived).
+   Include the schema used for each change if available.
+
+   Always announce: "Using change: <name>" and how to override (e.g., `/opsx:archive <other>`).
+
+   **Load current archive inputs before the existing archive checks:**
+
+   After resolving the selected change and planning root, run:
+   ```bash
+   openspec instructions archive --change "<name>" --json
+   ```
+   Keep the same selected-root flags on this command. This lookup is advisory and
+   optional: it only supplies extra prompt inputs, so it must never block archiving.
+   If it exits non-zero or returns invalid JSON — for example on an older CLI that
+   does not support this command yet — continue the archive workflow with no
+   context and no operation guidance. Do not report an error and do not stop.
+
+   A successful response may omit both optional fields. Treat `context` as a
+   required prompt-level input: read and consider it, and apply relevant project
+   facts, conventions, and constraints. Treat `operationGuidance` as optional
+   additive advice: read and consider every entry, and follow entries that are
+   applicable and compatible with the built-in archive workflow.
+
+   Keep both fields separate from built-in steps, explicit user choices, resolved
+   paths, CLI checks, and command contracts. If context conflicts with one of those
+   controlling inputs, report the conflict and preserve the controlling value. If
+   guidance is inapplicable or conflicts with a controlling input, do not follow it
+   and explain why. Do not infer replacement paths, skipped prompts, or flags from
+   either field, and do not copy their text verbatim into specs, change artifacts,
+   or archive summaries unless the user separately asks for it. These are
+   prompt-level behavior contracts, not enforceable checks.
+
+2. **Check artifact completion status**
+
+   Run `openspec status --change "<name>" --json` to check artifact completion.
+
+   Parse the JSON to understand:
+   - `schemaName`: The workflow being used
+   - `planningHome`, `changeRoot`, `artifactPaths`, and `actionContext`: path and scope context
+   - `artifacts`: List of artifacts with their status (`done`, `skipped`, or other)
+
+   **If any artifacts are neither `done` nor `skipped`** (skipped artifacts satisfy the requirement - the change declares skip_specs):
+   - Display warning listing incomplete artifacts
+   - Prompt user for confirmation to continue
+   - Proceed if user confirms
+
+3. **Check task completion status**
+
+   Read the tasks file (typically `tasks.md`) to check for incomplete tasks.
+
+   Count tasks marked with `- [ ]` (incomplete) vs `- [x]` (complete).
+
+   **If incomplete tasks found:**
+   - Display warning showing count of incomplete tasks
+   - Prompt user for confirmation to continue
+   - Proceed if user confirms
+
+   **If no tasks file exists:** Proceed without task-related warning.
+
+4. **Assess delta spec sync state**
+
+   Use `artifactPaths.specs.existingOutputPaths` from status JSON as the only
+   delta-spec source. If the `specs` entry is missing or
+   `existingOutputPaths` is empty, proceed without a sync prompt and do not infer
+   delta specs from other artifacts.
+
+   **If delta specs exist:**
+   - Compare each delta spec with its corresponding main spec at `<planningHome.root>/openspec/specs/<capability-path>/spec.md` (use the store-aware `planningHome.root` from step 2, not a hardcoded repo path)
+   - Determine what changes would be applied (adds, modifications, removals, renames)
+   - Show a combined summary before prompting
+
+   **Prompt options:**
+   - If changes needed: "Sync now (recommended)", "Archive without syncing"
+   - If already synced: "Archive now", "Sync anyway", "Cancel"
+
+   Route on the answer:
+   - "Cancel" — stop, do not archive
+   - "Archive without syncing" or "Archive now" — proceed to archive
+   - "Sync now" or "Sync anyway" — sync, then verify (below)
+   - Anything else — ask again rather than archiving
+
+   Before a selected sync writes any main spec, run
+   `openspec instructions specs --change "<name>" --json` once with the same
+   selected-root flags. Require a zero exit status and valid artifact-instruction
+   JSON. If the lookup fails or returns invalid JSON, report the error and stop
+   before writing any main spec or moving the change. A valid response with omitted
+   `rules` is the no-rules case. Apply returned `rules` only to the content and
+   form of main specs produced by this merge; do not use them as archive guidance,
+   change CLI behavior, or copy the rule text into any output file.
+
+   Then run the `/opsx:sync` workflow inline (agent-driven intelligent merge) for change '<name>', passing the delta spec analysis and the fetched specs-rule snapshot from above, and wait for it to finish. The inline sync must reuse that snapshot without fetching `specs` instructions again. Do not delegate it to a background task — step 5 would move `changeRoot` out from under a sync that is still reading it, leaving the change archived and the main specs never updated. If your agent can only run it by delegation, delegate synchronously and wait for the result.
+
+   Then re-run the comparison from the top of this step against every capability that has a delta spec in `artifactPaths.specs.existingOutputPaths` — not only the ones the sync reports it touched. A successful sync leaves nothing left to apply, so each capability must now read as already synced:
+   - ADDED requirements present
+   - MODIFIED requirements carrying the scenario and description changes named in the delta, with their other scenarios intact
+   - REMOVED requirements gone — and where this sync retired a capability (removed its last requirement, leaving `## Requirements` empty), its main spec deleted rather than left empty; a spec the sync deliberately kept and reported is also a match
+   - RENAMED requirements present under the new name and absent under the old one
+
+   If the sync failed, or any capability does not match, report what differs and stop — do not archive. Nothing has moved and `changeRoot` is intact, so the user can fix the mismatch or re-run the sync and start the archive again.
+
+5. **Perform the archive**
+
+   Create an `archive` directory under `planningHome.changesDir` if it doesn't exist:
+   ```bash
+   mkdir -p "<planningHome.changesDir>/archive"
+   ```
+
+   Generate the target name: use the change name as-is when it already starts with a `YYYY-MM-DD-` prefix; otherwise prepend the current date as `YYYY-MM-DD-<change-name>`. Never stack a second date (same rule as `openspec archive`).
+
+   **Check if target already exists:**
+   - If yes: Fail with error, suggest renaming existing archive or using different date
+   - If no: Move `changeRoot` to the archive directory
+
+   ```bash
+   mv "<changeRoot>" "<planningHome.changesDir>/archive/<target-name>"
+   ```
+
+6. **Display summary**
+
+   Show archive completion summary including:
+   - Change name
+   - Schema that was used
+   - Archive location
+   - Spec sync status (synced / sync skipped / no delta specs)
+   - Note about any warnings (incomplete artifacts/tasks)
+
+**Output On Success**
+
+```markdown
+## Archive Complete
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Archived to:** the archive path derived from `planningHome.changesDir`/<target-name>/
+**Specs:** ✓ Synced to main specs
+
+All artifacts complete. All tasks complete.
+```
+
+**Output On Success (No Delta Specs)**
+
+```markdown
+## Archive Complete
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Archived to:** the archive path derived from `planningHome.changesDir`/<target-name>/
+**Specs:** No delta specs
+
+All artifacts complete. All tasks complete.
+```
+
+**Output On Success With Warnings**
+
+```markdown
+## Archive Complete (with warnings)
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Archived to:** the archive path derived from `planningHome.changesDir`/<target-name>/
+**Specs:** Sync skipped (user chose to skip)
+
+**Warnings:**
+- Archived with 2 incomplete artifacts
+- Archived with 3 incomplete tasks
+- Delta spec sync was skipped (user chose to skip)
+
+Review the archive if this was not intentional.
+```
+
+**Output On Error (Archive Exists)**
+
+```markdown
+## Archive Failed
+
+**Change:** <change-name>
+**Target:** the archive path derived from `planningHome.changesDir`/<target-name>/
+
+Target archive directory already exists.
+
+**Options:**
+1. Rename the existing archive
+2. Delete the existing archive if it's a duplicate
+3. Wait until a different date to archive
+```
+
+**Guardrails**
+- Announce the selected change; prompt for selection when it is ambiguous
+- Use artifact graph (openspec status --json) for completion checking
+- Don't block archive on warnings - just inform and confirm
+- Preserve .openspec.yaml when moving to archive (it moves with the directory)
+- Show clear summary of what happened
+- If sync is requested, run the `/opsx:sync` workflow inline (agent-driven)
+- Never archive while a spec sync is still in flight — run the sync inline and verify the main specs before moving `changeRoot`
+- If delta specs exist, always run the sync assessment and show the combined summary before prompting
+- Apply relevant runtime context and report conflicts; operation guidance remains advisory
+- Consider every guidance entry and explain any inapplicable or conflicting advice
+- Existing CLI checks, resolved paths, prompts, and command contracts are unchanged
+- Artifact rules constrain only the specs being written and are never operation guidance
+- Never copy runtime context, operation guidance, or artifact-rule text verbatim into output files

.zcode/commands/opsx/explore.md

@@ -0,0 +1,192 @@
+---
+name: "OPSX: Explore"
+description: "Enter explore mode - think through ideas, investigate problems, clarify requirements"
+category: "Workflow"
+tags: ["workflow", "explore", "experimental", "thinking"]
+---
+
+Enter explore mode. Think deeply. Visualize freely. Follow the conversation wherever it goes.
+
+**IMPORTANT: Explore mode is for thinking, not implementing.** You may read files, search code, and investigate the codebase, but you must NEVER write code or implement features. If the user asks you to implement something, remind them to exit explore mode first and create a change proposal. You MAY create OpenSpec artifacts (proposals, designs, specs) if the user asks—that's capturing thinking, not implementing. For a new change, scaffold it first as described below.
+
+**This is a stance, not a workflow.** There are no fixed steps, no required sequence, no mandatory outputs. You're a thinking partner helping the user explore.
+
+**Store selection:** If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run `openspec store list --json` to discover registered store ids, then pass `--store <id>` on the commands that read or write specs and changes (`new change`, `status`, `instructions`, `list`, `show`, `validate`, `archive`, `doctor`, `context`, `view`). Once selected, treat `--store <id>` as sticky for the rest of the workflow. Every unscoped example of those commands below is shorthand: before running it, append the flag. For example, run `openspec status --change "<name>" --json --store "<id>"`, not the unscoped form shown below. Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local `openspec/` root.
+
+**Input**: The argument after `/opsx:explore` is whatever the user wants to think about. Could be:
+- A vague idea: "real-time collaboration"
+- A specific problem: "the auth system is getting unwieldy"
+- A change name: "add-dark-mode" (to explore in context of that change)
+- A comparison: "postgres vs sqlite for this"
+- Nothing (just enter explore mode)
+
+---
+
+## The Stance
+
+- **Curious, not prescriptive** - Ask questions that emerge naturally, don't follow a script
+- **Open threads, not interrogations** - Surface multiple interesting directions and let the user follow what resonates. Don't funnel them through a single path of questions.
+- **Visual** - Use ASCII diagrams liberally when they'd help clarify thinking
+- **Adaptive** - Follow interesting threads, pivot when new information emerges
+- **Patient** - Don't rush to conclusions, let the shape of the problem emerge
+- **Grounded** - Explore the actual codebase when relevant, don't just theorize
+
+---
+
+## What You Might Do
+
+Depending on what the user brings, you might:
+
+**Explore the problem space**
+- Ask clarifying questions that emerge from what they said
+- Challenge assumptions
+- Reframe the problem
+- Find analogies
+
+**Investigate the codebase**
+- Map existing architecture relevant to the discussion
+- Find integration points
+- Identify patterns already in use
+- Surface hidden complexity
+
+**Compare options**
+- Brainstorm multiple approaches
+- Build comparison tables
+- Sketch tradeoffs
+- Recommend a path (if asked)
+
+**Visualize**
+```
+┌─────────────────────────────────────────┐
+│     Use ASCII diagrams liberally        │
+├─────────────────────────────────────────┤
+│                                         │
+│      ┌────────┐         ┌────────┐      │
+│      │ State  │────────▶│ State  │      │
+│      │   A    │         │   B    │      │
+│      └────────┘         └────────┘      │
+│                                         │
+│   System diagrams, state machines,      │
+│   data flows, architecture sketches,    │
+│   dependency graphs, comparison tables  │
+│                                         │
+└─────────────────────────────────────────┘
+```
+
+**Surface risks and unknowns**
+- Identify what could go wrong
+- Find gaps in understanding
+- Suggest spikes or investigations
+
+---
+
+## OpenSpec Awareness
+
+You have full context of the OpenSpec system. Use it naturally, don't force it.
+
+### Check for context
+
+At the start, quickly check what exists:
+```bash
+openspec list --json
+```
+
+This tells you:
+- If there are active changes
+- Their names, schemas, and status
+- What the user might be working on
+
+Then read the project's own context from the resolved root - `<root.path>/openspec/config.yaml` (or `config.yml`). Use the `root.path` returned above, and skip this if neither file exists:
+- `context`: project background - tech stack, conventions, constraints
+- `rules`: keyed by artifact id - the entries for an artifact apply only when you write that artifact
+
+Ground your thinking in these. They are constraints for you to follow, not content to reproduce: do NOT copy them into the conversation or into any artifact you create.
+
+If the user mentioned a specific change name, read its artifacts for context.
+
+### When no change exists
+
+Think freely. When insights crystallize, you might offer:
+
+- "This feels solid enough to start a change. Want me to create a proposal?"
+- Or keep exploring - no pressure to formalize
+
+If the user asks you to capture the exploration as a new change, transition seamlessly into the requested capture:
+
+1. Run `openspec new change "<name>"` (with `--store <id>` when applicable) before creating any artifacts. Never create a new change directory under `openspec/changes/` by hand; the CLI scaffold creates required metadata such as `.openspec.yaml`. Keep the selected `--store <id>` on every applicable follow-up `status` and `instructions` command.
+2. Run `openspec status --change "<name>" --json` (append the confirmed `--store "<id>"` only for a registered standalone store), then process the requested artifacts in dependency order. For each requested artifact that is `ready`, run `openspec instructions "<artifact-id>" --change "<name>" --json` (append the confirmed `--store "<id>"` only for a registered standalone store). Before creating a requested artifact, evaluate any condition in its own `instruction` against the explored change; record a deliberate skip instead when the condition does not apply. If a requested artifact is blocked by a direct prerequisite the user did not request, run `openspec instructions "<prerequisite-id>" --change "<name>" --json` (append the confirmed `--store "<id>"` only for a registered standalone store) for that prerequisite whether it is `ready` or `blocked`. If its own `instruction` states a condition, evaluate that condition against the explored change and record a deliberate skip only when the condition does not apply. If the condition applies, or the prerequisite is not conditional, treat it as a normal prerequisite and ask before expanding the capture. Do not create an unrequested prerequisite unless the user approves.
+3. Follow the returned `template` and `instruction` fields. Read completed dependency files listed in `dependencies`, and apply `context` and `rules` as constraints without copying them into the artifact. If the instruction delegates creation to a specific skill or command, invoke it; otherwise write the artifact to `resolvedOutputPath`, using the instruction to choose a concrete path when it is a glob. Verify that the selected concrete output exists.
+4. After creating each artifact, re-run `openspec status --change "<name>" --json` (append the confirmed `--store "<id>"` only for a registered standalone store) and continue until every requested artifact is `done`, `skipped`, or was deliberately skipped because its own `instruction` stated a condition that did not apply. Tell the user about a deliberate conditional skip, remember it, and do not reconsider it. Dependencies are enablers, not gates: if a requested artifact is still `blocked` only because you deliberately skipped a conditional prerequisite, run `openspec instructions "<artifact-id>" --change "<name>" --json` (append the confirmed `--store "<id>"` only for a registered standalone store) despite the blocked status, then create it using step 3 only when those recorded conditional skips are its sole missing dependencies. If a requested artifact is blocked by a prerequisite the user did not ask to capture and cannot be conditionally skipped, explain that dependency and ask before expanding the capture.
+
+Capture the artifact(s) the user requested without asking them to invoke another workflow command. If they asked only to start a change, stop after scaffolding and show its status.
+
+### When a change exists
+
+If the user mentions a change or you detect one is relevant:
+
+1. **Resolve and read existing artifacts for context**
+   - Run `openspec status --change "<name>" --json`.
+   - Use `changeRoot`, `artifactPaths`, and `actionContext` from the status JSON.
+   - Read existing files from `artifactPaths.<artifact>.existingOutputPaths`.
+
+2. **Reference them naturally in conversation**
+   - "Your design mentions using Redis, but we just realized SQLite fits better..."
+   - "The proposal scopes this to premium users, but we're now thinking everyone..."
+
+3. **Offer to capture when decisions are made**
+
+   `<capability-path>` is the spec directory relative to `specs/` (for example, `user-auth` or `identity/user-auth`). Preserve an existing capability's full path and follow the project's established organization for new capabilities.
+
+    | Insight Type               | Where to Capture                    |
+    |----------------------------|-------------------------------------|
+    | New requirement discovered | `specs/<capability-path>/spec.md` |
+    | Requirement changed        | `specs/<capability-path>/spec.md` |
+    | Design decision made       | `design.md`                       |
+    | Scope changed              | `proposal.md`                     |
+    | New work identified        | `tasks.md`                        |
+    | Assumption invalidated     | Relevant artifact                   |
+
+   Example offers:
+   - "That's a design decision. Capture it in design.md?"
+   - "This is a new requirement. Add it to specs?"
+   - "This changes scope. Update the proposal?"
+
+4. **The user decides** - Offer and move on. Don't pressure. Don't auto-capture.
+
+---
+
+## What You Don't Have To Do
+
+- Follow a script
+- Ask the same questions every time
+- Produce a specific artifact
+- Reach a conclusion
+- Stay on topic if a tangent is valuable
+- Be brief (this is thinking time)
+
+---
+
+## Ending Discovery
+
+There's no required ending. Discovery might:
+
+- **Flow into a proposal**: "Ready to start? I can create a change proposal."
+- **Result in artifact updates**: "Updated design.md with these decisions"
+- **Just provide clarity**: User has what they need, moves on
+- **Continue later**: "We can pick this up anytime"
+
+When things crystallize, you might offer a summary - but it's optional. Sometimes the thinking IS the value.
+
+---
+
+## Guardrails
+
+- **Don't implement** - Never write code or implement features. Creating OpenSpec artifacts is fine, writing application code is not.
+- **Don't fake understanding** - If something is unclear, dig deeper
+- **Don't rush** - Discovery is thinking time, not task time
+- **Don't force structure** - Let patterns emerge naturally
+- **Don't auto-capture** - Offer to save insights, don't just do it
+- **Don't manually scaffold changes** - Never create a new change directory under `openspec/changes/` by hand. Always use `openspec new change "<name>"` (with `--store <id>` when applicable) so required metadata such as `.openspec.yaml` is created before writing artifacts.
+- **Do visualize** - A good diagram is worth many paragraphs
+- **Do explore the codebase** - Ground discussions in reality
+- **Do question assumptions** - Including the user's and your own

.zcode/commands/opsx/propose.md

@@ -0,0 +1,144 @@
+---
+name: "OPSX: Propose"
+description: "Propose a new change - create it and generate all artifacts in one step"
+category: "Workflow"
+tags: ["workflow", "artifacts", "experimental"]
+---
+
+Propose a new change - create the change and generate all artifacts in one step.
+
+**Planning boundary**: This workflow creates planning artifacts only. The user request that selected or triggered this workflow authorizes planning only, even if it asks to build or fix something. Do not edit project code. After the planning artifacts are complete, stop. Do not start implementation in the same response, even if the initial request asks for it. Wait for a new user request after the artifacts are presented; then start the apply workflow.
+
+I'll create a change with the artifacts your schema defines. With the default spec-driven schema that is:
+- proposal.md (what & why)
+- `specs/<capability-path>/spec.md` (what the system must do - a delta, not the main spec)
+- design.md (how)
+- tasks.md (implementation steps)
+
+`<capability-path>` is the spec directory relative to `specs/` (for example, `user-auth` or `identity/user-auth`). Preserve an existing capability's full path and follow the project's established organization for new capabilities.
+
+When the user is ready to implement, they must start the apply workflow explicitly.
+
+---
+
+**Store selection:** If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run `openspec store list --json` to discover registered store ids, then pass `--store <id>` on the commands that read or write specs and changes (`new change`, `status`, `instructions`, `list`, `show`, `validate`, `archive`, `doctor`, `context`, `view`). Once selected, treat `--store <id>` as sticky for the rest of the workflow. Every unscoped example of those commands below is shorthand: before running it, append the flag. For example, run `openspec status --change "<name>" --json --store "<id>"`, not the unscoped form shown below. Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local `openspec/` root.
+
+**Input**: The argument after `/opsx:propose` is the change name (kebab-case), OR a description of what the user wants to build.
+
+**Steps**
+
+1. **Understand the request and clarify material ambiguity**
+
+   If no input is provided, ask the user (open-ended, no preset options):
+   > "What change do you want to work on? Describe what you want to build or fix."
+
+   From their description, derive a kebab-case name (e.g., "add user authentication" → `add-user-auth`).
+
+   **IMPORTANT**: Do NOT proceed without understanding what the user wants to build.
+
+   If the request contains ambiguity that would materially affect scope, externally observable behavior, compatibility, or acceptance criteria, ask the user before creating the change. For minor details, make a reasonable assumption and record it in the planning artifacts.
+
+2. **Determine the workflow schema**
+
+   Use the configured default schema unless the user explicitly requests a different workflow.
+
+   **Use a different schema only if the user:**
+   - Explicitly requests a specific schema by name → use `--schema <schema-name>`
+   - Asks to "show workflows" or asks "what workflows" exist → resolve the authoritative root by running `openspec context --json` from the current working directory. If the user explicitly selected a registered store, use `openspec context --json --store "<store-id>"`. Then run `openspec schemas --json` with its working directory set to the returned `root.path` and let them choose. This preserves roots selected by a local `store:` pointer or the global `defaultStore`; `schemas` does not accept `--store`. If context reports only `no_openspec_root`, run `openspec schemas --json` from the current working directory instead. Do not use this fallback for invalid or unavailable stores.
+
+   Otherwise, omit `--schema` to preserve the configured default.
+
+3. **Create the change directory**
+
+   Choose one schema form below. If a registered store is selected, append `--store "<store-id>"` to that command and each later OpenSpec command shown below that accepts `--store`.
+
+   Using the configured default:
+   ```bash
+   openspec new change "<name>"
+   ```
+
+   Using an explicitly requested schema:
+   ```bash
+   openspec new change "<name>" --schema "<schema-name>"
+   ```
+   This creates a scaffolded change in the planning home resolved by the CLI with `.openspec.yaml`.
+
+4. **Get the artifact build order**
+   ```bash
+   openspec status --change "<name>" --json
+   ```
+   Parse the JSON to get:
+   - `applyRequires`: array of artifact IDs needed before implementation (e.g., `["tasks"]`)
+   - `artifacts`: list of all artifacts, each with its `status` and its `requires` edges (the artifact IDs it directly depends on)
+   - `planningHome`, `changeRoot`, `artifactPaths`, and `actionContext`: path and scope context. Use these instead of assuming repo-local paths.
+
+5. **Create every artifact in the required set**
+
+   Use a todo list to track progress through the artifacts.
+
+   Loop through artifacts in dependency order (artifacts with no pending dependencies first):
+
+   a. **For each artifact that is `ready` (dependencies satisfied)**:
+      - Get instructions:
+        ```bash
+        openspec instructions <artifact-id> --change "<name>" --json
+        ```
+      - The instructions JSON includes:
+        - `context`: Project background (constraints for you - do NOT include in output)
+        - `rules`: Artifact-specific rules (constraints for you - do NOT include in output)
+        - `template`: The structure to use for your output file
+        - `instruction`: Schema-specific guidance for this artifact type
+        - `skipped`/`warning`: present when the change declares skip_specs and this artifact must NOT be created - stop and pick another artifact
+        - `resolvedOutputPath`: Resolved path or pattern to write the artifact
+        - `dependencies`: Completed artifacts to read for context
+      - Read any completed dependency files for context - always re-read them from disk, even if you saw them earlier in the conversation (the user may have edited them)
+      - If the `instruction` field delegates creation to a specific skill or command, invoke it to produce the artifact instead of writing the file yourself, then verify the artifact file exists at `resolvedOutputPath`
+      - Otherwise create the artifact file using `template` as the structure and write it to `resolvedOutputPath`. If `resolvedOutputPath` is a glob, follow `instruction` to choose the concrete file path
+      - Apply `context` and `rules` as constraints - but do NOT copy them into the file
+      - Show brief progress: "Created <artifact-id>"
+
+   b. **Continue until every artifact in the required set exists (not just `apply.requires`)**
+      - After creating each artifact, re-run `openspec status --change "<name>" --json`
+      - The required set is `applyRequires` plus every artifact reachable from those by following the `requires` edges in `status --json` - walk them transitively (spec-driven closes over proposal, specs, design, tasks). Leave artifacts outside that set alone
+      - `status` is file-existence only, so an `applyRequires` artifact reading `done` does NOT mean its dependencies exist - writing `tasks.md` early marks `tasks` done while `specs` was never written. Use each artifact's `requires` edges, not its `status`, to build the required set: a `done` artifact still lists what it depends on
+      - An artifact already reading `status: "skipped"` is satisfied: the change declares `skip_specs` in `.openspec.yaml`, so its files must NOT exist. Never try to create one
+      - Create every artifact in the required set that is missing, then re-check - creating one can unblock others
+      - Skip one only when `status` already reports it `skipped`, or when its own `instruction` says it is conditional: run `openspec instructions <artifact-id> --change "<name>" --json` and skip only if its `instruction` field marks it optional (e.g. "create only if..."). Spec-driven's `design.md` qualifies; `specs` qualifies only via the `skipped` status above, never by your own judgment. Tell the user, and do not reconsider it
+      - Dependencies are enablers, not gates: if a required artifact is still `blocked` only because you skipped a conditional dependency, write it anyway
+      - Stop when every artifact in the required set is `done`, `skipped`, or was deliberately skipped
+
+   c. **If an artifact requires user input** (unclear context):
+      - Ask the user to clarify
+      - Then continue with creation
+
+6. **Show final status**
+   ```bash
+   openspec status --change "<name>"
+   ```
+
+**Output**
+
+After completing all artifacts, summarize:
+- Change name and location
+- List of artifacts created with brief descriptions, plus any conditional artifact you skipped and why
+- What's ready: "All artifacts needed for implementation are ready."
+- Prompt: "The artifacts are ready for review. When you are ready, run `/opsx:apply`."
+
+**Artifact Creation Guidelines**
+
+- Follow the `instruction` field from `openspec instructions` for each artifact type - it is the authoritative guidance, even for familiar artifact names
+- If the `instruction` field directs you to use a specific skill or command to create the artifact, invoke it instead of writing the artifact directly
+- The schema defines what each artifact should contain - follow it
+- Read dependency artifacts for context before creating new ones
+- Use `template` as the structure for your output file - fill in its sections
+- **IMPORTANT**: `context` and `rules` are constraints for YOU, not content for the file
+  - Do NOT copy `<context>`, `<rules>`, `<project_context>` blocks into the artifact
+  - These guide what you write, but should never appear in the output
+
+**Guardrails**
+- The request that invoked this workflow authorizes planning only. Any implementation or apply instruction in that request does not carry forward. Do NOT implement the change, start the apply workflow, or edit project code during this workflow. After presenting the artifacts, stop and wait for a new user request to start the apply workflow
+- Create every artifact the apply phase transitively depends on, not just the ids listed in `apply.requires`
+- Always read dependency artifacts before creating a new one - re-read from disk, not from conversation memory (files may have changed since you last saw them)
+- Ask about ambiguities that would materially change scope, externally observable behavior, compatibility, or acceptance criteria; for minor details, make reasonable assumptions and record them
+- If a change with that name already exists, ask if user wants to continue it or create a new one
+- Verify each artifact file exists after writing before proceeding to next

.zcode/skills/openspec-apply-change/SKILL.md

@@ -0,0 +1,185 @@
+---
+name: openspec-apply-change
+description: Implement tasks from an OpenSpec change. Use when the user wants to start implementing, continue implementation, or work through tasks.
+allowed-tools: Bash(openspec:*)
+license: MIT
+compatibility: Requires openspec CLI.
+metadata:
+  author: openspec
+  version: "1.0"
+  generatedBy: "1.8.0"
+---
+
+Implement tasks from an OpenSpec change.
+
+**Store selection:** If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run `openspec store list --json` to discover registered store ids, then pass `--store <id>` on the commands that read or write specs and changes (`new change`, `status`, `instructions`, `list`, `show`, `validate`, `archive`, `doctor`, `context`, `view`). Once selected, treat `--store <id>` as sticky for the rest of the workflow. Every unscoped example of those commands below is shorthand: before running it, append the flag. For example, run `openspec status --change "<name>" --json --store "<id>"`, not the unscoped form shown below. Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local `openspec/` root.
+
+**Input**: Optionally specify a change name (e.g., `/opsx:apply add-auth`). If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.
+
+**Steps**
+
+1. **Select the change**
+
+   If a name is provided, use it. Otherwise:
+   - Infer from conversation context if the user mentioned a change
+   - Auto-select if only one active change exists
+   - If ambiguous, run `openspec list --json` to get available changes and ask the user to select one
+
+   Always announce: "Using change: <name>" and how to override (e.g., `/opsx:apply <other>`).
+
+2. **Check status to understand the schema**
+   ```bash
+   openspec status --change "<name>" --json
+   ```
+   Parse the JSON to understand:
+   - `schemaName`: The workflow being used (e.g., "spec-driven")
+   - `planningHome`, `changeRoot`, and `actionContext`: planning scope and edit constraints
+   - Which artifact contains the tasks (typically "tasks" for spec-driven, check status for others)
+
+3. **Get apply instructions**
+
+   ```bash
+   openspec instructions apply --change "<name>" --json
+   ```
+
+   This returns:
+   - `contextFiles`: artifact ID -> array of concrete file paths (varies by schema - could be proposal/specs/design/tasks or spec/tests/implementation/docs)
+   - Progress (total, complete, remaining)
+   - Task list with status
+   - Dynamic instruction based on current state
+   - Optional `context`: current required project instruction input from the selected root
+   - Optional `operationGuidance`: current advisory guidance for apply
+
+   **Handle states:**
+   - If `state: "blocked"` (missing artifacts): show message, suggest using `/opsx:continue` (if it is not installed, run `openspec status --change "<name>" --json` to see the next artifact and `openspec instructions <artifact-id> --change "<name>" --json` for how to create it)
+   - If `state: "all_done"`: congratulate, suggest archive
+   - Otherwise: proceed to implementation
+
+   Treat `context` as a required prompt-level input. Read and consider it, and
+   apply relevant project facts, conventions, and constraints while implementing.
+   Treat `operationGuidance` as optional additive advice. Read and consider every
+   entry, and follow entries that are applicable and compatible with the built-in
+   workflow.
+
+   Keep both fields separate from CLI-returned state, missing artifacts, tasks,
+   progress, `contextFiles`, and the built-in `instruction`. They are not
+   evidence of task completion, do not replace the built-in instruction, and do
+   not permit bypassing a blocked state. If context conflicts with the built-in
+   instruction, an explicit user choice, or a CLI-controlled value, report the
+   conflict and preserve the controlling value. If guidance is inapplicable or
+   conflicts with those controlling inputs, do not follow it and explain why.
+   These are prompt-level behavior contracts, not enforceable checks.
+
+4. **Read context files**
+
+   Read every file path listed under `contextFiles` from the apply instructions output.
+   The files depend on the schema being used:
+   - **spec-driven**: proposal, specs, design, tasks
+   - Other schemas: follow the contextFiles from CLI output
+
+   Do not copy `context` or `operationGuidance` verbatim into implementation
+   files or planning artifacts unless the user separately asks for that content.
+
+5. **Show current progress**
+
+   Display:
+   - Schema being used
+   - Progress: "N/M tasks complete"
+   - Remaining tasks overview
+   - Dynamic instruction from CLI
+
+6. **Implement tasks (loop until done or blocked)**
+
+   For each pending task:
+   - Show which task is being worked on
+   - Make the code changes required
+   - Keep changes minimal and focused
+   - Mark task complete in the tasks file: `- [ ]` → `- [x]`
+   - Continue to next task
+
+   **Pause if:**
+   - Task is unclear → ask for clarification
+   - Implementation reveals a design issue → suggest updating artifacts
+   - Error or blocker encountered → report and wait for guidance
+   - User interrupts
+
+7. **On completion or pause, show status**
+
+   Display:
+   - Tasks completed this session
+   - Overall progress: "N/M tasks complete"
+   - If all done: suggest archive
+   - If paused: explain why and wait for guidance
+
+**Output During Implementation**
+
+```
+## Implementing: <change-name> (schema: <schema-name>)
+
+Working on task 3/7: <task description>
+[...implementation happening...]
+✓ Task complete
+
+Working on task 4/7: <task description>
+[...implementation happening...]
+✓ Task complete
+```
+
+**Output On Completion**
+
+```
+## Implementation Complete
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Progress:** 7/7 tasks complete ✓
+
+### Completed This Session
+- [x] Task 1
+- [x] Task 2
+...
+
+All tasks complete! You can archive this change with `/opsx:archive`.
+```
+
+**Output On Pause (Issue Encountered)**
+
+```
+## Implementation Paused
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Progress:** 4/7 tasks complete
+
+### Issue Encountered
+<description of the issue>
+
+**Options:**
+1. <option 1>
+2. <option 2>
+3. Other approach
+
+What would you like to do?
+```
+
+**Guardrails**
+- Keep going through tasks until done or blocked
+- Always read context files before starting (from the apply instructions output)
+- If task is ambiguous, pause and ask before implementing
+- If implementation reveals issues, pause and suggest artifact updates
+- Keep code changes minimal and scoped to each task
+- Update task checkbox immediately after completing each task
+- Pause on errors, blockers, or unclear requirements - don't guess
+- Use contextFiles from CLI output, don't assume specific file names
+- Do not use context or operation guidance as proof that a task is complete
+- Apply relevant project context; report conflicts with controlling workflow inputs
+- Consider every guidance entry; explain any inapplicable or conflicting advice
+- Do not copy runtime context or operation guidance into implementation files or planning artifacts
+- Preserve CLI-controlled blocked/ready/all-done behavior and completion criteria
+
+**Fluid Workflow Integration**
+
+This skill supports the "actions on a change" model:
+
+- **Can be invoked anytime**: Before all artifacts are done (if tasks exist), after partial implementation, interleaved with other actions
+- **Allows artifact updates**: If implementation reveals design issues, suggest updating artifacts - not phase-locked, work fluidly

.zcode/skills/openspec-archive-change/SKILL.md

@@ -0,0 +1,182 @@
+---
+name: openspec-archive-change
+description: Archive a completed change in the experimental workflow. Use when the user wants to finalize and archive a change after implementation is complete.
+allowed-tools: Bash(openspec:*)
+license: MIT
+compatibility: Requires openspec CLI.
+metadata:
+  author: openspec
+  version: "1.0"
+  generatedBy: "1.8.0"
+---
+
+Archive a completed change in the experimental workflow.
+
+**Store selection:** If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run `openspec store list --json` to discover registered store ids, then pass `--store <id>` on the commands that read or write specs and changes (`new change`, `status`, `instructions`, `list`, `show`, `validate`, `archive`, `doctor`, `context`, `view`). Once selected, treat `--store <id>` as sticky for the rest of the workflow. Every unscoped example of those commands below is shorthand: before running it, append the flag. For example, run `openspec status --change "<name>" --json --store "<id>"`, not the unscoped form shown below. Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local `openspec/` root.
+
+`<capability-path>` is the spec directory relative to `specs/` (for example, `user-auth` or `identity/user-auth`). Preserve the full path from each delta spec when resolving its main spec.
+
+**Input**: Optionally specify a change name. If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.
+
+**Steps**
+
+1. **Select the change**
+
+   If a name is provided, use it. Otherwise:
+   - Infer from conversation context if the user mentioned a change
+   - Auto-select if only one active change exists
+   - If ambiguous, run `openspec list --json` to get available changes and ask the user to select one
+
+   When prompting, show only active changes (not already archived).
+   Include the schema used for each change if available.
+
+   Always announce: "Using change: <name>" and how to override (e.g., `/opsx:archive <other>`).
+
+   **Load current archive inputs before the existing archive checks:**
+
+   After resolving the selected change and planning root, run:
+   ```bash
+   openspec instructions archive --change "<name>" --json
+   ```
+   Keep the same selected-root flags on this command. This lookup is advisory and
+   optional: it only supplies extra prompt inputs, so it must never block archiving.
+   If it exits non-zero or returns invalid JSON — for example on an older CLI that
+   does not support this command yet — continue the archive workflow with no
+   context and no operation guidance. Do not report an error and do not stop.
+
+   A successful response may omit both optional fields. Treat `context` as a
+   required prompt-level input: read and consider it, and apply relevant project
+   facts, conventions, and constraints. Treat `operationGuidance` as optional
+   additive advice: read and consider every entry, and follow entries that are
+   applicable and compatible with the built-in archive workflow.
+
+   Keep both fields separate from built-in steps, explicit user choices, resolved
+   paths, CLI checks, and command contracts. If context conflicts with one of those
+   controlling inputs, report the conflict and preserve the controlling value. If
+   guidance is inapplicable or conflicts with a controlling input, do not follow it
+   and explain why. Do not infer replacement paths, skipped prompts, or flags from
+   either field, and do not copy their text verbatim into specs, change artifacts,
+   or archive summaries unless the user separately asks for it. These are
+   prompt-level behavior contracts, not enforceable checks.
+
+2. **Check artifact completion status**
+
+   Run `openspec status --change "<name>" --json` to check artifact completion.
+
+   Parse the JSON to understand:
+   - `schemaName`: The workflow being used
+   - `planningHome`, `changeRoot`, `artifactPaths`, and `actionContext`: path and scope context
+   - `artifacts`: List of artifacts with their status (`done`, `skipped`, or other)
+
+   **If any artifacts are neither `done` nor `skipped`** (skipped artifacts satisfy the requirement - the change declares skip_specs):
+   - Display warning listing incomplete artifacts
+   - Ask the user to confirm they want to proceed
+   - Proceed if user confirms
+
+3. **Check task completion status**
+
+   Read the tasks file (typically `tasks.md`) to check for incomplete tasks.
+
+   Count tasks marked with `- [ ]` (incomplete) vs `- [x]` (complete).
+
+   **If incomplete tasks found:**
+   - Display warning showing count of incomplete tasks
+   - Ask the user to confirm they want to proceed
+   - Proceed if user confirms
+
+   **If no tasks file exists:** Proceed without task-related warning.
+
+4. **Assess delta spec sync state**
+
+   Use `artifactPaths.specs.existingOutputPaths` from status JSON as the only
+   delta-spec source. If the `specs` entry is missing or
+   `existingOutputPaths` is empty, proceed without a sync prompt and do not infer
+   delta specs from other artifacts.
+
+   **If delta specs exist:**
+   - Compare each delta spec with its corresponding main spec at `<planningHome.root>/openspec/specs/<capability-path>/spec.md` (use the store-aware `planningHome.root` from step 2, not a hardcoded repo path)
+   - Determine what changes would be applied (adds, modifications, removals, renames)
+   - Show a combined summary before prompting
+
+   **Prompt options:**
+   - If changes needed: "Sync now (recommended)", "Archive without syncing"
+   - If already synced: "Archive now", "Sync anyway", "Cancel"
+
+   Route on the answer:
+   - "Cancel" — stop, do not archive
+   - "Archive without syncing" or "Archive now" — proceed to archive
+   - "Sync now" or "Sync anyway" — sync, then verify (below)
+   - Anything else — ask again rather than archiving
+
+   Before a selected sync writes any main spec, run
+   `openspec instructions specs --change "<name>" --json` once with the same
+   selected-root flags. Require a zero exit status and valid artifact-instruction
+   JSON. If the lookup fails or returns invalid JSON, report the error and stop
+   before writing any main spec or moving the change. A valid response with omitted
+   `rules` is the no-rules case. Apply returned `rules` only to the content and
+   form of main specs produced by this merge; do not use them as archive guidance,
+   change CLI behavior, or copy the rule text into any output file.
+
+   Then run the `openspec-sync-specs` workflow inline (agent-driven intelligent merge) for change '<name>', passing the delta spec analysis and the fetched specs-rule snapshot from above, and wait for it to finish. The inline sync must reuse that snapshot without fetching `specs` instructions again. Do not delegate it to a background task — step 5 would move `changeRoot` out from under a sync that is still reading it, leaving the change archived and the main specs never updated. If your agent can only run it by delegation, delegate synchronously and wait for the result.
+
+   Then re-run the comparison from the top of this step against every capability that has a delta spec in `artifactPaths.specs.existingOutputPaths` — not only the ones the sync reports it touched. A successful sync leaves nothing left to apply, so each capability must now read as already synced:
+   - ADDED requirements present
+   - MODIFIED requirements carrying the scenario and description changes named in the delta, with their other scenarios intact
+   - REMOVED requirements gone — and where this sync retired a capability (removed its last requirement, leaving `## Requirements` empty), its main spec deleted rather than left empty; a spec the sync deliberately kept and reported is also a match
+   - RENAMED requirements present under the new name and absent under the old one
+
+   If the sync failed, or any capability does not match, report what differs and stop — do not archive. Nothing has moved and `changeRoot` is intact, so the user can fix the mismatch or re-run the sync and start the archive again.
+
+5. **Perform the archive**
+
+   Create an `archive` directory under `planningHome.changesDir` if it doesn't exist:
+   ```bash
+   mkdir -p "<planningHome.changesDir>/archive"
+   ```
+
+   Generate the target name: use the change name as-is when it already starts with a `YYYY-MM-DD-` prefix; otherwise prepend the current date as `YYYY-MM-DD-<change-name>`. Never stack a second date (same rule as `openspec archive`).
+
+   **Check if target already exists:**
+   - If yes: Fail with error, suggest renaming existing archive or using different date
+   - If no: Move `changeRoot` to the archive directory
+
+   ```bash
+   mv "<changeRoot>" "<planningHome.changesDir>/archive/<target-name>"
+   ```
+
+6. **Display summary**
+
+   Show archive completion summary including:
+   - Change name
+   - Schema that was used
+   - Archive location
+   - Whether specs were synced (if applicable)
+   - Note about any warnings (incomplete artifacts/tasks)
+
+**Output On Success**
+
+```markdown
+## Archive Complete
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Archived to:** the archive path derived from `planningHome.changesDir`/<target-name>/
+**Specs:** <"✓ Synced to main specs" only if the step 4 verification passed; otherwise "No delta specs" or "Sync skipped">
+
+<"All artifacts complete. All tasks complete." — or, if archived with warnings, list them instead (e.g. "Archived with 2 incomplete tasks")>
+```
+
+**Guardrails**
+- Announce the selected change; prompt for selection when it is ambiguous
+- Use artifact graph (openspec status --json) for completion checking
+- Don't block archive on warnings - just inform and confirm
+- Preserve .openspec.yaml when moving to archive (it moves with the directory)
+- Show clear summary of what happened
+- If sync is requested, run the `openspec-sync-specs` workflow inline (agent-driven)
+- Never archive while a spec sync is still in flight — run the sync inline and verify the main specs before moving `changeRoot`
+- If delta specs exist, always run the sync assessment and show the combined summary before prompting
+- Apply relevant runtime context and report conflicts; operation guidance remains advisory
+- Consider every guidance entry and explain any inapplicable or conflicting advice
+- Existing CLI checks, resolved paths, prompts, and command contracts are unchanged
+- Artifact rules constrain only the specs being written and are never operation guidance
+- Never copy runtime context, operation guidance, or artifact-rule text verbatim into output files

.zcode/skills/openspec-explore/SKILL.md

@@ -0,0 +1,308 @@
+---
+name: openspec-explore
+description: Enter explore mode - a thinking partner for exploring ideas, investigating problems, and clarifying requirements. Use when the user wants to think through something before or during a change.
+allowed-tools: Bash(openspec:*)
+license: MIT
+compatibility: Requires openspec CLI.
+metadata:
+  author: openspec
+  version: "1.0"
+  generatedBy: "1.8.0"
+---
+
+Enter explore mode. Think deeply. Visualize freely. Follow the conversation wherever it goes.
+
+**IMPORTANT: Explore mode is for thinking, not implementing.** You may read files, search code, and investigate the codebase, but you must NEVER write code or implement features. If the user asks you to implement something, remind them to exit explore mode first and create a change proposal. You MAY create OpenSpec artifacts (proposals, designs, specs) if the user asks—that's capturing thinking, not implementing. For a new change, scaffold it first as described below.
+
+**This is a stance, not a workflow.** There are no fixed steps, no required sequence, no mandatory outputs. You're a thinking partner helping the user explore.
+
+**Store selection:** If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run `openspec store list --json` to discover registered store ids, then pass `--store <id>` on the commands that read or write specs and changes (`new change`, `status`, `instructions`, `list`, `show`, `validate`, `archive`, `doctor`, `context`, `view`). Once selected, treat `--store <id>` as sticky for the rest of the workflow. Every unscoped example of those commands below is shorthand: before running it, append the flag. For example, run `openspec status --change "<name>" --json --store "<id>"`, not the unscoped form shown below. Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local `openspec/` root.
+
+---
+
+## The Stance
+
+- **Curious, not prescriptive** - Ask questions that emerge naturally, don't follow a script
+- **Open threads, not interrogations** - Surface multiple interesting directions and let the user follow what resonates. Don't funnel them through a single path of questions.
+- **Visual** - Use ASCII diagrams liberally when they'd help clarify thinking
+- **Adaptive** - Follow interesting threads, pivot when new information emerges
+- **Patient** - Don't rush to conclusions, let the shape of the problem emerge
+- **Grounded** - Explore the actual codebase when relevant, don't just theorize
+
+---
+
+## What You Might Do
+
+Depending on what the user brings, you might:
+
+**Explore the problem space**
+- Ask clarifying questions that emerge from what they said
+- Challenge assumptions
+- Reframe the problem
+- Find analogies
+
+**Investigate the codebase**
+- Map existing architecture relevant to the discussion
+- Find integration points
+- Identify patterns already in use
+- Surface hidden complexity
+
+**Compare options**
+- Brainstorm multiple approaches
+- Build comparison tables
+- Sketch tradeoffs
+- Recommend a path (if asked)
+
+**Visualize**
+```
+┌─────────────────────────────────────────┐
+│     Use ASCII diagrams liberally        │
+├─────────────────────────────────────────┤
+│                                         │
+│      ┌────────┐         ┌────────┐      │
+│      │ State  │────────▶│ State  │      │
+│      │   A    │         │   B    │      │
+│      └────────┘         └────────┘      │
+│                                         │
+│   System diagrams, state machines,      │
+│   data flows, architecture sketches,    │
+│   dependency graphs, comparison tables  │
+│                                         │
+└─────────────────────────────────────────┘
+```
+
+**Surface risks and unknowns**
+- Identify what could go wrong
+- Find gaps in understanding
+- Suggest spikes or investigations
+
+---
+
+## OpenSpec Awareness
+
+You have full context of the OpenSpec system. Use it naturally, don't force it.
+
+### Check for context
+
+At the start, quickly check what exists:
+```bash
+openspec list --json
+```
+
+This tells you:
+- If there are active changes
+- Their names, schemas, and status
+- What the user might be working on
+
+Then read the project's own context from the resolved root - `<root.path>/openspec/config.yaml` (or `config.yml`). Use the `root.path` returned above, and skip this if neither file exists:
+- `context`: project background - tech stack, conventions, constraints
+- `rules`: keyed by artifact id - the entries for an artifact apply only when you write that artifact
+
+Ground your thinking in these. They are constraints for you to follow, not content to reproduce: do NOT copy them into the conversation or into any artifact you create.
+
+### When no change exists
+
+Think freely. When insights crystallize, you might offer:
+
+- "This feels solid enough to start a change. Want me to create a proposal?"
+- Or keep exploring - no pressure to formalize
+
+If the user asks you to capture the exploration as a new change, transition seamlessly into the requested capture:
+
+1. Run `openspec new change "<name>"` (with `--store <id>` when applicable) before creating any artifacts. Never create a new change directory under `openspec/changes/` by hand; the CLI scaffold creates required metadata such as `.openspec.yaml`. Keep the selected `--store <id>` on every applicable follow-up `status` and `instructions` command.
+2. Run `openspec status --change "<name>" --json` (append the confirmed `--store "<id>"` only for a registered standalone store), then process the requested artifacts in dependency order. For each requested artifact that is `ready`, run `openspec instructions "<artifact-id>" --change "<name>" --json` (append the confirmed `--store "<id>"` only for a registered standalone store). Before creating a requested artifact, evaluate any condition in its own `instruction` against the explored change; record a deliberate skip instead when the condition does not apply. If a requested artifact is blocked by a direct prerequisite the user did not request, run `openspec instructions "<prerequisite-id>" --change "<name>" --json` (append the confirmed `--store "<id>"` only for a registered standalone store) for that prerequisite whether it is `ready` or `blocked`. If its own `instruction` states a condition, evaluate that condition against the explored change and record a deliberate skip only when the condition does not apply. If the condition applies, or the prerequisite is not conditional, treat it as a normal prerequisite and ask before expanding the capture. Do not create an unrequested prerequisite unless the user approves.
+3. Follow the returned `template` and `instruction` fields. Read completed dependency files listed in `dependencies`, and apply `context` and `rules` as constraints without copying them into the artifact. If the instruction delegates creation to a specific skill or command, invoke it; otherwise write the artifact to `resolvedOutputPath`, using the instruction to choose a concrete path when it is a glob. Verify that the selected concrete output exists.
+4. After creating each artifact, re-run `openspec status --change "<name>" --json` (append the confirmed `--store "<id>"` only for a registered standalone store) and continue until every requested artifact is `done`, `skipped`, or was deliberately skipped because its own `instruction` stated a condition that did not apply. Tell the user about a deliberate conditional skip, remember it, and do not reconsider it. Dependencies are enablers, not gates: if a requested artifact is still `blocked` only because you deliberately skipped a conditional prerequisite, run `openspec instructions "<artifact-id>" --change "<name>" --json` (append the confirmed `--store "<id>"` only for a registered standalone store) despite the blocked status, then create it using step 3 only when those recorded conditional skips are its sole missing dependencies. If a requested artifact is blocked by a prerequisite the user did not ask to capture and cannot be conditionally skipped, explain that dependency and ask before expanding the capture.
+
+Capture the artifact(s) the user requested without asking them to invoke another workflow command. If they asked only to start a change, stop after scaffolding and show its status.
+
+### When a change exists
+
+If the user mentions a change or you detect one is relevant:
+
+1. **Resolve and read existing artifacts for context**
+   - Run `openspec status --change "<name>" --json`.
+   - Use `changeRoot`, `artifactPaths`, and `actionContext` from the status JSON.
+   - Read existing files from `artifactPaths.<artifact>.existingOutputPaths`.
+
+2. **Reference them naturally in conversation**
+   - "Your design mentions using Redis, but we just realized SQLite fits better..."
+   - "The proposal scopes this to premium users, but we're now thinking everyone..."
+
+3. **Offer to capture when decisions are made**
+
+   `<capability-path>` is the spec directory relative to `specs/` (for example, `user-auth` or `identity/user-auth`). Preserve an existing capability's full path and follow the project's established organization for new capabilities.
+
+    | Insight Type               | Where to Capture                    |
+    |----------------------------|-------------------------------------|
+    | New requirement discovered | `specs/<capability-path>/spec.md` |
+    | Requirement changed        | `specs/<capability-path>/spec.md` |
+    | Design decision made       | `design.md`                       |
+    | Scope changed              | `proposal.md`                     |
+    | New work identified        | `tasks.md`                        |
+    | Assumption invalidated     | Relevant artifact                   |
+
+   Example offers:
+   - "That's a design decision. Capture it in design.md?"
+   - "This is a new requirement. Add it to specs?"
+   - "This changes scope. Update the proposal?"
+
+4. **The user decides** - Offer and move on. Don't pressure. Don't auto-capture.
+
+---
+
+## What You Don't Have To Do
+
+- Follow a script
+- Ask the same questions every time
+- Produce a specific artifact
+- Reach a conclusion
+- Stay on topic if a tangent is valuable
+- Be brief (this is thinking time)
+
+---
+
+## Handling Different Entry Points
+
+**User brings a vague idea:**
+```
+User: I'm thinking about adding real-time collaboration
+
+You: Real-time collab is a big space. Let me think about this...
+
+      COLLABORATION SPECTRUM
+      ════════════════════════════════════════════
+
+      Awareness          Coordination         Sync
+          │                   │                 │
+          ▼                   ▼                 ▼
+      ┌────────┐         ┌────────┐        ┌────────┐
+      │Presence│         │Cursors │        │  CRDT  │
+      │  "3    │         │ Multi  │        │Conflict│
+      │online" │         │ select │        │  free  │
+      └────────┘         └────────┘        └────────┘
+          │                   │                 │
+       trivial            moderate           complex
+
+      Where's your head at?
+```
+
+**User brings a specific problem:**
+```
+User: The auth system is a mess
+
+You: [reads codebase]
+
+     ┌─────────────────────────────────────────────┐
+     │              CURRENT AUTH FLOW              │
+     └─────────────────────────────────────────────┘
+                        │
+          ┌─────────────┼─────────────┐
+          ▼             ▼             ▼
+     ┌─────────┐  ┌─────────┐  ┌─────────┐
+     │ Google  │  │  GitHub │  │  Email  │
+     │  OAuth  │  │  OAuth  │  │  Magic  │
+     └────┬────┘  └────┬────┘  └────┬────┘
+          │             │             │
+          └─────────────┼─────────────┘
+                        ▼
+                  ┌───────────┐
+                  │  Session  │
+                  └─────┬─────┘
+                        │
+                        ▼
+                  ┌───────────┐
+                  │   Perms   │
+                  └───────────┘
+
+     I see three tangles. Which one's burning?
+```
+
+**User is stuck mid-implementation:**
+```
+User: /opsx:explore add-auth-system
+      The OAuth integration is more complex than expected
+
+You: [reads change artifacts]
+
+     You're on task 4: "Implement OAuth flow"
+
+     Let me trace what's involved...
+
+     [draws diagram, explores options, suggests paths]
+
+     Want to update the design to reflect this?
+     Or add a spike task to investigate?
+```
+
+**User wants to compare options:**
+```
+User: Should we use Postgres or SQLite?
+
+You: Generic answer is boring. What's the context?
+
+User: A CLI tool that tracks local dev environments
+
+You: That changes everything.
+
+     ┌─────────────────────────────────────────────────┐
+     │          CLI TOOL DATA STORAGE                  │
+     └─────────────────────────────────────────────────┘
+
+     Key constraints:
+     • No daemon running
+     • Must work offline
+     • Single user
+
+                  SQLite          Postgres
+     Deployment   embedded ✓      needs server ✗
+     Offline      yes ✓           no ✗
+     Single file  yes ✓           no ✗
+
+     SQLite. Not even close.
+
+     Unless... is there a sync component?
+```
+
+---
+
+## Ending Discovery
+
+There's no required ending. Discovery might:
+
+- **Flow into a proposal**: "Ready to start? I can create a change proposal."
+- **Result in artifact updates**: "Updated design.md with these decisions"
+- **Just provide clarity**: User has what they need, moves on
+- **Continue later**: "We can pick this up anytime"
+
+When it feels like things are crystallizing, you might summarize:
+
+```
+## What We Figured Out
+
+**The problem**: [crystallized understanding]
+
+**The approach**: [if one emerged]
+
+**Open questions**: [if any remain]
+
+**Next steps** (if ready):
+- Create a change proposal
+- Keep exploring: just keep talking
+```
+
+But this summary is optional. Sometimes the thinking IS the value.
+
+---
+
+## Guardrails
+
+- **Don't implement** - Never write code or implement features. Creating OpenSpec artifacts is fine, writing application code is not.
+- **Don't fake understanding** - If something is unclear, dig deeper
+- **Don't rush** - Discovery is thinking time, not task time
+- **Don't force structure** - Let patterns emerge naturally
+- **Don't auto-capture** - Offer to save insights, don't just do it
+- **Don't manually scaffold changes** - Never create a new change directory under `openspec/changes/` by hand. Always use `openspec new change "<name>"` (with `--store <id>` when applicable) so required metadata such as `.openspec.yaml` is created before writing artifacts.
+- **Do visualize** - A good diagram is worth many paragraphs
+- **Do explore the codebase** - Ground discussions in reality
+- **Do question assumptions** - Including the user's and your own

.zcode/skills/openspec-propose/SKILL.md

@@ -0,0 +1,149 @@
+---
+name: openspec-propose
+description: Propose a new change with all artifacts generated in one step. Use when the user wants to quickly describe what they want to build and get a complete proposal with design, specs, and tasks ready for implementation.
+allowed-tools: Bash(openspec:*)
+license: MIT
+compatibility: Requires openspec CLI.
+metadata:
+  author: openspec
+  version: "1.0"
+  generatedBy: "1.8.0"
+---
+
+Propose a new change - create the change and generate all artifacts in one step.
+
+**Planning boundary**: This workflow creates planning artifacts only. The user request that selected or triggered this workflow authorizes planning only, even if it asks to build or fix something. Do not edit project code. After the planning artifacts are complete, stop. Do not start implementation in the same response, even if the initial request asks for it. Wait for a new user request after the artifacts are presented; then start the apply workflow.
+
+I'll create a change with the artifacts your schema defines. With the default spec-driven schema that is:
+- proposal.md (what & why)
+- `specs/<capability-path>/spec.md` (what the system must do - a delta, not the main spec)
+- design.md (how)
+- tasks.md (implementation steps)
+
+`<capability-path>` is the spec directory relative to `specs/` (for example, `user-auth` or `identity/user-auth`). Preserve an existing capability's full path and follow the project's established organization for new capabilities.
+
+When the user is ready to implement, they must start the apply workflow explicitly.
+
+---
+
+**Store selection:** If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run `openspec store list --json` to discover registered store ids, then pass `--store <id>` on the commands that read or write specs and changes (`new change`, `status`, `instructions`, `list`, `show`, `validate`, `archive`, `doctor`, `context`, `view`). Once selected, treat `--store <id>` as sticky for the rest of the workflow. Every unscoped example of those commands below is shorthand: before running it, append the flag. For example, run `openspec status --change "<name>" --json --store "<id>"`, not the unscoped form shown below. Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local `openspec/` root.
+
+**Input**: The user's request should include a change name (kebab-case) OR a description of what they want to build.
+
+**Steps**
+
+1. **Understand the request and clarify material ambiguity**
+
+   If no clear input is provided, ask the user (open-ended, no preset options):
+   > "What change do you want to work on? Describe what you want to build or fix."
+
+   From their description, derive a kebab-case name (e.g., "add user authentication" → `add-user-auth`).
+
+   **IMPORTANT**: Do NOT proceed without understanding what the user wants to build.
+
+   If the request contains ambiguity that would materially affect scope, externally observable behavior, compatibility, or acceptance criteria, ask the user before creating the change. For minor details, make a reasonable assumption and record it in the planning artifacts.
+
+2. **Determine the workflow schema**
+
+   Use the configured default schema unless the user explicitly requests a different workflow.
+
+   **Use a different schema only if the user:**
+   - Explicitly requests a specific schema by name → use `--schema <schema-name>`
+   - Asks to "show workflows" or asks "what workflows" exist → resolve the authoritative root by running `openspec context --json` from the current working directory. If the user explicitly selected a registered store, use `openspec context --json --store "<store-id>"`. Then run `openspec schemas --json` with its working directory set to the returned `root.path` and let them choose. This preserves roots selected by a local `store:` pointer or the global `defaultStore`; `schemas` does not accept `--store`. If context reports only `no_openspec_root`, run `openspec schemas --json` from the current working directory instead. Do not use this fallback for invalid or unavailable stores.
+
+   Otherwise, omit `--schema` to preserve the configured default.
+
+3. **Create the change directory**
+
+   Choose one schema form below. If a registered store is selected, append `--store "<store-id>"` to that command and each later OpenSpec command shown below that accepts `--store`.
+
+   Using the configured default:
+   ```bash
+   openspec new change "<name>"
+   ```
+
+   Using an explicitly requested schema:
+   ```bash
+   openspec new change "<name>" --schema "<schema-name>"
+   ```
+   This creates a scaffolded change in the planning home resolved by the CLI with `.openspec.yaml`.
+
+4. **Get the artifact build order**
+   ```bash
+   openspec status --change "<name>" --json
+   ```
+   Parse the JSON to get:
+   - `applyRequires`: array of artifact IDs needed before implementation (e.g., `["tasks"]`)
+   - `artifacts`: list of all artifacts, each with its `status` and its `requires` edges (the artifact IDs it directly depends on)
+   - `planningHome`, `changeRoot`, `artifactPaths`, and `actionContext`: path and scope context. Use these instead of assuming repo-local paths.
+
+5. **Create every artifact in the required set**
+
+   Use a todo list to track progress through the artifacts.
+
+   Loop through artifacts in dependency order (artifacts with no pending dependencies first):
+
+   a. **For each artifact that is `ready` (dependencies satisfied)**:
+      - Get instructions:
+        ```bash
+        openspec instructions <artifact-id> --change "<name>" --json
+        ```
+      - The instructions JSON includes:
+        - `context`: Project background (constraints for you - do NOT include in output)
+        - `rules`: Artifact-specific rules (constraints for you - do NOT include in output)
+        - `template`: The structure to use for your output file
+        - `instruction`: Schema-specific guidance for this artifact type
+        - `skipped`/`warning`: present when the change declares skip_specs and this artifact must NOT be created - stop and pick another artifact
+        - `resolvedOutputPath`: Resolved path or pattern to write the artifact
+        - `dependencies`: Completed artifacts to read for context
+      - Read any completed dependency files for context - always re-read them from disk, even if you saw them earlier in the conversation (the user may have edited them)
+      - If the `instruction` field delegates creation to a specific skill or command, invoke it to produce the artifact instead of writing the file yourself, then verify the artifact file exists at `resolvedOutputPath`
+      - Otherwise create the artifact file using `template` as the structure and write it to `resolvedOutputPath`. If `resolvedOutputPath` is a glob, follow `instruction` to choose the concrete file path
+      - Apply `context` and `rules` as constraints - but do NOT copy them into the file
+      - Show brief progress: "Created <artifact-id>"
+
+   b. **Continue until every artifact in the required set exists (not just `apply.requires`)**
+      - After creating each artifact, re-run `openspec status --change "<name>" --json`
+      - The required set is `applyRequires` plus every artifact reachable from those by following the `requires` edges in `status --json` - walk them transitively (spec-driven closes over proposal, specs, design, tasks). Leave artifacts outside that set alone
+      - `status` is file-existence only, so an `applyRequires` artifact reading `done` does NOT mean its dependencies exist - writing `tasks.md` early marks `tasks` done while `specs` was never written. Use each artifact's `requires` edges, not its `status`, to build the required set: a `done` artifact still lists what it depends on
+      - An artifact already reading `status: "skipped"` is satisfied: the change declares `skip_specs` in `.openspec.yaml`, so its files must NOT exist. Never try to create one
+      - Create every artifact in the required set that is missing, then re-check - creating one can unblock others
+      - Skip one only when `status` already reports it `skipped`, or when its own `instruction` says it is conditional: run `openspec instructions <artifact-id> --change "<name>" --json` and skip only if its `instruction` field marks it optional (e.g. "create only if..."). Spec-driven's `design.md` qualifies; `specs` qualifies only via the `skipped` status above, never by your own judgment. Tell the user, and do not reconsider it
+      - Dependencies are enablers, not gates: if a required artifact is still `blocked` only because you skipped a conditional dependency, write it anyway
+      - Stop when every artifact in the required set is `done`, `skipped`, or was deliberately skipped
+
+   c. **If an artifact requires user input** (unclear context):
+      - Ask the user to clarify
+      - Then continue with creation
+
+6. **Show final status**
+   ```bash
+   openspec status --change "<name>"
+   ```
+
+**Output**
+
+After completing all artifacts, summarize:
+- Change name and location
+- List of artifacts created with brief descriptions, plus any conditional artifact you skipped and why
+- What's ready: "All artifacts needed for implementation are ready."
+- Prompt: "The artifacts are ready for review. When you are ready, run `/opsx:apply` or ask me to apply this change."
+
+**Artifact Creation Guidelines**
+
+- Follow the `instruction` field from `openspec instructions` for each artifact type - it is the authoritative guidance, even for familiar artifact names
+- If the `instruction` field directs you to use a specific skill or command to create the artifact, invoke it instead of writing the artifact directly
+- The schema defines what each artifact should contain - follow it
+- Read dependency artifacts for context before creating new ones
+- Use `template` as the structure for your output file - fill in its sections
+- **IMPORTANT**: `context` and `rules` are constraints for YOU, not content for the file
+  - Do NOT copy `<context>`, `<rules>`, `<project_context>` blocks into the artifact
+  - These guide what you write, but should never appear in the output
+
+**Guardrails**
+- The request that invoked this workflow authorizes planning only. Any implementation or apply instruction in that request does not carry forward. Do NOT implement the change, start the apply workflow, or edit project code during this workflow. After presenting the artifacts, stop and wait for a new user request to start the apply workflow
+- Create every artifact the apply phase transitively depends on, not just the ids listed in `apply.requires`
+- Always read dependency artifacts before creating a new one - re-read from disk, not from conversation memory (files may have changed since you last saw them)
+- Ask about ambiguities that would materially change scope, externally observable behavior, compatibility, or acceptance criteria; for minor details, make reasonable assumptions and record them
+- If a change with that name already exists, ask if user wants to continue it or create a new one
+- Verify each artifact file exists after writing before proceeding to next

openspec/config.yaml

@@ -0,0 +1,32 @@
+schema: spec-driven
+
+# Project context (optional)
+# This is shown to AI when creating artifacts.
+# Add your tech stack, conventions, style guides, domain knowledge, etc.
+# Example:
+#   context: |
+#     Tech stack: TypeScript, React, Node.js
+#     We use conventional commits
+#     Domain: e-commerce platform
+
+# Per-artifact rules (optional)
+# Add custom rules for specific artifacts.
+# Example:
+#   rules:
+#     proposal:
+#       - Keep proposals under 500 words
+#       - Always include a "Non-goals" section
+#     tasks:
+#       - Break tasks into chunks of max 2 hours
+
+# Per-operation guidance (optional)
+# Add advisory guidance for how apply and archive work should be conducted.
+# This is separate from artifact rules above.
+# Example:
+#   operations:
+#     apply:
+#       guidance:
+#         - Keep test summaries concise
+#     archive:
+#       guidance:
+#         - Summarize the archive outcome before finishing